nozzle的例句大全

Technical Report of 625 EDM Machine Specially for Machining of Fuel Spray Nozzle Holes

625喷油嘴喷孔电火花加工专用机技术报告

Design and Testing of Constant Acceleration Spray Nozzle

等加速喷嘴的设计与试制

This paper generally designs a kind of constant acceleration spray nozzle, gives a method of building constant acceleration curve of equation.

设计了一种等加速喷嘴，给出了建立等加速曲线方程的方法。

Experimental study on the swirling characteristics of a swirling water jet nozzle by using PIV Producing films of uniform thickness of paints and varnishes on test panel ( using spinner)

旋转射流喷嘴内旋流特性的PIV实验分析GB/T6741-1986均匀漆膜制备法（旋转涂漆器法）

The hot fire and cold flow experiments of two kinds of test plug nozzle engines were done to know more about the influence of plug nozzle performance by changing the angle of the primary nozzle.

为分析主喷管角度对塞式喷管性能的影响，对两种塞式喷管实验发动机进行了热试和冷流试验。

By using simulation test on the flow testing bench, the error in flow measurement with standard throttle nozzle for dusty stack gases is analysed.

用流量试验台做模拟试验，分析了用标准节流喷嘴测量含尘烟气流量的误差。

A testing bench is designed for testing the thermal fatigue properties for prechamber nozzle in combustion gas for selection of materials and investigation of the failure mechanism of prechamber nozzle for high speed diesel engine.

为高速柴油机预燃室喷咀的选材及研究断裂机理，设计了燃气热疲劳实验台，并进行了八种合金的燃气热疲劳实验。

The different texturing effect of the filaments depends on the different design of the nozzle. The spinning machine is a key kind of equipment in chemical fiber silk manufacturing.

当它对化纤长丝发生机械作用时，不同结构的喷嘴可获得不同丝圈效果的变形丝。纺丝机是生产化纤长丝的关键设备。

Theoretical specific impulse for two-phase flow in nozzle of rocket-ramjet engine& a simple estimation method

火箭冲压发动机喷管的两相流动理论比冲&一种简单估算方法

The theoretical specific impulse formula for two-phase flow in nozzle of rocket-ramjet engine is derived on the basis of similarity to that used for rocket engine.

本文导出了类似于火箭发动机的火箭冲压发动机喷管的两相流动理论比冲公式；

Review of Collapse Limit Load of Nozzle/ Tee Connection Containing Defects

含缺陷接管/三通结构塑性极限载荷研究进展

Effects of teeming temperature on nozzle blockage are discussed briefly.

对浇注温度对水口结瘤的影响作了很多炉的观测，确定了它的作用。

A Study on the Nozzle Flow Characteristic and the Temperature Drop Calculation Method

气嘴流动特性及温降计算方法

The method used to calculate the temperature drop in nozzle is proposed.

给出了气嘴节流温度计算方法，并分析了节流后温降的原因。

A calculation about a temperature field of boundary movement nozzle with finite element methode

用有限元法计算边界移动的喷管温度场

Parameter variations studied include nozzle diameter, nozzle number, duct radius, jet and mainstream volume flow, temperature ratio and dynamic pressure ratio.

可变的参数包括：喷嘴直径，喷嘴数，圆柱管半径，射流与主流的体积流量比、温度比和动压比。

The transient heat transfer process of the submerged nozzle under two different preheating regimes is studied by CFD of ANSYS and thereupon the temperature field distribution of the nozzle after preheating and its temperature rise curve have been obtained.

运用ANSYS的CFD对浸入式水口两种预热烘烤方式下的瞬态传热过程进行了研究，得到了水口烘烤预热后的温度场分布和水口的升温曲线。

Sprinkle nozzle is the terminal component of the system.

洒水喷头是自动喷水灭火系统的终端灭火组件。

Selection of Nozzle in Performance Test for Industrial Fan

工业通风机性能测试中喷嘴的选择

Development of Performance Test Unit for Fan with Outlet Single Nozzle Wind Chamber

出口单喷嘴风室型风机性能试验装置的研制