model fluid的例句大全

constitutive model equation of upper-convected maxwell fluid in cylinder coordinate

柱坐标系下上随体Maxwell流体模型

A dynamic model of extraction egg yolk oil by supercritical fluid

超临界流体萃取分离蛋黄油的动力学模型

The Two-Fluid Model of The Velocity Fields of the Circumstellar Envelop of Mira Variables

Mira变星拱星包层速度流场的二流模型

By using the two-fluid model and the k-ε-Ap turbulence model, silt-laden flows through a hydraulic turbine runner has been calculated.

本文利用k－ε－A p两组湍流模型计算水轮机转轮中泥沙固液两相湍流。

The mean temperature difference of CROSS-FIOW heat exchangers with one fluid mixed and the other unmixed together with an improved mathematical model better describing the heat transfer process in the exchanger

垂直环管内紊流同向混合对流放热过程试验研究一侧流体混合，一侧流体不混合的叉流换热器的平均温差和改进的数学模型

In view of the line and surface tactility displayed by the pneumatic nozzle array, a fluid-structure coupled finite element model of the finger skin and nozzle was established.

针对气动喷嘴阵列喷气再现线面触觉问题，建立手指皮肤和喷嘴的流固耦合有限元模型。

The developed model can be used to investigate the fluid flow, heat transfer, species transport and electrochemical reactions in the DMFC.

模型考虑了流体流动、热量传递、电荷传递等过程。

The mathematical model simultaneously accounts for the fluid flow, heat transfer, multicomponent transport, electrochemical kinetics and voltage-current relations.

模型综合考虑了电池内的流体流动、传热、多组分传递、电化学反应及电压-电流关系等。

Then, a three-dimensional, comprehensive, steady-state mathematical model is described to investigate the fluid flow, heat transfer, species transport and electrochemical reaction in the PEM fuel cells.

然后，发展了一个用于研究质子交换膜燃料电池特性的三维综合的数学模型，模型同时考虑了流体流动、热量传递、电荷传递、多组分传递和电化学动力学。

A new cubic equation of state for refrigerants is presented in this paper by means of a "hard-sphere fluid" model.

在组分分析的基础上，采用立方型状态方程建立了计算原油体积系数的新方法。

Firstly, using the theory of gas-liquid two-phase flow, deduced the thickness of lubrication film in the leakage gap which make from packing assembly and piston rod, and determined leakage model of the fluid in the leakage gap according to the thickness of lubrication oil film.

首先利用气液双相流动理论，推导出了由填料组件与活塞杆所组成的泄漏通道中润滑油膜厚度，并根据润滑油膜厚度确定泄漏通道中流体的泄漏模型。

Great the entrance of amniotic fluid model.

制作大鼠羊水人血模型。

Because of considering fracturing fluid flow in the vertical direction, the model is more reasonable for fracture height prediction.

由于考虑了压裂液缝高方向流动，建立的模型对缝高预测更符合实际，对于指导压裂设计特别是控制缝高压裂有一定的实用意义。

A three-dimensional CFD model using the volume of fluid ( VOF) method was presented for predicting the steady two-phase flow and heat transfer process.

利用流体体积法建立了蜂窝型加湿器的流体动力学模型（C FD），反映了稳态的三维气液两相流动的传热传质过程。

Conclusions Sodium hyaluronate, glucosamine sulfate and celecoxib could significantly decrease the levels of IL-1 β and TNF α in synovial fluid of OA model.

结论四种药物中透明质酸钠、硫酸氨基葡萄糖和塞来昔布均能够抑制OA模型关节滑液中IL-1β、TNFα的水平，其中透明质酸钠更加显著。

considering gas-condensate reservoir fluid phase change at different well-bore temperature and pressure, the horizontal well-bore, vertical well-bore as well as the gas flow of mouth have been researched and the pressure drop calculation model are set up.

考虑了不同井筒温度、压力下的凝析气藏流体相态变化，分别对凝析气藏水平井井筒弯曲段、垂直段以及气嘴的流动进行研究并建立了相应的压降计算模型。

A three dimensional model for fluid flow and heat transfer in sodium pool of a fast breeder reactor ( FBR) is built on mass, momentum and energy conservation laws.

针对快中子增殖反应堆钠池的流动传热特点，以质量、动量、能量守恒定律为基础，建立有关快堆钠池流动传热的三维数学模型。

For free-surface flow model, fluid flow over fixed undulated profile;

另外一种为自由表面流动，不可压缩流体在固定波形板上流动。

The results will make the establishment of coupled fluid-solid model more reasonable.

研究结果有助于合理地建立隧道开挖问题的流固耦合模型。

At the same time, using the fluid model approach, we present a simple proof of the sufficient condition given by Weiss [ 9].

同时，我们又用流体模型方法得到了系统稳定的充分条件，大大地简化了Weiss[9]的证明。