main laser的例句大全

Using the uniform laser screen and the screen off target to research the EFP warhead, we can access the main parameters, and at the same time, we can get the technical support to test the performance of EFP warhead.

利用匀强激光光幕和丝网断靶对EFP战斗部测试，可以有效的获取目标主要参数，为提高EFP战斗部性能提供了试验方面的技术支持。

It also designed the cold standby system for the power supply in the primary side, which contains the small CT as the main power supply, and the laser power supply as the auxiliary one.

针对一次侧供电，设计了以小CT供电为主，激光供电为辅的电源冷备用系统。

The main content is the following: 1 By using Overlap Integral and covey equations, the amplifing characters of laser amplifier are analyzed. The characters of gain, energy conversion efficiency, and output energy are studied based on theory and simulation in detail.

从交叠积分及输运方程出发，对激光放大器的放大特性进行了理论分析，对激光放大器的增益特性、能量转换效率特性及能量输出特性进行了相关的理论研究及计算模拟。

The strong electromagnetic interference generated in high power TEA CO2 laser system mainly comes from the main discharge circuit, pulse spark switch and power supply.

大功率TEA CO2激光器系统产生的强电磁干扰主要来源于激光器主放电回路、脉冲火花开关和电源。

Twist type surface of robot numeric control auto search plasma quenching system consists of main controller, industry robot, plasma quenching welder, two clamping clip tight devices and laser displacement sensor, etc.

扭型曲面的机器人数字控制自动搜寻等离子淬火系统，由主控计算机、工业机器人、等离子淬火焊机、2套定位夹紧装置和激光位移传感器等组成。

Laser triangulation measurement is one of the main methods of noncontact measurement. Many questions, have been studied in the measuring system, regarded Position Sensitive Detector ( PSD) as the photoelectric sensor.

激光三角测量是非常重要的非接触测量方法，本文研究了以PSD作为光电传感器的测量系统中的一些问题。

The article touches upon the principle of displacement measuring system consist-ing of diode laser focusing lens, reflecting main scale grating, quarternary index scale grat-ing photosensor.

系统由半导体激光器、聚焦镜头、反射式标尺光栅、四裂相指示光栅和光电接收元件组成。

The surface scattering loss ( SSL) in the optical loss of laser reflectors is the main, sometimes fatal influence on the performance and test of high-grade precision and advance instruments.

在激光反射镜的光学损耗里，表面散射损耗（SSL）对高精密的激光仪器性能和实验影响尤甚，有时是致命的。

The system consists of main controller, robot, plasma quenching welder, two fixing-clamping devices for vane, laser shift sensor and so on.

系统由主控计算机、机器人、等离子淬火焊机、2套叶片定位夹紧装置和激光位移传感器等组成。

Main products: Laser engraving and cutting machine, Woodworking center, Plasma cutters.

主营：激光雕刻切割机，木工切割机，等离子切割机。

The main contents are as follows: ( 1) The characteristics of mechanism of excimer laser etching were summarized. By analyzing the excimer laser beam characteristics and the physical properties of Al2O3 ceramics, the physical phenomena occurring in etching process were studied.

主要研究的内容和结论如下：（1）通过分析准分子激光光束特性和Al2O3陶瓷物理化学性质以及它们相互作用的特点，研究了刻蚀过程中发生的物理现象。

The main contents are as follows: 1. An improved adjustable current source is used to design a laser driver circuit with hot-plug function; a large photosensitive area photodiode and a wide dynamic range logarithmic converter are used to design an optical power meter.

主要研究内容如下：1.对可调电流源进行改进，设计出了具有热插拔功能的激光器驱动电路；利用大光敏面的光电二极管和宽动态范围的对数运算放大器，设计出了光功率计。

The effect of the Gaussian distribution of laser amplitude, laser window's function and the acoustic attenuation of medium on correlative peak and the main peak to side lobe is obtained by computer simulation and experiments.

用计算机仿真和实验研究激光高斯分布、窗口函数和超声吸收等因素对相关峰峰值和主旁瓣比的影响。

Mechanism' Analyse of Treatment with Mumps by Laser Radiation on Main and Collateral Channels Acupoints

激光经络穴位疗法治疗流行性腮腺炎

Target characteristics of combat tanks as main attack force of ground forces and their interaction with laser are discussed.

讨论了作为地面部队主要突击力量的坦克的目标特性及其同激光的相互作用。

the main idea of this issue is that irradiating the measured object with laser, light-spot was produced on the surface, and then imaged on ccd surface by triangulation principle.

论文的基本思想是采用激光光源照射被测物体，物体表面产生漫反射光斑，利用三角测量原理，光斑在CCD表面成像。

the unit consists of three parts for detection, electrical source and control. the detection part is a main body and it includes detecting arm, abrasion encoder, laser ranging sensor and central line photoelectric sensor.

该装置包括检测、电源和控制三大部分，检测部分是主体，由检测手臂、磨耗编码器、激光距离检测传感器和中心线光电传感器组成。

the main business metal laser cutting, the welding, hit services and so on sign, plate work processing.

主营金属激光切割、焊接、打标、钣金加工等服务。

main ndt ce techniques such as the building dynamics, impact echo, ultrasonic echo, acoustic emission, radar, laser interference technique and infrared imaging are briefly discussed on their principle, application area, limitations and further research needed from the application point of view.

从应用的角度对NDT-CE中常用的振动分析、冲击回波法、超声脉冲回波法、声发射、雷达、激光干涉以及红外线成象等技术的原理、应用、局限性和发展前景作了简要介绍。

Early experimental and theoretical study of photoelectron population in polarization plane with respect to azimuth angle was reported; the main result was focus on showing angular distribution different, when changing polarized direction of laser fields.

在早期的实验和理论研究中，人们着重关注在极化平面上光电子布居几率随方位角的变化，光电子角分布随着激光偏振状态的变化所展示的不同特点。