measured load的例句大全

measured load parameters of henan power network and theirinfluences on system stability

河南电网实测负荷参数及其对电网的影响

particularly "hanging rope" of the dynamics simulations, can effectively resolve the issue of the measured load to be done;

特别是对抽油机“悬绳”的动力学模拟，可以有效解决实测载荷加载问题；

With a task queue per CPU, work can be balanced given the measured load of all CPUs in the system.

利用每个CPU的任务队列，可以根据系统中所有CPU的负载进行负载平衡。

According to standards of the International Welding Society and British Standards, with the finite elements static strength results and the actually measured load spectrum, the fatigue life comparison analysis is made for the modes of typical welded joints at key parts of an exported coal car body.

基于国际焊接学会标准和英国标准，结合有限元静强度结果和实测载荷谱，对某出口运煤车车体关键部位典型焊接接头形式进行了疲劳寿命对比分析。

In this paper, an analytical procedure is presented to calculate the J-R resistence curve on the basis of analysing the relationship between the three curves, the measured load-displacement curve, the imaginary load-displacement curer and the ductile crack extension-displacement curve, from one specimen.

在三曲线关联分析的基础上，提出了一种新的单试样测定J R阻力曲线的方法和步骤，编制了计算机应用程序。三曲线为：试验载荷-位移曲线；

The measured results show that with the effects of the soil reacting force and the groundwater pressure, the rafts are of certain load contributory proportions, and the building is of a small subsiding quantity and an uniform subsidence as well.

测试结果表明：筏板受土反作用力及地下水压力的作用，具有一定的荷载分担率，建筑物的下沉量小且较均匀。

Maximum oxygen intake ( VO 2max), maximum work allowance ( WATT) and others were measured with a cardiopulmonary function instrument made by Jaeger company through a continuous Load adding method, ramp pattern plan.

用Jaeger公司产运动心肺功能仪，采用连续递增负荷方案测定最大摄氧量（VO2max），最大功率（WATT）等。

5-parameter power spectrum model is established by parametric identification for measured sprocket load;

对实测驱动轮载荷进行参数识别，建立了五参数功事谱模型；

And its critical load measured by indentation test, is as high as 1000 N.

压痕法测试其临界载荷达1000N。

Whereby the modulus of elasticity E and yield strength are measured from recorded load-displacement curves.

用自动描绘的力变形曲线测得弹性模量E和屈服强度σ（0.2）。

The load capacity and deformation of a 10-m spanned gabled arch steel frame were measured with static loading conditions.

为研究门式拱架轻型房屋钢结构在静力荷载作用下平面内的受力性能和变形特性，对一榀跨度10m门式拱架进行静力加载试验。

the axial clearance is one of the main parameters of the rolling bearing; measured clearance value is closely related to the measuring method and load.

轴向游隙是滚动轴承的关键指标参数之一，测量方法、测量载荷与测得的游隙值的大小密切相关。

The high sensitive laser interferometer of checking minuteness phase shift 0.2 ° was built using the way of heterodyne and phase track. The line mass-density of gas puff Z-pinch load was measured.

介绍了采用外差式记录系统和相位跟踪方法建立的高灵敏度（0.2°）迈克尔逊激光干涉系统对Z-pinch喷气负载质量线密度的测量。

Through the model test on three groups of new and old plain concrete underpinned columns, the shear strain translation rule of the concrete surface, the crack load and the failure load were measured.

通过3组新老素混凝土托换柱模型试验，测得模型表面混凝土的剪应变变化规律、开裂载荷、破坏载荷。

The heat radiation in cylinder of a high speed light load compression ignition engine is measured using a heat radiation sensor.

在一台小型高速单缸压燃式发动机上，利用商用辐射传感器测量了缸内辐射传热量。

Contrasting various pre-loading methods, hydraulic system is applied to control torque, the relationship of hydraulic pressure and torque is measured through tests and more visual.

本论文在对比各种旋紧方法之后，采用液压系统实现扭矩控制，通过试验测定液压压力与扭矩之间的关系，扭矩控制更加直观和准确。

measured results from γ-sampling at some control station were under correction owing to the effect of the various load weights of some uranium ore.

本文叙述了不同铀矿石装载重量对检查站Υ取样工作结果的影响。

this paper presents the study of 100w two-stage ac/ dc converter. the measured full load efficiency of the converter is more than 88.9%, and the open-load loss is less than 0.74w over the universal line range.

对100W两级AC/DC变换器效率和空载损耗进行了研究，提出了改进电路，使变换器的满载效率在宽交流输入电压范围内大于88.9%，空载损耗小于0.74W。

electro magnetic suspend system damping of a test rig, whose maximum axial load is 10 kn, for measuring inertia moment has been measured by using twist vibration method, and the results show that the damping force of radial magnetic bearing is dominant.

采用扭摆振动振幅测试法，对轴向最大负荷为10kN的转动惯量测试台磁悬浮系统的电磁阻尼进行了实验研究，结果表明该磁悬浮系统中径向电磁轴承的电磁阻尼起决定性作用。

according to torque-speed curve of diesel engines through the measured transmission, configure drive motor and gear box of the drive axle load test bed.

依据柴油发动机经被测变速箱的扭矩&转速曲线，配置了驱动桥加载试验台的驱动电机和减速箱。