main load的例句大全

Horizontal wind load is one of the main load which high-rise and super high-rise structures suffered.

水平风荷载是高层和 超高层 结构的主要设计荷载之一,它可造成工程结构的损伤和破坏,给人民生命财产带来重大损失.

Band scanning radiometer is a main load of FY 1C meteorological satellite. The paper introduces optic design, electronic design, radiation calibration and performance of the component in detail.

详细介绍了用于FY1C卫星的10通道扫描辐射计系统性能、光学设计、电子学设计、辐射定标和主要元部件的指标性能以及卫星发射后的在轨测试结果。

When the side surface is under simple shear load and has a tangential deformation, stress concentrations occur at the fixed end of yarns which are the main load-bearing bodies.

当模型的侧面受到简单剪切而产生切向变形时，在主承载纤维束的固定端产生应力集中。

The bodywork structure is the main load-bearing body in the well car.

承载体是落下孔车中的主要承载件,其设计的优劣将直接影响落下孔车的性能.

The theory analyses and designed applied that apply the big six angle high-strength bolt to main load-bearing join point of large-size skips

大型箕斗大六角高强螺栓节点的分析与应用

This paper presents the roller support swivelling unit with counter rollers, stability calculation of the supporting unit against tilting, calculation of the main load carrying elements of the counter roller component.

文章介绍了采用带反滚轮式的滚轮回转支承装置，支承装置的抗倾覆稳定性计算及反滚轮组件的主要受力件计算。

Main Load Research on Remote Pilotless Helicopter Design Remote Possibilities Remote Control

无人驾驶直升机设计的主要载荷研究

110kV substation: located on the south of gas transmission initial station and the north of fire water area, so the incoming is convenient, and it shall be as close to the main load as possible.

110kv变电站：位于输气首站的南侧，消防水区的北侧，进线方便，尽量靠近主要负荷。

The transmisson system interconnects all major generating stations and main load centers in the system.

该传输系统使所有主要发电站与系统中的主要负载中心相连接.

The small underframe structure is the main load-bearing body in tare special car.

小底架是特种车辆中的主要承载部件.

Beams and columns are main load-bearing structure of tall frames in high buildings.

高层建筑中的高层框架结构体系采用梁、柱作为建筑的 承重 结构.

The structure of slide rail over and under type skid bed drawing steel rail has been introduced, and the strength and rigidity of main load-bearing slide rail have been calculated.

介绍了攀钢轨梁厂钢轨收集装置&滑轨升降式拉钢台架的结构，并计算了主要受力构件滑轨的强度和刚度。

The body and frame structure is the main load-carrying components for the non-load-type body structure. The performance indicators of body and frame structure must meet the performance requirements of automotive products.

对于非承载式车身结构而言，车身与车架结构是其主要的承载部件，因此，车身与车架结构的一些性能指标必须满足相应的使用要求。

Secondly, the background of application, the purpose, the main use, the basical principle and the lateral load pattern of the nonlinear static pushover analysis are discussed.

本文首先介绍了静力弹塑性Pushover分析方法的研究现状，其次论述了静力弹塑性Pushover分析方法的应用背景、目的和主要用途、基本原理以及水平加载模式。

The main equipment was designed to a round shape, which can apply load in any direction. At the same time, this paper designed the tilt table test, which can support the main equipment.

主实验台台面设计为圆形，可实现任意方向施加载荷，同时为实现实验台面的倾斜设计了可摆动的下支撑台面。

Based on the process and characteristics of loading-unloading for the coke terminal of Tianjin Port, this paper analyzes the main foundations of the auto-loading technology system.

在分析了天津港焦炭码头装卸工艺流程、特点的基础上，对焦炭码头的自动化装船工艺系统的主要功能进行了分析，最后阐述了该系统的实际应用效果。

Main content is as follows: in safety stability aspect, tide analysis, static safety analysis and transient safety stability analysis have been conducted under normal condition, maximum load condition and all examine-and-repair conditions;

研究的主要内容如下：在安全稳定性方面，对正常方式、最大负荷方式和所有的检修方式，进行了潮流分析、静态安全分析和暂态安全稳定性分析；

Through analyzing the test results, the load characteristic of Car Dumper is obtained, and the work grade for fatigue analysis of the main structure of Car Dumper is determined. 2.

通过对测试结果的分析得到翻车机的载荷特性，确定了对翻车机主结构进行疲劳分析的工作级别。

As to K-shape joint under design load, while the main tube is in tension, the joint bearing capacity increases as the joint deformation escalates, and the joint has good ductility;

对于K形节点：主管受拉时节点的承载力随变形的增大而不断增加，节点有很好的延性；

Nondestructive testing to load handling device of main hoisting system of a overhead crane

某桥式起重机主起升系统吊具的探伤检验