metallurgical的例句大全

The technique has some peculiar advantages on the metallurgical joining of dissimilar metal materials, which are hard to be welded through traditional melt welding methods.

磁脉冲连接是基于磁脉冲成形技术发展起来的一种固态连接技术，可实现难以获得熔化焊接头的异种金属材料的冶金连接。

The specialty makes the Al2O3/ Cu composite material by internal oxidation of deeply aluminized pure copper matrix is more fine to be the diathermanous copper material of metallurgical equipment in the high temperature service condition than the ageing and solution alloy of aluminized deeply pure copper.

这种特性使得纯铜深层渗铝内氧化Al2O3/Cu复合材料在高温服役条件下比纯铜深层渗铝固溶时效合金更适合用作冶金设备用传热铜材料。

Time Series Forecasting Methods Based on Pattern Matching and Its Applications in Metallurgical Processes

基于模式匹配的时间序列预测方法及在冶金过程中的应用

The Effects of Metallurgical Factors on the Mechanical Properties of Tin Bronze

冶金因素对锡青铜机械性能的影响

This paper studied the effect on decompound of MoS_2 which is caused by the lanthanon that appended in iron based powder metallurgical material.

通过实验研究了添加到铁基粉末冶金摩擦材料中的稀土在材料中存在的位置和状态以及稀土对MoS2分解所产生的影响。

Composition distribution on the interface of thermally sprayed Ni-Al coating which is reactively sintered at median temperature under protective atmosphere has been studied by SEM. A transition zone of about 20 μ m in width with metallurgical binding at the interface has been found.

将Ni Al混合喷涂层在中温保护气氛下反应烧结，通过SEM观察界面附近各成分的分布情况，发现在界面附近有宽度大约为20μm的过渡区并呈冶金结合。

Because of soluble copper and floatable gangue minerals in the ore, Cu-S bulk flotation technological flowsheet is adopted and obtain good metallurgical performance.

针对该矿石含有水溶铜及大量易浮脉石，采用铜硫混合浮选工艺，获得了较好的选矿指标。

The result was compared to experimental results calculated with a comprehensive thermal analysis instrument ( DSC), and the metallurgical structure in test pieces cooling in constant-speed was examined.

采用反算法对相变热焓进行计算并与综合热分析仪（DSC）实验结果相对比，并且对恒速冷却试件与实际空冷试样进行金相组织观察对比。

Application of computer in the design of process on thermal cycle of steel in metallurgical enterprise

计算机在冶金厂热循环工艺设计中的应用

A thermal model study of the metallurgical characteristics of combined blowing process with oxygen and natural gas as bottom blowing gas

底吹氧气、天然气复吹转炉冶金特点的热模研究

Study on Relationship of Porosity& Pore Structure of Metallurgical Coke with Thermal Performance

冶金焦气孔率和气孔结构与热性能关系的研究

Determination of Metallurgical Properties at Thermal State of Hard Coke and Research of Influence Factor

焦炭热态性能的测试与影响因素研究

Characteristic of Thermal Test and Calculation of Boiler Burnt Metallurgical Gases

燃烧冶金煤气锅炉热力试验和计算的特点

Due to its weak reaction and metallurgical bonding between particles and matrix, the mechanical properties of the in situ synthesized PTMCs are improved obviously.

原位合成工艺制备的PTMCs避免了界面反应，界面清洁、结合强度高，可以明显提高PTMCs的力学性能。

Primary investigation of metallurgical reaction engineering in metal powder reduction process

金属粉末还原中的冶金反应工程学探讨

The second teaching Symposium on reaction engineering of metallurgical colleges and Universities

全国冶金院校第二届冶金反应工程学教学讨论会

The experiment results show that the connection zone may be divided into multicomponent eutectoid, tungsten carbide and narrow ferrite and the interface is found to be a metallurgical bond because of the element diffusion, metallurgy reaction and formation of the new compound phase during the cast-in process.

实验结果表明：结合层是由窄小的铁素体带和多元共析体+条块状WC组成，界面元素发生扩散及冶金反应并有新相产生，呈典型的冶金结合。

Desulfurization experiment of metallurgical dust has been done under conditions of different reaction atmosphere with temperature range of 50~ 650 ℃.

在50~650℃的温度区间内进行了冶金粉尘在不同反应气氛条件下的硫化穿透实验，结果表明，反应温度与反应气氛对冶金粉尘脱硫有较大的影响。

This paper introduces technical features of power equipment, reactive load, harmonics harmful to power network and its preventive measures and techniques in metallurgical enterprises. The paper also compares functions and actual benefits of different reactive compensation and wave filtering devices.

介绍了冶金企业用电设备的工艺特点，用电负荷无功、谐波对电网危害的防治措施和技术，以及主要无功补偿滤波装置的性能比较和实际效益。

Speed up the development of continuous casting technology in the intensive way and quicken the step towards the transformation of the growth way of metallurgical industry ── a reading report at the Sixth National Continuous Casting working conference

以集约方式加快发展连铸加速冶金工业增长方式的转变&在第六次全国连铸工作会议上的书面讲话