measuring position的例句大全

Market share is an important index in measuring dominant position.

市场占有率的高低是衡量市场支配地位的一个测量指标。

Use an advanced laser measuring system to inspect position accuracy, pith, and backlash compensation of machine body.

运用先进的高科技雷射量测系统来检测机台的定位精度、螺距及背隙补偿。

Many measuring methods can be reduced to accuracy measuring pixel position on CCD.

在许多测量中常可归结为精确测量CCD上像点的位置。

This article introduces a new way which applies absolute zero position system of grating digital readout-instrument to measuring large diameter.

介绍了一种采用光栅数显装置的绝对零位系统进行大直径测量的新方法。

By the ray tracing in the channel waveguide, the dependency of the launching efficiency on the relative position of the pumping beam to the waveguide is analyzed and the coupling conditions are optimized. A NEW METHOD MEASURING QUALITY FACTOR Q OF A RESONATOR AT MILLIMETER WAVEBAND-QUASI-OPTICAL METHOD

通过几何光学法追迹泵浦光线在波导中的传播，系统地分析了泵浦光束与波导相对位置变化对泵浦耦合效率的影响，进而确定最佳耦合条件。毫米波波段谐振腔Q值测量的准光学法

The measurement method can be used for real-time measuring dynamic small bending and settling angle introduced by relative position changing under rotating.

它适用于旋转运动中的高精度光学件或机械件相对位置变化的实时动态小弯沉角测量。

Three Position Field Test for Inertial Measuring Unit

惯性组合三位置现场测试方法

The measuring instrument integrates both the measuring technology of the form& position error and the technology of virtual instrument, which can measure the roundness error, and display the roundness error graph directly on a screen.

该测量仪将形位误差测量技术与虚拟仪器技术相结合，解决了圆度误差的测量问题，并且将圆度误差图形在屏幕上形象、直观地显示出来。

It is found that the peak position of P-2 shifts towards higher temperature under higher measuring frequency.

变频实验发现随着测量频率升高，P2峰移向高温，计算所得激活能为0.13eV。

Its position resolution is 3 mm with the peak to valley ratio being 2.6. The time of measuring a specimen is about one minute.

对于~3H核素的位置分辨率达3mm（峰谷比为2.6时）。测一个样品仅需1分钟。

Measuring of Object Deformation Based on Position Changed through Resuming the Correlation of Speckle Field Images

基于散斑场相关性恢复的大变位情形下物体变形测量

Laser triangulation measurement is one of the main methods of noncontact measurement. Many questions, have been studied in the measuring system, regarded Position Sensitive Detector ( PSD) as the photoelectric sensor.

激光三角测量是非常重要的非接触测量方法，本文研究了以PSD作为光电传感器的测量系统中的一些问题。

Application of Global Position System in Measuring Signal Frequency and the Stability of Signal Frequency

全球定位系统在频率及其稳定度测量中的应用

Application of GPS ( Global Position System) in Measuring of Bridge Construction

GPS定位技术在桥梁施工测量中的应用

According to the protective speed curves, the tracking measuring function of infrared laser position transducer is applied for back-up protection of travel speed.

根据保护速度曲线用红外激光位置传感器的跟踪测量功能实现速度的后备保护。

The present situation of the difficult measurement of aperture size and relative position of Brake master cylinder. To solve the problem, this paper desire an endoscope telecentric measuring instrument.

汽车制动主缸补偿孔大小和相对位置难以测量的现状一直困扰着汽车制造业，为了解决这一难题，本文有针对性的设计了一台内窥远心测量仪。

Experimental results show that the position accuracy is 0.03 μ m and the measuring accuracy is 0.1 mm. The repeatability and accuracy of the method can meet the demand of wheel set maintaining.

实测表明，该方法的定位精度为0.03mm，测量精度为0.1mm，重复性较好，测量结果可满足车辆段修现场使用要求。

Measuring Method and Analysis of Taper for Taper-face Position Ring

锥面活塞环锥度测量方法和不确定度评定

In this paper, the new measuring method of taper-face position ring is introduced.

介绍了一种新的锥面活塞环测量方法。

auto measuring the position error of proportional spacing circles of part with the dmis programs by cmm

在三坐标测量机上用DMIS程序实现分度圆位置度的自动测量