load power的例句大全

This paper introduces the basic principle and method of computer simulation for reactive power compensation by giving an example of simulation on DC load of thyristor rectifier device, at the same time, introduces the basic principle and formula of FC+ TCR circuit.

该文通过最基本的晶闸管整流装置控制的直流负载的仿真，来介绍仿真技术的基本原理，基本方法，同时介绍了FC+TCR电路的基本原理和公式。

Spring-loaded tine cultivator tillage machine with power-driven working parts

弹簧加载齿式中耕机驱动型土壤耕作机械

The method on the optimum economical adjustment of regulating peak load on time about the different type thermal power plants is presented.

针对不同型式火电厂（单元制、母管制）的实时调峰负荷优化运行方法进行了研究。

Load real amplitude envelope for the up-link signal, load trapezoid envelope for the tele-powering signal. Insert time jitter, amplitude jitter, harmonic signal characteristics, etc.5.

为上行链路信号加载真实幅度包络，为射频能量信号加载梯形包络，为C接口信号加入时间抖动、幅度抖动、谐波等信号特性。

Time optimal control of load adjustment for hydroelectric generator set operating in large power network

在大电网中并列运行的水轮发电机组有功功率最优时间控制

A power management circuit is designed, which can collect energy in a long time and release the energy to drive load in a short time.

并设计了电源管理电路，实现长时间内对磁电换能器输出电能的收集，瞬间放电，驱动负载工作。

Because the vibration amplitude of the scalper changes with multiple factors such as environmental temperature, time variance nonlinear load and static state press, a vibration amplitude control technique is needed for obtaining the stable vibration amplitude in the power ultrasonic medical system.

由于手术刀的振幅随着环境的温度、时变非线性的负载、以及加压等因素的影响而变化，故此需要对振动系统的振幅进行稳定控制。

Application of Dynamic Programming in Economic Load Distribution Among Generators in a Power Plant

动态规划法在发电厂负荷经济分配中的应用

The supercritical power unit load process is nonlinear, time-variation and multivariable coupling.

超临界参数机组负荷生产过程是一个非线性、参数时变、多变量耦合的被控对象，在保证锅炉和汽轮机稳定运行的同时，还要考虑它们之间动态特性差异，实现锅炉、汽轮机协调控制。

With the increase of the electric network scale, the power system analysis personnel attach importance to the load modeling of Wide Area Power System ( WAPS), the single load modeling method can not meet the demand of WAPS modeling.

随着当前电网规模的日益增大，广域电力系统的负荷建模引起了电力系统分析人员的重视，单一的负荷建模方法已无法适应当前广域电网建模的需求。

And this paper analysis and research the whole system and establish mathematical model, result in which the changing power-load adjusting is the control way of the best Tip Speed Ratio.

本文分析研究并建立系统数学模型，根据系统模型确定最佳叶尖速比的控制采用可变功率负载调节方法。

Integrated AC-DC Power System and Load Flow Analysis

交直流混合输电系统及其潮流分析方法

The Mid-prediction on Power Load of Funing County

抚宁县电力负荷的中期预测

The product features in big load and better extensity, low power consumption, low noise, stable running, easy operation and safe to use.

承载能力大，具有良好的空间性以及动力消耗少、噪音低、运行平稳、易操作、使用安全等优点。

A load forecasting software of CC 2000 based EMS application package is presented. The load forecasting functions, design of database and man machine interface, interface with generation schedule, AGC and power flow in Northeast China Power System are also described.

介绍了基于CC-2000支撑平台的东北电网EMS应用软件中负荷预测软件的各项功能、数据库和人机界面的设计，以及负荷预测与其它应用软件的接口。

With the large-scale wind power integration, the original under& frequency load shedding scheme cannot meet design requirements any more.

大规模风电并网后，使得原有的低频减载方案存在安全隐患。

Research on alternating constant current drive systems for high-power load;

介绍一种全数字控制的高性能交流主轴伺服驱动系统。

Contactor control is used by three-phase load motor in electric power locomotive. Current quick-break protection, inverse time over current protection and single-phase grounding protection can be realized by single chip micro-computer.

电力机车三相负载电动机采用接触器控制方式，可用微型单片机同时实现电流速断、反时限过流及单相接地等保护。

It can be used as an independent relay, including crossing current brake circuit, no braking quick-break circuit, preventing no-load starting transformer inrush current, and avoiding fifth harmonics of overexcitation running for high-power transformer.

它可以作单个继电器用，具有穿越电流制动回路，无制动速断回路，且可防止空投变压器励磁涌流的影响，对大容量变压器还可躲开过励磁运行时五次谐波的影响；

High power RF load design for thermal vacuum and balance test

高功率射频真空热试验负载设计研究