loading limit的例句大全

The ultimate loading limit of No. 1 and No. 4 prosthesis was 57.6 kN and 81.8 kN respectively.

1号和4号假体柄的静载强度极限分别达到57.6kN和81.8kN。

Shakedown analysis of a thick-walled cylinder of elastic-perfectly plastic material is presented in terms of the twin-shear unified criterion. The unified analytical solutions of the loading stress fields, the residual stress fields and the shakedown limit pressure of the thick-walled cylinder are derived.

采用双剪统一强度准则对理想弹塑性材料的厚壁圆筒进行安定性分析，得出了厚壁圆筒加载应力、残余应力及安定极限压力的统一解析解。

The differential curves of limit loading with differential walled thick indicate that values of relative limit loading vary as amount of relative walled thick vary under the yielding state of thick-walled tube.

不同的极限载荷线图说明了在厚壁圆筒处于屈服极限状态下，随着相对壁厚的变化，相对载荷变化的规律。

The limit loading formulae of thick-walled tube with differential strength in tension and compression are derived in the twin shear unified strength theory under the combined actions of both an inner pressure and axial force.

应用双剪统一强度理论，考虑材料的拉压异性和同性，推导了在内压和轴力联合作用下的厚壁圆筒的塑性极限载荷表达式。

Compared with the ong-way thrust ball bearing with keeper in same size, the number of balls of this bearing is more and its axial loading capacity is much higher, its limit rotational speed is low.

与相同外形尺寸的有保持器的单向推力球轴承比较，该种轴承安装的钢球数目多，轴向承载能量较高，极限转速较低。

New criteria of limit strength and ultimate loading capacity design for composite laminates

层合板极限强度判据及其最大承载能力的工程设计

Limit analysis of square reinforced concrete slab under uniform loading in fire

火灾中均布荷载作用下钢筋混凝土方板的极限分析

Experimental Research and Plastic Limit Analysis for Bearing Capacity of Masonry Walls Supported on Frame Under Uniform Loading

框支墙梁在均布荷载作用下承载力的试验研究与塑性分析

Limit analysis of structures under multi& loading systems

多组载荷作用下结构的极限分析

In the Ultimate limit state, ultimate loading capacity is significantly enhanced.

承载能力极限状态下，可以显著地提高梁的极限承载力。

Experimental study on behavior of pre-stressed concrete under flexural tension-compression fatigue loading endurance limit on base

预应力混凝土弯曲拉-压疲劳性能试验研究对称的应力换向循环下的疲劳极限

analysis of beam elastic- plastic limit under random loading effect

随机荷载作用下梁的弹塑性极限分析

through spindle bursting test, the influence of loading path on forming limit is further studied.

通过纺锤形管件实验进一步研究了加载路径对成形极限的影响。

the limit loading diagram is consistent to yielding curves of twin shear stress, mises and tresca criterions;

极限载荷线图与三种屈服准则的屈服曲线是相吻合的；

on the calculation methods for the precast vertical limit loading capacity and its reliable calculation

预制桩竖向极限承载力计算方法及可靠度计算

it has been shown that under heat loading condition, it has a limit working temperature.

研究表明，当复合管处于热加载状态时，复合管存在着极限工作温度；

Export goods declaration time limit for loading 24 hours ago.

出口货物的报关时限限为装货的24小时以前.

In order to further speed the algorithm, a rapid sub-optimal loading algorithm is also presented based on analyzing the bit loss superior limit of the method.

为了进一步提高算法的运算速度，在分析比特分配损失上限的基础上，提出一种快速的次优分配算法。

Increasing the loading level causes a drop for the limit temperature of steel columns.

钢柱所受的外加荷载越大极限温度越低；

Poor loading condition will severely limit the supporting capacity of the supports in soft strata.

受力条件恶化严重抑制着软岩巷道支架支撑能力的发挥.