melting solid的例句大全

study on dissolution time of high melting solid particle in metallurgical melt

难熔固体粒子在冶金熔体中溶解时间的研究

Self-emulsifying solid wax was prepared by melting solid wax with special emulsifying agent.

采用专用乳化剂将熔化的固体石蜡制备成固体自乳化蜡，并对其乳液的耐温稳定性、耐机械稳定性和耐化学稳定性进行研究。

The addition of V filler metal reduced the brittleness of joints by increasing the amount of vanadium-based solid solution in the weld. But the melting point of V filler metal was so high that the fille metal was hard to melt completely.

采用V填充层，焊缝中大量的钒基固溶体减小了接头的脆性，但V填充层熔点高，较难完全熔化。

Mathematical Model for Melting Process of Solid Particles Immersed in Metal Bath

浸没在金属熔池中固体颗粒熔化过程的数学模型

The Gasifying and Melting Technique for the Municipal Solid Waste ( MSW) with the Dioxins Zero Emission

二恶英零排放生活垃圾气化熔融技术

results solid dispersion dissolutions of pvp and peg at 45 min were 9.7 and 7.5 times as much as material drug, respectively. characteristic melting peak of cryptotanshinone in dta curve of solid dispersion disappeared.

结果PVP及PEG固体分散体在45min的溶出度分别达到原料药的9.7倍和7.5倍，固体分散体的DTA曲线中隐丹参酮的特征熔融峰消失。

the effects of moving of solid pcm on melting heat transfer

固态相变材料的运动对熔化传热的影响

alloying of metals involves melting the main ingredients together so that on cooling, the metal alloy is generally a nonporous solid.

涉及金属合金熔化的主要成分在一起，使冷却，金属合金通常是无孔固体。

yet there is nothing remotely equal about america in 2016. all that is solid is melting into air.

然而，在2016年的美国，一切都在变。

plastics. solid phenolic resins. determination of melting range by the capillary tube method.

塑料.固态酚树脂.毛细管法测定熔化范围

design highlights for solid sulfur melting unit

固体硫磺熔融装置设计要点

It includes three steps-hot metal granulation, solid state decarbonization and electric furnace melting down.

本文提出一种铁水粒化-固态脱碳 - 电炉重熔制备工业纯铁的新工艺.

It can be applied in both liquid and solid having low melting point.

可用于低熔点固体和液体的热导率的测定.

The high temperature melting furnaces with coke bed, oxygen enriched blast and two row tuyeres for smelting reduction were developed in west countries. With these furnaces the solid municipal waste could be treated for recycling, re using and innocuous disposal.

先进国家利用熔融还原技术开发了高温焚烧炉，这种带有焦炭床、富氧和双排风口的高温炉，可以达到对固体废弃物进行无害化和资源化的处理。

With regard to the average melting velocity ( g/ min), the order is as follows: crushed ice solid ice artificial snow natural snow.

就融化速率而言，大小顺序为：碎冰实冰人工雪自然雪。

The thixoforming is suitable for the controlling semi-solid forming of and steel with high melting point.

由于触变成形工艺本身的特点,使其更适宜于钢铁等高熔点材料的 半固态 成形控制.

Solid-metal embrittlement by cadmium can occur at temperatures below the cadmium melting point.

低于镉的融解点温度时会出现故态金属的镉脆化.

The semi-Solid Forming technique of low melting point alloy has been used in commercial production.

低熔点合金 半固态 成形技术被专家称为21世纪新兴的金属制造关键技术.

Reported herein are eight solid complex compounds obtained by reactions of uranyl nitrate, uranyl chloride and thorium nitrate with macro-cyclic polyethers dibenzo-18-crown-6, benzo-15-crown-5 and 18-crown-6 in polar solvents. The complex compounds have been characterized by elemental analysis, melting points and infrared spectro-metric analysis.

本文报道了硝酸铀酰、氯化铀酰和硝酸钍与冠醚DB18CR6、B15CR5、18CR6通过溶剂反应制得的8个固体络合物，对这些络合物进行了熔点测定、元素成分测定和红外光谱分析。

fenofibrate solid dispersion tablets were prepared by solvent melting method using peg 4000 and sodium lauryl sulfate.

以PEG4000和十二烷基硫酸钠为载体,采用溶剂-熔融法制备了非诺贝特固体分散体,再与适当辅料混合压片制得非诺贝特固体分散片.