mold temperature的例句大全

Computational Simulation on Temperature Field of Slab Continuous Casting Mold

板坯连铸结晶器温度场的计算机仿真

the results indicate that gas holes in metal shell can be eliminated by the increase of the preheating temperature of cast mold.

结果表明：提高铸型预热温度可以完全消除无气孔金属壳；

Influence of the Average Temperature Boundary Condition on Mold Cavity Surface to Injection Molding Simulation

模腔表面平均温度边界对注塑仿真的影响

The enthalpy-change coating consists of some matters as a base material causing endothermic reaction at a certain temperature range, which acts as iron chill when placed on a mold or core surface.

焓变涂料是以在一定的温度区间内可发生吸热化学反应的物质为基料配制的，将其涂在砂型（芯）表面，可代替常规冷铁。

Research upon mold copper plate temperature field in slab continuous casting at high withdrawal speed

高拉速条件下板坯连铸结晶器铜板温度场研究

Considering the international developing trend of casting industry and the domestic market demand of mold casting pattern materials ( mold casting waxes), this paper researched low, middle and high temperature series mold casting pattern materials, developed small and middle scale technology to produce them.

应对国内外熔模精密铸造业的发展趋势和国内对熔模铸造模料（熔模铸造蜡）的市场需求，本文研究开发了低、中、高温系列精密铸造模料及其生产工艺。

With the increase of vacuum rate and permeability, the thermal degraded products of EPS remove from the mold cavity more quickly and stay in high temperature area shorter, so gas evolution decreases.

随着负压度和涂层透气性的增加，EPS热解产物能够更快地排出型腔，在高温区停留的时间减少，EPS发气量降低。

With an aim of providing a data base for CAD system for castings, the conclusions are as follows: 'pouring Method' for measuring thermal properties of molds and 'Interface Temperature Method' for measuring metal-mold interface heat transfer coefficients are major thrusts in future.

从为铸造工艺CAD提供数据库的根本目的出发，指出：浇注法测试铸型热物性值和界面温差法测试金属&铸型界面换热系数是今后的主要发展方向。

the rhcm mold should realize rapid heating and cooling to the scheduled temperature in the injection molding cycle.

RHCM技术的关键是在注塑周期中，能够使模具快速加热和冷却到预定的工艺温度。

research on temperature distribution rule of glass mold during surfacing

玻璃模具喷焊时温度分布规律研究

study on meniscus temperature fluctuation during mold oscillation in continuous casting by modeling experiments

连铸结晶器振动下弯月面温度波动模拟实验研究

The mineralogical constitution of mold fluxes was investigated at the different temperature by TEM and XRD.

采用矿相显微镜及XRD研究了不同温度条件下连铸保护渣矿相结构的变化.

Also the machine mold is up to the required temperature and is usually controlled by thermostat.

铸焊模具应达到所要求的温度而通常用恒温器控制.

The structure of a temperature control box plastic injection mold and its demoulding way is introduced.

介绍了温控盒塑料件注射模的结构及脱模方法.

Cavity is an important part of the continuous extrusion machine, it has contact with extrusion wheel, billet and mold, temperature distribution is under complex conditions which directly affects the production efficiency and the quality of the products.

连续挤压机腔体是连续挤压机的重要组成部分，它与挤压轮、坯料、模具均有接触，工况条件下温度分布变化复杂，直接影响连续挤压生产的效率和产品质量。

The temperature distribution along the graphite mold during SPS was systematically studied.

系统研究了温度梯度场SPS烧结时的模具内部温度场分布规律.

Omputer simulation of the temperature field of the mold, which is used for producing the low cost solar cell silicon sheet with the Electromagnetic Levitation-melt Centrifugal Casting ( ELCC) technology, is carried out with the finit element method.

运用有限元法对太阳电池硅片电磁悬浮熔炼离心铸造（ELCC）技术中成形模具的稳态温度场进行了计算机模拟。

Blowing argon gas had much effects on the mold flow field and temperature field.

向结晶器中吹入氩气后，对钢液的流场和温度场有较大的影响。

Predict temperature for all surfaces within the mold: part , runners , cooling channels, inserts.

指出所有模具表面的温度: 产品, 流道, 冷却液,镶件.

Copper-Molding Machine Melting Furnace Temperature Controlling System Based on DSP

基于DSP的铜材成型机熔炉温控系统设计