material sample的例句大全

In charge of the raw material sample for each lot number.

负责原材料的每批次的接收和留样.

Part-filled Sample Rectangle Waveguide Sensor for Testing Medium and High Loss Dielectric Material

电磁参数测试用部分填充试样矩形波导传感器

On the basis of compression test of a thin-wall cone tube sample of molded pump material, an inverse problem of identifying the elastic constants of molded pulp material is discussed by making use of finite element analysis and digital image correlation method ( DICM).

基于纸浆模塑薄壁圆锥筒的压缩试验，讨论了可以利用有限元分析和数字相关测量方法（DICM）来识别纸浆模塑材料弹性常数的逆问题。

In this paper taking No. 40# axle steel as the test material the writer chose two kinds of shot peening strength for peening the test sample.

以40＃车轴钢为试验材料，选择了两种不同的喷丸强度对试件施喷。

This research can give rough judgment on the thermal conductivity of unknown material as a sample, and ascertain its geometrical boundary condition to fit the experiment so as to improve the metrical preciseness.

本研究可以对未知材料的导热性先给出粗略的判断，然后再确定适于实验的样品的几何边界条件，以提高测量的精确度。

Research results show that different with the alkali ASP flooding which scaling occurs mainly in the production system and scale sample give priority to silicon/ aluminum material, alkalescent ASP flooding scaling occurs mainly in injection system and scale sample give priority to calcium carbonate.

研究结果表明，与强碱三元复合驱结垢主要发生在采出系统和垢样以硅铝垢为主的特征不同，弱碱三元复合驱结垢主要发生在注入系统，垢样以碳酸钙为主。

benzoic acid was used as the combustion adjuvant in determining the incendiary heat of high ignition point material, which can make the successful rate which access to 100% of once fired and the sample fully burns, without affecting the determining result.

通过实验研究了用苯甲酸作助燃剂测定高燃点物质的引燃方法，该法能使实验一次点火成功率达到100%，样品燃烧完全且对测定结果无影响。

Methods Fresh material gelatin filling, X ray photograph, Photoshop disposal technology were employed, and combined with manifold image disposal, such as transparency, splicing and scissoring, and local embalmment, subsection anatomise, and nerve yellow-dying to make sample design.

方法采用新鲜材料明胶灌注、X线摄像、Photoshop的层面处理技术，并结合透明、拼接、剪裁等多种功能图像处理，局部防腐、分部解剖、印模复位以及神经黄染等技术进行标本设计与制作。

Using an active infrared testing technology and flash lamp to heat the sample, we do researches on the material properties and interior structural information.

采用主动式红外检测技术，用闪光灯脉冲热源加热试件，来研究试件材料的均匀性和内部结构信息。

As a sample of application, a visual scene graph about virtual remote material handling simulation system is built with WTK.

并以WTK为工具，结合物料搬运机械的虚拟远程操作，建立了基于WTK的物料搬运视景仿真场景图。

In the sample pretreatment of trace analyte, the common method is analyte extraction by adsorption material.

在痕量物质的样品前处理中，通过吸附材料对样品进行提取和富集是最为常见的方法。

The influence factors of the determination results of CO 2 in the liquid oxygen were discussed, especially on sampling method, humidity temperature, velocity of flow, the sample tube ′ s material, sampling dosage, condensator absorb bottle ′ s number and vaporizing processes.

对液氧中二氧化碳含量测定结果的影响因素包括取样方法，环境温、湿度，取样时样品的流速，取样管材质，取样体积，冷凝管数量及吸收瓶数量等进行了讨论。

The black abstract material which sticks to inside crack of the sample machined by wire-electrode cutting is analyzed and studied by using scanning electron microscope and X-ray energy spectrometer.

应用扫描电镜及X射线能谱仪等设备，对采用线切割制取的裂纹样品内表面的黑色不明物进行了分析。

obviously working in the media is a biased sample, journalists are encouraged to tweet, post or forward funny and unusual material.

显然，在媒体工作是一个带有偏见的例子，记者被鼓励去特推，发布或转发有趣的和特殊的信息。

the sample of spelter alloy: used for fillet material on the glass

锌合金样品————拉制玻璃嵌条材料

production material control pilot production pilot sample part per million quality assurance

试验产品试验样品百万分率品质保证生产物料控制

this paper researched on the strengthening process of the k9 optical glass. this process used heat treatment, acid etching, ion exchange to strengthened optical glass, and strengthened again the sample which can not get a well effect. it can save material and reduce cost.

本文研究了K9光学玻璃的强化工艺，采用热处理、酸腐蚀、离子交换三种方法的综合来强化光学玻璃，并对强化效果不好的试样进行二次强化，从而节约材料，降低成本。

Build up and manage a strong reference sample data base including various material, components and products.

建立管理标签样品数据库包括各种各类的原材料 、 合成品和产品.

The dimension, shap, loading direction, sampling direction, matched gap, length, loading speed, material and quantity of sample etc, 9 factors has been researched.

试验研究了尺寸、形状、受力方向、配合间隙、试件长度、加载速度、取材方向、材料种类、试件数量等9种可能的影响因素的影响。

For the sake of simplicity, no complex agent determination has been implemented in this sample, but rather the initiator of the material creation is also the approver.

为简单起见，这个示例不实现复杂的代理决策，即材料创建的发起者同时也是审批者。