mould core的例句大全

The test results and simulation results have good consistency. ( 6) The MEDM was used to produce microstructure of spherical microlens array on reflector surface of mould core.

试验结果和仿真结果具有很好的一致性。（6）采用超细电火花技术在反射罩模具型芯表面制作了球冠型微透镜阵列的微结构。

Design and CNC Processing of Remote Controller Back-shell Mould Core

遥控器后壳模具型芯的设计和数控加工

A method of automatic generation of feature-based injection mould core & cavity is put forward.

提出基于特征的注射模具型 芯 型腔自动创建的实现方法.

the utility model is mainly applied as the mould core in alloy big ingot casting.

本实用新型主要用作合金大锭浇铸时的模芯。

Analysis and Calculation of Offset in Rectangle-section of Injection Mould Core

注射模具中矩形截面型芯偏移的分析计算

Machining of the Interrupted Screw Thread on the Mould Core Process and Thread

模具型芯上断续螺纹的加工

The spinning forming is to clamp blanks onto mould core, using spinning press to have mould core spin as high speed together with blanks.

旋压成形是将毛坯夹紧在模芯上，由旋压机带动模芯和毛坯一起以高速旋转。

Investigation on NC Machining Method of Spiral Slots in Mould Core for Blowing Thin Plastic Film

薄膜吹塑模芯螺旋槽的数控加工

Technology for Processing the Vulcanizing Mould Core

铝合金芯模铸造工艺的改进

Design of New Type of Die Casting Mould with Tightwire and Idler Wheel for Angle Core Pulling The Air Pressure Seal Equipment of the Bearings in the Idler Pulley Assembly of the WEDM

新型钢丝绳滚轮斜抽芯压铸模设计线切割机上下导轮轴承气压密封装置

Adjustable Bore Mould for Pole Core Core Drilling in the Ice Sheet of the South Pole

可调整磁极铁心钻孔模南极冰盖深层取心钻进技术及设备

Design of Molding Mould Used in the Convolute Manufacture Technology of Motor Iron Core

电机铁芯卷绕制造技术中的成型模设计

Structure design of contractile interior core-pulling injection mould for outer casing of flow-meter

流量计外壳收缩内抽芯注射模具结构设计

The contractile interior core pulling mould structure was designed for the molding of the concave part of inner side of outer casing of flow meter.

注塑制品模内收缩的可视化实验研究为成型流量计外壳内侧凹进部分，设计了收缩内抽芯模具结构。

The mould design sub-system consists of eight modules including formed part module, mould base module, feeding system module, core-pulling mechanism module, cooling system module, venting system module, standard part database module and pre-reset mechanism module.

模具设计子系统包括成型零件设计、模架设计、浇注系统设计、抽芯机构设计、冷却系统设计、排气系统设计、标准件库及先复位机构设计八个模块。

Determining force of loose core of plastic ejecting mould with knocking method

用敲击法测定塑料注射模抽芯力

The technological characteristics of the spare parts of three-way straight plastics pipe are analyzed, putting stress on the characteristics of the products by gating injection mould with side core pulling mechanism.

分析了三通直管塑件的工艺特点，主要分析了浇口注射模成型并且带侧向抽芯机构制品的工艺特点；

by decreasing the grade of cast iron, using furan resin selfsetting sand as a substitute for clay sand to make the core and prolonging cooling time in mould, the cracking problem has been solved.

通过降低材料牌号，使用呋喃树脂自硬砂取代粘土制芯，延长铸件在型内冷却时间，使裂纹缺陷问题得到解决。

The bench fitter's first job is to produce a cavity and core free of machine marks and to the shape and dimensions specified on the mould detail drawing.

装配钳工的首要工作是去除凸凹模的机加工痕迹，获得模具零件图上标注的形状及尺寸。

Processing of the Copper Electrode on the CNC Carving Machine for the Core of the Injection Mould for Mobile Phone Shells

在电脑雕刻机上加工手机外壳注射模型芯铜电极