melting的例句大全

The mobility test part comprises a sprue gate, a melting liquid cavity and an exhaust hole.

流动性试验部件包括浇注口、熔液腔和排气孔。

The melting point of A theanine is 224 ℃.

A型茶氨酸的融点为224℃。

Tetrazole compounds and its salts have high formation enthalpy, high melting points, low vapor pressure and good thermal stability, which is a kind of promising energetic compounds.

四唑类化合物及其盐具有生成焓高，熔点高，蒸汽压低，稳定性好等特点，是一类很有发展潜力的含能材料。

Niagara Falls formed about twelve thousand years ago when huge melting sheets of ice formed the Great Lakes.

尼加拉瓜瀑布形成于一万两千年以前，与此同时，融化的巨大冰川形成了北美洲五大湖。

Bishop Fredrick Shoo, the bishop elect of the Evangelical Lutheran Church in Tanzania, has been planting trees with 100000 of his parishioners upwind of Mount Kilimanjaro for 12 years, in hopes of cooling the hot, dry winds that are melting the mountain's glaciers.

坦桑尼亚福音信义会（Evangelical Lutheran Church）的当选主教弗雷德里克·休（Fredrick Shoo）已经和10万教民沿乞力马扎罗山植树12年，吹经此地的风炽热而干燥，会融化山上的冰川，他们希望此举能降低风的温度。

Copper-Molding Machine Melting Furnace Temperature Controlling System Based on DSP

基于DSP的铜材成型机熔炉温控系统设计

Scheduling algorithm of identical batch processing machines with non-identical melting jobs.

不一致熔炼任务的同型机批调度算法研究。

There were a partial melting layer of the upper crust or magma chamber for circulation and deposition of copper-bearing hydrothermal fluids;

要有上地壳的部分熔融层或岩浆房，以提供含铜热液的循环沉淀条件；

However, under the framework of new economic geography theory, theoretical analysis on iceberg cost structure and melting mechanism of transportation infrastructure, especially the theoretical and empirical research of economic agglomeration effect of transportation infrastructure, is far from enough.

但是，新经济地理理论框架下，对交通基础设施在冰山成本构成与融化机制的理论分析，特别是交通基础设施经济集聚效应的理论和实证研究尚不充分。

Low content titanium added by direct electrolytic method is a new technique of production compared with traditional method which added by melting.

在电解生产铝的过程中直接加钛，与传统的熔配加钛方式相比，是一种新的低钛合金化方法。

According to different ratio of raw materials for the refining of molten slag and steel temperature measurement balance test, analyzed and discussed refining slag basicity and components of the refining slag and steel melting temperature of inclusions morphology in the same Si 、 Mn deoxidization conditions.

按不同的原料配比进行了精炼渣的熔化温度测定和钢渣平衡试验，在相同的Si、Mn脱氧条件下，分析讨论了精炼渣碱度和组分对精炼渣熔化温度和钢中夹杂物形态的影响。

In this paper, the effect of scrap melting on the temperature of bath has been studied by water model experiments physically simulating to the oxygen top-bottom combined blowing process.

本文在实验室条件下，通过水力学模型对实际转炉炼钢过程进行物理相似模拟，研究了在氧气复吹操作制度下，废钢熔化对熔池冷却效果的影响和规律。

A measuring device for melting and crystallization parameters of slag has been developed using single thermal couple which not only is as a measuring temperature element, but also as a heating element with the characteristics of higher speed of temperature going up and lowering and higher measuring efficiency.

研制了热丝法炉渣熔化和结晶参数测定仪，该测定仪用一根双铂铑热电偶丝既作加热元件又作测温元件，具有升、降温速度快，测量效率高的特点。

This approach enable us to simulate the thermal properties including specific heat capacity, melting temperature, thermal expansion coefficient and thermal conductivity of film containing more than 105 atoms easily with ordinary microcomputer.

该方法使我们利用普通微机能很容易地对包含超过105个原子的晶体薄膜的比热、熔化温度、热膨胀系数、热传导系数等热学性质进行模拟。

Melting and freezing problems involving multiple phase change moving boundaries of phase change materials ( PCM) in thermal storage systems under periodically heating cooling boundary condition of the third kind are modeled, and the transient temperature distributions and phase front time marching images in PCM are obtained.

对一类热储能系统中，相变材料在周期性加热冷却第三类边界条件下出现的多重相变运动边界问题进行了模拟，得出了系统内部瞬态温度分布及相变界面随时间推进的变化图象。

However, due to high melting point of tungsten and ductile-brittle transition temperature, crocodiling, lamination and cracking were easily formed in roll processing.

由于金属钨的高熔点、高韧-脆转变温度，因此钨板在轧制过程中易出现张嘴，分层，开裂等现象。

It provide a scientific basis for the electrode melting velocity control and the temperature control of the ingot solidification process, and have a certain value for the actual production.

本文采用的研究方法为目前国内铸造行业研究的热点，为电极熔速的控制和钢锭凝固过程温度控制、结晶器设计等提供了科学依据，对实际生产工程有一定的应用价值。

Adopts the Enthalpy method to numerically simulate the temperature field of melting/ solidification process in the surface layer of a stainless steel due to Nd: YAG pulsed laser treatment.

采用焓方法对Nd：YAG脉冲激光导致的不锈钢材料表面熔凝过程的温度场进行了数值模拟。

Microstructure and Properties of Magnesium Matrix Composite Fabricated by Low Temperature Reaction Melting

低温反应自熔制备Mg基复合材料的组织与性能

In-Situ Fabricated MgO Particulate Reinforced Magnesium Matrix Composite by Low Temperature Reaction Melting

低温反应自熔法原位合成MgO颗粒增强镁基复合材料