melting point的例句大全

However, due to high melting point of tungsten and ductile-brittle transition temperature, crocodiling, lamination and cracking were easily formed in roll processing.

由于金属钨的高熔点、高韧-脆转变温度，因此钨板在轧制过程中易出现张嘴，分层，开裂等现象。

Finally, by employing mechanical properties test, it shows that the tension strength, elastic modulus and micro-hardness of Mg-Ti alloys have increased evidently with joining Ti due to the high tension strength and melting point as well as high elastic modulus of Ti.

通过对Mg-Ti合金进行力学性能测试表明，在Mg中加入高强度、高熔点、高弹性模量的Ti，显著提高了材料的抗拉强度、弹性模量和显微硬度，且它们随着Ti含量的增加而增加。

The melting point and the shear strength of Bi-Pb-Sn-Cd fusible alloys were determined by DSC and tension tester.

利用差热分析仪和拉伸试验机，研究了易熔合金Bi-Pb-Sn-Cd的成分对合金熔点和剪切强度的影响。

The Effect of Mineral Matter in Coal on the Ash Melting Point with Ternary Phase Diagram

煤中矿物质对灰熔融温度影响的三元相图分析

Measurement many thermophysical properties datum of metallic materials at melting point temperature

金属材料熔点温度多个热物性的测试

The new technology process was obtained by replacing the self-plugging items of injection mould with fusible core which was made of low melting point alloy, melting the fusible core while thermosetting plastic and taking out the product by replacing self-plugging core with fusible core.

用低熔点合金制成可熔型芯替代注射模具中的抽芯部件，在升温固化制件的同时熔化可熔型芯，用熔芯代替抽芯取出制件。

Secondly, compared with those coarse filaments, the thin filament in the yarn has a higher degree of orientation, crystallinity, melting point and lower heat shrinkage. STUDY ON THE PERFORMANCE OF BLENDED THICK AND THIN POLYESTER FILAMENT

第二，与粗的单丝相比，细的单丝表现出更高的取向度、结晶度，熔点和更低的收缩率。共混法涤纶粗细节丝的性能研究

Fraction of different melting point can be separated by thin layer chromatography.

可以用薄层色谱方法分开具有不同熔点的级分。

Influence of time step on the calculated melting point of Cu

时间步长对铜平衡熔点模拟计算结果的影响

Fitting to lower melting point of tin-lead solder, the length of zone of heating is 150mm;

由于含铅钎料熔点低，受热区长度只要150mm就可以了。

Titanium diboride possess an unusual combination of property, such as high hardness, high melting point, low electrical resistivity, sodium corrosion resistance and good wettability with liquid aluminum.

二硼化钛具有高硬度，高熔点，低导电，可与铝润湿性，能抵御钠和电解质侵蚀的特点。采用二硼化钛阴极涂层，可以阻止炭阴极对钠的吸收；

As one of the most promising engineering ceramics, titanium diboride ( TiB2) possesses excellent physical and chemical properties such as high melting point, high modulus, low density, good chemical stability, high hardness and excellent electric conductivity.

二硼化钛（TiB2）是B和Ti的最稳定化合物，是一种具有优良物理化学性能的工程陶瓷材料，具有高熔点、高硬度、高模量、低比重和耐腐蚀等优点。

Molybdenum disilicide can be used as anti-oxidation coating of refractory metals molybdenum and alloys for high temperature, which is due to the higher melting point, thermal shock resistance, good thermal conductivity and excellent high temperature oxidation resistance.

二硅化钼因较高的熔点、抗热冲击性、良好的导热性和优异的高温抗氧化性能可作为难熔金属钼及其合金高温抗氧化涂层。

Many advantages of titanium alloy meet the requests of aviation, space navigation and atomic pile to metal material, for example high specific strength, good corrosion resistant, high melting point and excellent performance at elevated temperature.

钛合金比强度高、耐腐蚀性好、熔点高、高温性能好，因而能满足航空、宇航、核反应堆等尖端技术领域的严格要求。

And discussed the relationship between crystallinity degree, thermal stability, cross linking degree and melting point.

并探讨了聚酯，结晶度对热稳定性和熔点的影响。

Development of a Low Melting Point Alloy for Green Thermal Cutoff

环保型温度保险丝用易熔合金的研制

In the light of the characteristics, coefficient of thermal conductivity, density and melting point of the coal dust, this paper surveys the principle of producing the partical thermal insulator for molten steel using coal dust and its service effect in the ladle.

从粉煤灰性质、导热系数及密度、熔点等方面，分析探讨了利用粉煤灰加工钢水颗粒保温剂的原理，以及保温剂在宝钢的实际使用效果。

Study on Thermal Properties of Low Melting Point Glass of Na_2O-Al_2O_3-B_2O_3 System

Na2O-Al2O3-B2O3系统低熔点玻璃的热学性质研究

Effects of Additives on the Thermal Properties of Low Melting Point Lead Borosilicate Glasses

添加剂对铅硅酸盐低熔点玻璃热性能的影响

Thermal analysis results showed that there was no influence of POE and SiO2 on the glass transition temperature and melting point of PLA.

热分析研究结果发现，弹性体POE和无机纳米SiO2粒子对PLA的玻璃化转变温度和熔点的影响不大。