metal packing的例句大全

Study and application of large bore seal metal packing

大通径金属密封封隔器的研究与应用

On the foam metal packing, it is about 30-80 microns.

结果显示，在泡沫金属填料上，液膜厚度大约在30-80微米范围。

Aopai Company, situated in the Huoshan Industrial Base of Anhui Province, is the top enterprise manufacturing metal packing boxes that applies to wins or alcoholic drinks and lighters.

安徽鳌牌金属制品有限公司是华东地区规模最大的金属酒包装和烟具生产专业企业，地处安徽省霍山工业园区。

The column was packed with high efficiency triangle metal packing.

精馏柱采用φ22的玻璃柱，内装高效不锈钢三角丝填料，填料高度为1.05m，理论板数为30块。

Metal packing absorbing typed dehumidifier experimental system is set up and tested.

实验部分主要是根据实验研究目的，设计并搭建金属填料型吸收式除湿器的测试实验台。

Typical modes of Rupture of Thin Metal Circle Plates under Normal Impact of Different Conical-Nosed Missiles& Experiments; Packing containers pails of sheet for industrial

薄金属圆板在圆锥头弹体正冲击下的破裂模式GB/T15170-1994包装容器工业用薄钢板圆罐

weighting the above mixture and packing it by dry bean curd and then warping by metal foil paper;

将上述的混匀料称量用干豆腐包裹好，再用金属箔纸包裹好；

mold overflow of lip packing with metal shell

外露骨架式轴唇圈模具溢胶问题研究

researches on the hydrodynamics and mass transfer properties of the metal slant hole plate wave packing

金属斜孔板波纹填料流体力学与传质性能研究

Packing in sturdy wooden cases is essential. Cases must be nailed, battenedsecured by overall metal strapping.

必须用坚实的木箱包装,装箱必须用铁钉钉好, 用木版钉住,用一根铁皮钉牢.

Influence of Liquid Initial Distribution on Liquid Distribution in Metal Corrugated Sheet Packing

液体初始分布对金属波纹板填料液体分布的影响

Catalyst bundle of ion exchange resin was packed in a column as a reaction zone and Mo Ti metal plate gauze structured packing was packed in a column as the recovery zone.

反应区充填离子交换树脂催化剂捆束包，提馏段充填Mo Ti金属板波纹丝网填料。

Closed packing with metal container or plastic container inside, packing with wood plate boxes outside.

内用金属容器或硬质塑料容器密封包装,外用木板箱包装运送.

The main production and operation of metallurgy, nonferrous metal smelting, oil and chemical industry to use acid-resistant anti-corrosion materials and industrial packing.

主要生产经营冶金、有色冶炼、石油和化学工业使用的耐酸防腐材料及工业填料。

Experimental study on metal gauze corrugated packing with high specific area

高比表面积金属丝网波纹填料的实验研究

The results showed the voidage ratio of taper spiral packing,θ-ring packing and metal gauze corrugated packing was 0.823:0.947:0.855, and under the same liquid sprayed density, the pressure drop ratio of unit height of packing layer was 0.58:1.10: 0.62.

流体力学性能测试中，锥度螺旋填料、θ环和丝网波纹填料三种填料的空隙率之比为：0.823：0.947：0.855时，在相同喷淋密度下，单位高度填料层压降之比却为：0.58：1.10：0.62。

The Periodicity of Packing Form of Metal Atoms in the Metallic Crystal

金属晶体中原子堆积方式的周期性