liquid alloy的例句大全

The used lanthanum-rich rare earth modified alloy can not only improve the mechanical performance and the flowability but also cause the decline of liquid phase point, alloy surface tension and linear contraction, which is helpful to casting ability.

车圈用材料富稀土变质铝合金不仅改善合金力学性能，经试验可使合金流动性增加，液相点、合金表面张力和线收缩下降，对合金铸造性大为改进。

The process of the high energy ball milling, the process of the flan press and the process of the liquid phase sinter was studied. And the influence of those processes to the property of the Mo-Cu alloy was concluded.

本文从工艺上主要研究了Mo-Cu复合粉末的高能球磨工艺、Mo-Cu粉末生坯的压制工艺、液相烧结工艺以及不同的工艺条件对材料性能的影响。

Zinc alloy has already relatively perfect processing conditions in actual production process, but the research of liquid structure of Zn based alloy is to explore the impact on the solid performance.

锌合金在实际生产应用过程已经具备较为完善的工艺条件，但是对Zn基合金液态结构的研究是探索对固态性能影响的有效途径。

The covalent bond in liquid Al-Si alloy and effect of Sr on the bond

液态Al&Si合金中的共价键及Sr的影响

The rapid analysis of the content of nickle in Ni-Co alloy plating liquid of ultrahard material

超硬材料镍钴合金镀液中镍的快速分析

The main technology of producing Zn-Ni alloy is that nickel pieces are added to liquid zinc and the zinc molten liquid are stirred at 700 ℃ to make nickel dissolve into zinc.

生产锌镍合金的主要工艺是将镍片加入锌液中，在700℃的温度下搅拌锌液使金属镍溶解在锌液中形成锌镍合金。

The results show that the WC particles partially dissolve in the liquid of steel, and the C and W contents substantially increase in the matrix close to the bonding surface, indicating that the alloy element diffusion and transformation occur.

结果表明：WC颗粒溶解于高温钢液，微区内W、C元素的含量显著提高，存在合金元素的相互扩散和迁移；

Research on the Flow of Aluminum Liquid in the Gating System for Aluminum Alloy Wheel

铝合金轮毂低压铸造过程中铝液在浇注系统中流动的研究

by adopting proper alloying with low alloy addition, high ce, acquiring high temperature and high quality iron liquid, and intensifying inoculation, it is possible to increase the rate of finished products of the thinwalled and high-strength gray iron casting including engine block and head.

通过采用低合金化、高碳当量、获得高温优质铁液和孕育处理等措施，可以有效地提高发动机缸体和缸盖等薄壁高强度灰铸铁件的成品率。

Density surface tension wettability and adhesive power of liquid Al and Al-RE Alloy on BN surface

液态Al和Al-RE合金的密度、表面张力及对BN的润湿性和附着功

Manufacturing Ternary Boride Carbide Alloy Clad Material with Liquid Sintering Technology

真空液相烧结法制备三元硼化物硬质合金覆层材料

Experiment on corrosion resistance of W based alloy in liquid Al alloy was conduced.

叙述了钨基合金在铝合金液中的抗蚀性试验情况。

Specific resistance calculation of liquid duality natrium kalium alloy

液态二元钠钾合金电阻率的计算

The solidification modes of liquid phase of semi-solid AZ91D Mg alloy were in close relationship with the degree of supercooling determined by cooling rate.

AZ91D镁合金半固态液相的凝固方式与冷却速度所决定的过冷度有重要关西安理工大学硕士学位论文系。

the temperature distribution of the alnico alloy during shaping as well as the relation of shape of the solid-liquid interface and the pulling velocity is obtained.

进而得出了铝镍钴合金在成形过程中的温度分布规律，以及固液界面形状同抽拉速度的关系。

in gravity casting, good wetting property between liquid aluminum alloy and cast iron is of benefit to bonding;

重力铸造时铝液和铸铁的润湿性能影响结合，润湿性能好能够改善结合效果；

liquid extrusion technology and die design of the aluminum alloy plier cover for pipe wrench

管子钳铝合金钳套液态挤压工艺及模具设计

aluminium alloy and magnesium alloy castings; liquid penetrant inspection

铝合金和镁合金铸件.液体渗透检验

for alloy steel piping system, the liquid temperature shall be higher than the brittle transition temperature of the metal material.

如果是合金钢管道系统，液体温度应高于金属材料的脆性转变温度。

deformation behavior and structure of zr base bulk amorphous alloy in supercooled liquid region by hydrostatic extrusion

Zr基非晶合金在过冷液相区静液挤压的变形行为及结构