lower plate的例句大全

the method of strip shape control of four high medium plate mill is less, and the level of strip shape control is lower.

国内普通四辊中板轧机板形控制手段较少，控制质量精度不高。

analysis and prevention on swing - plate lower split of in - situ concrete and reinforcing bar continuous box girder

钢筋混凝土现浇连续箱梁翼板下缘裂缝分析及防治

minimally invasive plate fixation in metaphyseal comminuted fractures of long tubular bones in lower extremities

经皮微创生物学技术的钢板固定治疗下肢长管状骨干骺部粉碎性骨折

the precision of the press is high, the lower part of the press plate is a straight line guide.

压合精度高，压合板下部独有直线导轨，充分保证高精度平行压合。

copper plate as cathode could guarantee the smooth electrolysis process which had high current efficiency with low cell voltage and lower solubility.

铜作阴极是可行的，既有高的电流效率又有低的溶解性和槽电压，可以保证电解的顺利进行。

application of anterior cervical plate in the treatment of lower cervical injury ( 38 cases report)

颈前路带锁钢板治疗下颈椎损伤（附38例报告）

The secondary phases may be another sympathetic nucleated lower bainitic ferrite plate or lower bainitic Carbide.

实验观察到下贝氏体碳化物在巨型台阶前沿奥氏体内析出,而并非在下贝氏体铁素体内析出.

Summing up, after innovating and emulating for pump structure, stator curve and triangular groove of plate shaft, we believe from result it is possible to achieve double acting piston radial pump with lower noises and its effect will be prominent.

综上所述，通过对泵结构的创新设计，定子曲线和配流轴三角槽的仿真分析，可知实现低噪声双作用径向柱塞泵是可能的，并且效果是很明显的。

The results show that the vulnerable zone of lining refractory and formation zone of slag skull are in a 100 mm range on lining's inner surface from the middle/ lower part of furnace stack and bosh to the front-end of cooling plate.

结果表明，在炉身中下部和炉腹、炉腰部位炉衬内表面到冷却板前端的100mm范围内是炉衬耐材易损区和渣皮形成区；

The end-faces of upper and lower crimping rollers not aligned resulted in clearance between side plate and end-face of crimping roller where broken fibers became black because of.

原因主要是上、下卷曲轮的端面不对齐，侧面板与卷曲轮端面产生间隙，间隙内的碎丝经摩擦高温作用而发黑。

For plate products used in lower wing applications, increased weight savings can be achieved using selective reinforcement in DADT critical areas.

这种金属板应用于低层机翼时，在DADT这种临界领域应用选择性强化理念将会实现更多的重量节省。

It is also found that the test plate processes strong cubic texture and exhibits soft magnetic properties with a coercive force of 3.45A/ m, which is lower than those of the Fe 6.5% Si alloys prepared by other method.

合金板具有强的立方织构并显示出优良的软磁性能，其矫顽力只有345A/m，小于其他方法制备的Fe65%Si合金。

The lower construction is a rectangular plate beam gantry with good rigidity and tensional strength.

下部结构为空间矩型板梁式门架,有较好的刚度和抗扭性能.

The cutting experiment on marble, granite and standard aluminum plate under the same experimental condition shows that the cutting depth of non-porous material is much lower than that of porous material.

对大理石、花岗岩和标准铝板等材料的切割实验表明，在其他实验条件一定的情况下，无孔隙材料的切割深度远低于有孔隙材料。

VEGF expression of human growth plate concentrates on the lower hypertrophic and mineralised regions.

椎体生长板VEGF的表达集中在肥大细胞层下半区及临时钙化层；

The change of pressure in the flow passage of plate thin channel filter device and the main factors effected on the largest theoretical length of plate thin channel filter device at the lower pressure ( < 5 × 10 5Pa) were discussed.

探讨了稳态状态下板式膜过滤器薄层通道中压力变化的规律，并讨论了低压下（＜5×105Pa）影响板式过滤器理论最大过滤组件长度的主要因素。