model element的例句大全

A 3& D finite element structural model for ship hull and it's main hold sections is established and the strength analysis is made for a 22 000 m3 LPG carrier.

对22000m～3液化气船进行了整船和舱段三维有限元强度计算分析，建立了整船和船体主舱段的三维有限元结构模型。

Another major element of SCA is that it also defines a standard model for defining dependencies between components.

SCA的另一个主要部分是它还定义了一个标准模型，用于定义组件之间的依赖项。

A Study on Three-dimensional Damage Constitutive Model Finite Element of the Stability of Underground Cavern Wall Rock

地下洞室群围岩稳定性的三维损伤本构模型有限元研究

Based on the model experiment and finite element analysis software ANSYS, this paper focuses on the deep submersible spherical endure pressure shell with an observation window of big bore, mechanics property of which is studied.

结合有限元分析软件ANSYS对大潜深、大开口观察窗壳体结构模型的静态力学性能进行了数值分析及试验研究。

Then the finite element method is introduced for the elastic slider-crank mechanism, i.e. how to make the dynamics model of an elastic beam element by using the finite element method.

同时针对弹性机构而言，介绍了有限单元法。主要说明如何对弹性梁单元进行有限元建模。

Multi-element Linear Regression Analysis of Parameters Involved in the Slip Vector Model Applied for Ground Movement Prediction in Mountainous Area

山区采动滑移向量模型中参数的多元线性回归分析

The model of slit type cracking test for finite element analysis is established by HYPERMESH, the composite function of welding heating source and induction heating source is defined by FORTRAN program.

在有限元分析过程中，以斜Y坡口冷裂纹拘束试验为分析对象，利用HYPERMESH建立了有限元分析模型，采用FORTRAN语言编程实现了电弧热源和感应加热热源的复合作用。

Model of slope's dynamic response to blasting is given. The relationship between blasting seismic coefficient and slope stability coefficient is established based on kinematics element analysis.

建立了滑坡体爆破动力响应分析模型，基于运动单元法得出了爆破地震系数Ad与边坡安全系数Kd的关系；

The whole model was developed for analysis of the resultant detent force due to the slot effect and end effect, and the resultant detent forces were computed by finite element method and compared in various permanent magnet widths.

并建立整体磁阻力的有限元分析模型，探讨了永磁体宽度对整体磁阻力的影响。

Semicontinuous Model Used in Finite Element Analysis of Stiffened Structures

用于加筋结构的半连续有限元模型

Finite element numerical solution of fatigue life of mechanical member and of stress intensity factor K and J-integral for 3D model is approached with ANSYS software. An important method is made for the fatigue analysis and fatigue performance of winder axle.

本研究探讨了利用ANSYS软件分析机械构件疲劳寿命和三维模型断裂参量K和J积分的方法，为提升机主轴的疲劳分析和断裂性能研究提供了一种重要手段。

The powerful functions of ANSYS ensure to build a large and complicated 3D model successfully, realize the automatical partition of finite element model, guarantee the precision of calculation and read results conveniently.

ANSYS强大的功能可以建立大型而复杂的三维模型和快捷地实现有限元网格的自动划分、能够确保计算的准确性以及方便地读取分析结果。

A three layer cylinder model containing alloy, steel lining and housing was established. With the help of finite element method ( FEM) software package ANSYS, and considering the stress change along alloy thickness, the bearing stress especially in alloy layer was calculated.

建立了合金层、钢背和轴承座的三层圆筒模型，利用ANSYS软件对轴瓦应力，尤其是合金层应力进行了计算，计算过程中考虑应力沿合金层厚度方向的变化。

Finite Element Mode Analysis Model of Diamond Circular Saw Blade with Noise and Vibration Reducing Structure

降噪减振结构金刚石圆锯片的有限元模态分析模型

Discusses the application of three-dimensional finite element model for the calculation of ship torsional strength hosed on an example of22000dwt container ship.

本文以22000吨集装箱船为实例，研究应用空间有限元模型计算船舶扭转强度的方法。

The finite element model is established according to the actual size of the brake disc. The material relevant parameters are determined.

根据制动盘的设计尺寸建立其有限元模型，确定材料的相关参数，确定热载荷和边界条件。

By using the finite element software ANSYS, the ultimate load of actual size model less than the load which is calculated using the similarity theory, error about 15%.

运用有限元软件ANSYS求得的实际尺寸模型极限荷载小于使用相似理论推算的模型极限荷载，误差约为15%。

Research on the Application of Finite Element Model Updating Technique in Bridge Engineering

有限元模型修正技术在桥梁工程中的应用研究

Using solid element method, three dimensions model of finite element of whole box beam is set up. The mechanical properties of end section is compared and analyzed.

按实体块单元的有限元计算理论，建立全梁整体分析的三维空间有限元模型，从计算结果中提取出端块部分的受力情况进行比较和分析。

Any class can therefore act as the entry point into the model portion of the application as long as its name is the same as the class attribute value of the Resource element.

因此，任何类都可以充当进入应用程序的模型部分的入口点，只要它的名称与Resource元素的class属性值相同。