mathematic model的例句大全

Considering the actual conditions, basic mathematic model of planning of sewage plants is modified properly in the thesis. The limitation for traditional tentative method and mixed integral planning method to solve the model is analyzed also.

本文在考虑实际条件的情况下，对污水厂厂群规划的数学模型进行了改进，分析了传统的试探法和混合整数规划法求解该模型的局限性。

Secondly, combining practical survey method and time-resistance mathematic model, the author obtained average time distance from every time-cell to fictitious time center, isotime curve figure ( by Arc view 3D analyze) and temporal shape.

然后利用实际测量法和理论公式法计算出深圳特区各时间单元的平均时间距离，并用Arc view中的3D分析模块自动生成等时线图。

We also present a control system of terminal pressure system and build mathematic model.

提出对终端压力系统进行连续量控制，建立了终端压力系统数学模型，由于系统参数的时变性，提出了基于BP网络整定的PID控制算法，并进行了仿真研究。

We use least squre method to form conicoid mathematic model and fit the point cloud which has been grouped by octree subpision method.

应用最小二乘法建立二次曲面的数学模型，对于已用八叉树分组的点云数据实现隐函数拟合。

The original intention of paper is to carve out a new way based on mathematic model for city water supply price and offer an effective calculation way.

本文研究的初衷就是希望通过具体数量模型的构建，为城市水价的确定开拓一条新思路，同时提供一个有效、实用的理论指导方法。

The mathematic model of vector gravimetry is deduced from the second motion law of Newton within inertial frame, according to which a basic principle of computing vector gravity using position and velocity information deduced from strap-down INS and GPS is described.

根据牛顿第二运动定律，详细导出了矢量重力测量的数学模型，介绍了用捷联惯导系统和卫星定位系统测量重力矢量的基本方法。

Investigation on the mathematic model of thermal boundary resistance for thin-film high-T_c superconductors based on the peeling stress

基于热应力的高温超导薄膜界面热阻模型研究

The mathematic model was established for optimized design of thermal coupled divided wall column of distillation process by simplifying it to a sequence of three distillation columns.

通过简化为一个带有三塔的简单塔序列，建立其精馏过程优化设计的数学模型。

The mathematic model of thermal drive parts was deduced from the thermal conduction differential equation, and the model parameters were determined based on the experiments and step-by-step fitting method, then the combined control strategy of time optimum control and temperature double-ring control was adopted.

由导热微分方程推导热驱动部件的数学模型，在实验的基础上采用分段逐级拟合指数型函数的方法确定此模型的参数，然后采用时间最优控制和双环温度控制相结合的策略。

The Establishing and Analysing of the Mathematic Model of Thermal Conduct in Fraction Material

摩擦材料中热传导模型的建立及分析

In this article, based on the large-scale off-design mathematic model, a thermal parameter fault diagnosis system is set up for nuclear power steam turbine.

利用核电汽轮机热力系统大范围变工况（全工况）数学模型建立核电热力系统故障诊断系统。

Based on the balance of energy, the mathematic model of soil cool thermal storage and release process of inner and outer pipe in the buried pipe bundle was established.

并在能量平衡的基础上，建立了埋管管束内层及外层盘管蓄冷、释冷过程的数学模型。

In this thesis, based on PMV-index which is used to evaluate indoor thermal comfortable degree, a mathematic model is proposed to evaluate outdoor thermal comfortable sense of human body.

本文根据室内热舒适指标PMV，建立了评价户外热舒适的数学模型；

A mathematic model of transient thermal process in welding is established to simulate the moving of the heat source.

建立了焊接瞬态温度分布数学模型，解决了焊接热源移动的数学模拟问题；

A mathematic model used for cracking furnace of acetic acid toacetic anhydride with two section of reaction coil has been set up.

本文建立了以醋酸为原料制取醋酸酐的两段管裂化炉数学模型。

A mathematic model coupled mass-transfer and reaction to match bubble column reactor with outside circulation for liquid-phase catalytic oxidation of ethylene was established. The Gear algorithm was adopted because the model was a kind of stiff ordinary differential equations.

以乙烯氧化生产乙醛的外循环鼓泡塔反应器为对象，建立了传质和反应耦合的数学模型，该模型为刚性常微分方程组，采用Gear算法求解。

The anti-seismic analysis is carried out for dry-type air-core reactor. The calculation basis and mathematic model are given. The basic natural vibration period, seismic stress and the calculating formula for safety-check are all presented here.

对干式空心电抗器总称结构进行了地震分析，提出了计算依据与数学模型，给出了基本自振周期、地震力以及安全校核的实用计算公式。

Through application of mathematic model for flow and atomization within Y-Jet nozzle, the authors designed and verified nozzles required for spray water humidifying desulfurization experiment to be made in humidification activation reactor with 6 meter height and square cross section 590 × 425.

通过应用Y型喷嘴内流动和雾化的数学模型，对高6m，方形截面590×425mm的增湿活化反应器上进行喷水增湿脱硫试验所需喷嘴进行了设计和校核。

The mathematic model of container truck path is established and the allocation algorithm for container truck is presented.

分析影响集装箱码头前沿生产的因素，建立集卡路径的数学模型及其调度算法。

It is important to set up a mathematic model for an ER damper.

电流变减振器的理论建模是一项十分重要的工作。