layer resistance的例句大全

It is efficient to decrease the resistance of sliding plate on moist and soft soil by airing method, and the rate of resistance decrease is dependent on the pressure, thickness and width of airflow layer between the sliding plate and the soil.

采用气幕法可以有效地减少滑板在湿软土壤上的滑行阻力，其减阻效果取决于滑板土壤间充气层的压力、厚度和宽度等状态参数。

It is shown that the effect of interphase thickness on thermal expansion of 3D-C/ SiC composites lies in its influence on interphase bonding strength and sliding resistance in the debonding layer.

结果表明：①界面相厚度对3DC/SiC复合材料热膨胀性能的影响主要归因于其对界面结合强度和脱黏面上的滑移阻力的影响。

the experimental results show that the laser cladded layer of the specimen possesses higher hardness, wear and corrosion resistance.

试验结果表明，激光熔敷层具有较高的硬度和良好的耐磨抗蚀性能。

The wearing resistance of the surface layer has greatly surpassed that of the substrate. The optimized matching of materials and properties can be realized by laser deposited welding with powder feeding, which provides an effective way for the forming and functional gradient repairing of metal components.

送粉激光堆焊可以实现材料与性能的优化匹配，为金属零件的梯度功能修复和复杂零件的成形提供了一条有效途径。

The coating of a layer of nickel-base nanometer alloy on the key seal surface of a valve part may contribute to a significant enhancement of valve wear resistance and serves as an effective means for reducing the chances of nuclear plant failures.

文中提出在阀门零件的关键密封表面镀上一层纳米镍基合金，可以大大提高阀门的耐磨性，是减少核电站事故的有力手段。

Results show when the surface of the screw are treated by laser namo-alloy, alloy layer can form metallurgy combination, abrasion resistance of the screw surface is raised by 2. 2;

结果表明，螺杆表面进行激光纳米合金化复合处理后，合金化层与基体形成了牢固的冶金结合，表面平均硬度由原来的HV420提高到HV620，螺杆表面的的耐磨性提高了2.2倍；

When satisfied" End surface electrical double layer force+ Interfacial viscosity resistance+ Electrolyte ion binding force Capillary pressure", the liquid can not enter into the tuff; on the contrary, can enter tuff.

满足端部双电层引力+界面粘度阻力+电解质离子束缚力毛管压力时，液体不能进入凝灰岩微层片，反之能进入。

The work of this paper is important to the analysis on the total resistance of a body of revolution, the calculation of the stern flow field and the extension of the calculation of the three-dimensional boundary layer.

本项工作的完成对水下回转体的总阻力分析和尾流场分析有重要的理论和计算参考价值，也是进一步开展三维边界层理论计算的基础之一。

The addition of Y made the microstructure of laser cladding layer fine, thus improved its hardness and wear resistance as well as its high temperature oxidation resistance.

钇的加入，细化了激光熔敷层的组织，提高了敷层的硬度、耐磨性及抗高温氧化性能。

The nickel and iron were selected to be original material. A multilayer structure metal film has been schemed out. This structure enhanced the interface between the films and formed nickel-iron alloy layer, thus largely increasing the temperature coefficient of the resistance.

选择镍和铁作为金属膜材料，设计了金属膜的多层状结构，此结构能够增强膜的界面效应，同时使镍铁层间形成合金层，从而对电阻温度系数的提升有重要作用。

Products quenched by this technique possess of many advantages such as deep quenched layer, good combinations of mechanical properties, low residual stress, high resistance to cracking and high precision, etc.

它具有淬透层深、综合力学性能好、残余应力值低、变形开裂小、精度高等优点，对解决高精度细长冷轧辊等工件的淬火有很好的效果。

According to the structural character of sacrificial layer, poly silicon nano-film is used as strain resistance.

根据牺牲层结构特点，应用多晶硅纳米膜作为应变电阻。

Combining the layer momentum integral equations with the velocity distribution characteristics summarized from modeling experiment under the stoker arches, the theoretical formula of the friction resistance of rear arch surface is deduced and educed.

根据边界层动量积分方程结合拱区模化试验整理的拱区速度分布特性，对火床炉后拱面摩擦阻力进行了理论推导，得出了计算表达式。

The experimental results show that the specimen insulated with 50 mm layer of coating can achieve a fire resistance rating of 2.5 hours, and the steel wire mesh embedded in insulated layer can effectively prevent the layer from cracking and dropping under fire.

耐火试验结果表明，采用50mm厚防火涂料全截面保护的碳纤维加固梁的耐火极限超过了2.5h，防火涂层中增设钢丝网片对约束防火涂层、防止开裂和脱落效果明显。

the high corrosion resistance of the amorphous ni-p alloy deposits is attributed to the phosphorus enrichment on the surface and formation of a protective barrier layer as a hypophosphite anion or a compound ni_2p.

文中还指出，非晶态Ni-P合金高耐蚀的原因，是由于合金表面磷的富集，生成次亚磷酸根阴离子（H2PO2~-）或Ni2P化合物的保护层，使合金进入钝性状态。

the joule heat generated in the interconnect is transferred mainly through the metal lines in each metal layer and through the path with the smallest thermal resistance in each ield layer.

研究表明互连线上焦耳热的主要散热途径为金属层内的金属线和介质层中热阻相对小的路径。

a study on the attrition resistance of the gold-paste layer fused to ni-cr alloy

镍铬合金表面金泥涂层耐磨性的实验研究

a study on the improving the attrition resistance of the gold-paste layer fused to ni-gr alloy through blending ultra-fine zro_2

超细氧化锆对提高金泥涂层耐磨性的实验研究

blending porcelain powder into the gold-paste is a feasible way to improve the attrition resistance of the layer and the surface roughness after polishing has no difference.

在金泥中加入一定比例釉瓷粉是提高金泥涂层耐磨性的可行性方法，釉瓷粉加入后对金泥涂层抛光后表面粗糙度无影响，不影响临床应用；

This observation led to the presumption of a struc-tural model of the electrode and explained the beneficial effects of the intermediate layer on depressing the interfacial resistance of the electrode and improving the adhesive power between both β-PbO_2/ SnO_2 and Ti/ SnO_2.

因而提出了电极结构模型的假设，并且解释了中间层对降低界面电阻，改进β&PbO2/SnO2与Ti/SnO2之间结合强度的有益作用。