optimal temperature的例句大全

The optimal temperature range was determined by means of studying the polishing effect under various temperatures.

通过改变温度考察其对不锈钢抛光效果的影响，从而确定最佳温度范围；

The solid heat conduction along the flow direction and the regenerator heat storage capacity for the unit volume has no impact on temperature efficiency peak and optimal switch time.

沿气流流动方向固体导热和单位质量固体蓄热能力不影响温度效率峰值和最佳切换周期。

An Optimal Control Method for Three-dimensional Temperature Distribution in Pulverized-coal Fired Furnaces

一种煤粉炉内三维燃烧温度分布优化控制方法

The average waste heat generating efficiency and the average temperature efficiency are both infected by the exchange time and the optimal exchange time is about 60s.

换向周期对平均余热利用效率和平均温度效率都有较大的影响，其最佳换向周期应定在60s左右。

Coil coatings was thermal analyzed and researched with DSC in order to test glass transition temperature ( Tg) of the paint film at the maximum precoated metal temperature ( PMT) and determine the optimal curing conditions of different coil coatings.

采用DSC进行卷材涂料热分析研究，测试在不同PMT（最高金属板温）下漆膜的Tg，以确定各种卷材涂料的最佳固化条件。

Maximal temperature efficiency is directly proportional to the passage length and optimal switch time is directly proportional to the matrix thickness.

最大温度效率与通道长度成正比，最佳切换周期与间壁厚度成正比。

The content of terminal carboxyl group can be controlled under the optimal conditions as followed: catalyst concentration 120 μ g/ g, esterification temperature 240 ℃, stirrer rotary speed of final condensation reactor 5 r/ min.

控制PBT端羧基含量的最佳工艺为：催化剂浓度120μg／g，酯化温度240℃，终缩聚釜搅拌器转速5r／min。

The results show that the aging time, the calcination temperature and the calcination time of the system all impact the particle size and the crystallinity degree, and we get the optimal condition by comparing.

研究发现陈化时间、煅烧温度和煅烧时间都对制得的颗粒的大小和结晶度产生影响，通过对比找到最优制备条件。

The influence of such factors as power, time of microwave irradiation, the decomposing temperature and time was discussed in detail. The optimal experiment condition was determined by those orthogonal experiments.

实验中选择微波辐射功率、微波辐射时间、热分解温度和时间为因素，通过L（16）（4~4）四因素四水平的正交实验，确定了最佳合成条件，并研究各因素对产物的影响。

A novel three-point all optic fiber compensation network is put forward, and an optimal network is designed for adapting the nodes influenced by environmental temperature and vibration etc.

提出了一种新颖的三节点式全光纤传感补偿网络，设计了当节点支参数受环境温度、振动等影响时的最优化网络结构。

There exists the maximal temperature efficiency and the corresponding optimal switch time.

存在最大温度效率和相应的最佳切换周期。

After three heating forms of theoretical cycle were compared, in accordance with the working specialities of internal combustion engines, it was confirmed that performance of the constant pressure heating cycle is optimal within temperature and pressure restraints.

基于内燃机的工作特点，比较理论循环的三种加热方式，证明了温压约束下等压加热循环性能最优。

With optimal design and processing. a 10-bit precision is achieved without laser trimming and good temperature tracking property is obtained in full temperature range (-55~ 125 ℃).

在设计和制作上进行优化，不用激光修调能够达到10位精度，在全温范围内有较高的温度跟踪特性。

Using temperature tester and associated software the solar cell firing process is optimized. An optimal firing process is obtained by adjusting the peak temperature and the convention efficiency of solar cell is also improved.

利用炉温测试仪和相关软件优化太阳电池烧结工艺，通过调整烧结峰值温度，优化烧结工艺，提高了太阳电池转换效率。

The maximum temperature efficiency and the optimal switch time are proved.

薄壁蓄热体传热存在最大温度效率和最佳切换周期。

Then based on the current basin temperature from the practical survey, the mathematical model about the identification problem is established, and the identifiability and the existence of the optimal solution of the identification problem are proved;

根据现今实测温度，建立了问题的参数识别模型；证明了可识别性、最优解的存在性；

A new method for synthesizing benzonitrile using benzoic acid and urea as raw materials. The effect of the molar ratio of the reactants, the reaction temperature and time on the yield of benzonitrile has been investigated. Through the study, the optimal technological conditions were obtained.

研究了以苯甲酸和尿素为原料合成苯甲腈的新方法，对反应物的摩尔比，反应温度和时间对产率的影响作了探讨，找到了最佳工艺条件。

The optimal operating condition of series-wound thermosyphons is the evaporative length of 120 mm, inclination angle of 30 °~ 40 °, hot water temperature of 60 ℃, flow rate of 0.3m~ 3/ h, and series-wound type of D.

串联热管在倾角为30°~40°、热水温度为60℃、热水流量为0.3m3/h、蒸发段长度为120mm、D型串联的条件下运行最佳。

Numerical examples were given to show the effects of the temperature ratio of the two reservoirs, the total heat exchanger inventory and the temperature ratio between heat sink and surroundings on the optimal performance of the refrigerator.

采用数值计算分析了热源温比、换热器总热导以及高温热源温度和环境温度之比对该制冷机生态学最优性能的影响。

The effects of quenching temperature, cooling pattern, temper temperature and temper times on the structure and properties of high carbon and vanadium high speed steel ( HSS) roll were researched and the optimal heat treatment technical parameters were determined.

研究了淬火温度、冷却方式、回火温度和回火次数对高碳高钒高速钢轧辊组织和性能的影响，确定了最佳热处理工艺参数。