mass transfer coefficient的例句大全

The results showed that C, Mn and V elements in steel had no effect on the behavior of N in vacuum condition: denitrogen was first-order reaction with mass transfer rate coefficient 0.091 cm/ s.

结果表明，在真空条件下，钢水中的C、Mn、V对N的行为基本没有影响，此时脱N为一级反应，传质速率常数为0091cm/s；

Uncertainty of the partial pressure mass spectrometry calibration system has been evaluated by means of spinning rotor gauge ( SRG), which acts as reference standards. Experiments with SRC include long-term stability and dependence of tangential momentum transfer coefficient on gas species and temperature.

为了评估分压强质谱计校准装置的不确定度，对作为参考标准的磁悬浮转子规进行了大量实验，包括磁悬浮转子规的长期稳定性、切向动量传递系数随气体种类和温度的变化等。

The heat transfer of the disc surface is enhanced with the increase of rotational Reynolds number and non-dimensional mass flow coefficient.

旋转雷诺数和冷气无量纲流量系数的增大都能增强转盘表面的换热效果；

As the input power of the film heat source increased, the heat transfer coefficient of spray cooling decreased and tended to decrease significantly under high mass flux and nozzle pressure.

随着薄膜热源的输入功率的升高，其喷雾冷却的换热系数随之减少。当在质量流量及喷嘴压力较高条件下，这种趋势更为明显。

According to experimental data, adsorptive mass transfer velocity coefficient and adsorption isotherm were calculated and analyzed.

并利用上述实验数据从理论上计算分析吸附总传质系数K（FaV）和吸附等温线。

At invariable temperature and pressure, changing the rotate speed, can mensurate acid/ rock reaction rate at different Reynolds number, then can calculate efficient coefficient of mass transfer of hydrion.

在温度、压力一定的条件下，改变岩盘转速，测定不同雷诺数下的酸岩反应速度，计算出氢离子有效传质系数。

effects of geometry, mass flux, heat flux and vapour quality on the heat transfer coefficient are discussed.

讨论了几何尺寸，质量流量，热流密度和蒸干度对换热系数的影响；

finally, by studying the heat transfer coefficient and the mechanism of mass transfer through the membrane pores, a complete mathematical model was proposed for the removal of voc from dilute aqueous solutions by vmd.

根据对传热系数和膜孔内传质机理的研究，最后得到了真空膜蒸馏脱除水溶液中VOC全过程的数学模型。

The minimum liquid& vapor ratio and the Height of Mass Transfer Unit "HTU" can be obtained in lack of interphase heat transfer coefficient by the model.

利用该模型可以在缺乏相间传热系数的情况下，计算出最小液-汽比及传质单元高度HTU。