lock washer的例句大全

Countersunk external toothed lock washer for assembly

GB/T9074.28-1988组合件用锥形锁紧垫圈

Cross recessed small pan head screw and single coil spring lock washer assemblies

GB/T9074.7-1988十字槽小盘头螺钉和弹簧垫圈组合件

Hexagon head bolt and single coil spring lock washer assemblies

GB/T9074.15-1988六角头螺栓和弹簧垫圈组合件

Master cylinder outlet fitting gasket "Cross recessed pan head screw, single coil spring lock washer and plain washer assemblies"

主缸出油接头垫密片“GB/T9074.4-1988十字槽盘头螺钉，弹簧垫圈和平垫圈组合件”

Insert lock washer and tighten lock screw to adjusting cap.

插入锁紧垫圈,紧固调节盖上的锁紧螺丝.

Top view of spring lock washer or spacer with adjustable inside and outside diameters.

内径和外径都可调整的弹簧锁垫圈的俯视图.

Cross recessed countersunk head screw and countersunk serrated external toothed lock washer assemblies

GB/T9074.9-1988十字槽沉头螺钉和锥形锁紧垫圈组合件

After the first casting, the deflection can be checked and modified using shim plates. Top view of spring lock washer or spacer with adjustable inside and outside diameters.

第一次浇注混凝土后，挠度可用垫片调整。内径和外径都可调整的弹簧锁垫圈的俯视图。

Loosen and remove the diaphragm lock nut and lock washer, pressure plate and diaphragm from the valve stem.

松开和拆卸隔膜锁紧螺母和锁紧垫圈，从阀杆上往下压阀盘和隔膜。

note: if minor leakage occurs, remove lock screw, lock washer and cap and lightly tighten packing gland nut.

注：如果出现少量的泄漏，则拆卸锁紧螺丝，然后锁住垫圈和阀盖，然后轻轻紧固填料压紧螺母。

cross recessed raised countersunk head screw and countersunk external toothed lock washer assemblies

十字槽半沉头螺钉和锥形锁紧垫圈组合件

all kinds of standard and unstandardwashers, stampings flat washer tap washer square washer spring lock washer steel washer spring washers

各类规格垫圈，平垫圈，方垫圈，弹簧止动垫圈，冲压件和汽车零配件

Spring lock washer with adjustable inside and outside diameters.

内径和外径都可调整的弹簧锁垫圈.

Hexagon bolts and nuts, hexagon socket head cap screws, thread bar, carriage bolts, Nylon lock hex nut, flat washer, fish bolt set, standard fasteners etc.

六角螺母，六角螺栓，自攻钉，牙棒等。非标件生产与出口。

wheel bolts, nuts, lock nuts, weld nut, spring nut, washer, copper fasteners, stainless steel fasteners and other automotive fasteners.

车轮螺栓、螺母，锁紧螺母，焊接螺母，簧片螺母，垫圈，铜紧固件，不锈钢紧固件，其他汽车紧固件。

Installation flange connecting valve is on diagram . Lock down the connecting bolt after add sealing washer.

安装如示意图,加密封垫后均匀锁紧联接螺栓.

all weather package: heated front seats, heated windshield washer nozzles, heated driver door lock, outside temperature gauge

全部天气封装：加热前排座椅，加热挡风玻璃清洗喷嘴，加热司机门锁，室外温度衡量