plastic compression的例句大全

An analysis of the three-dimensional flow of metal under plastic compression

金属塑性压缩过程三维流动的分析

Long range and short range frictional slip-lines on plane contact surface in plastic compression ( the rule of isoclinic gradient)

塑压接触平面上之长程滑动与短程滑动（等倾陡线规律）

Analysis of dynamic buckling of bars under plastic compression wave with finite element eigenvalue

应力波作用下直杆塑性分叉动力失稳分析

Experimental investigation on the plastic stability of a cylindrical shell under axial compression

圆柱壳受轴向压缩塑性稳定性的实验研究

In this paper, the buckling strength of the web of whole corrugated web H beam under the uniform compression loading is analyzed by the energy principle. And the critical load formulae of the plastic buckling of corrugated web is given.

依据能量原理分析计算了承受均布压力的全波纹腹板H型钢梁的腹板的屈曲强度，给出波纹腹板塑性失稳的临界力公式。

Conclusion the straw fibre reinforced plastic foam because straw fibre to join, make hole wall of compressive performance enhancement, thereby improving the straw fibre polyurethane foam plastics compression strength.

分析得出秸秆纤维增强的泡沫塑料由于秸秆纤维的加入使孔壁的抗压性能增强，从而提高了秸秆纤维聚氨酯泡沫塑料的压缩强度。

After deboned, the faceplates occurred the permanent bending deformation and elastic buckling in the vertical main direction of compression load, and the foam core happened the shear failure and permanent plastic deformation.

上下面板和泡沫夹芯脱胶分离后，面板主要垂直于压缩载荷的方向发生弹性屈曲和永久的弯曲变形，泡沫夹芯在冲击损伤的附近发生剪切失效和永久的塑性变形。

Numerical simulation also confirm this analysis that the fluid elastic-plastic model can approximately describe the shock compression and release process of single crystal LiF in the teens GPa range, but for precise description, especially in the initial release stage, more detail constitutive model is needed.

数值计算表明：在十几个GPa的压力范围，单晶LiF的冲击加载-卸载过程近似满足弹塑性模型，但在精确描述仍需要更准确的本构方程和物理模型。

the buckling in static and dynamic compression tests is in inelastic region, it is plastic buckling.

静态以及动态下之挫曲皆已进入非弹性范围，属于塑性挫曲。

nastran's finite element analysis software to carry out the structure strength analysis of the compression spring of brake shoe and finds out the plastic deformation reason.

Nastran有限元分析软件对制动蹄压簧进行结构强度分析，确定其在装配状态下产生塑性变形的原因。

industry: contact pad; compression spring; electrical tape; tray; plastic packaging products; power meter;

所属行业：触片；压缩弹簧；电工胶带；托盘；塑料包装制品；电能仪表；；

The mechanical handling of the compression or injection molding of rigid plastic products of Burr.

本机械处理压缩或射出成型之热硬性塑胶制品的毛边.

Baby carriage, etc. of plastic mold, compression casting mold, gauges and fixture etc.

童车; 水族等)塑胶模具 、 压铸模具 、 检具、工装治具的设计与制造的专业性企业.

Elastic plastic Buckling Analysis on Thin wall Cylindrical Shells Fully Filled with Liquid under Axil Compression

充满液体的薄壁圆柱壳在轴压作用下的弹塑性屈曲分析

It is shown in the static and dynamic compression stress-strain results, the curve has a typical three stages form. There are elastic stage, plastic stage, and close-grained stage after crushing.

从其静-动态压缩应力-应变曲线中可以看出，曲线是典型的三阶段形式，即弹性阶段，塑性阶段，及压溃后的密实阶段。

It is used widely in making injection and compression molds for rubber and plastic molding, molds for die-casting metals, and dies for forging and metal stamping.

它被广泛应用于制造用于橡胶和塑料成型的注射压缩模具、压铸轴承合金模型以及锻造和五金冲压的印模。

The flow stress features of 2519 aluminum alloy during plastic deformation at elevated temperature were studied by the isothermal compression test using Gleeble-1500 hot simulator.

采用Gleeble-1500热模拟机进行高温等温压缩试验，研究了2519铝合金在高温塑性变形时的流变应力特征。

plastic molds: compression molds, extrusion and injection molds, etc.

塑料模具: 压塑模具 、 挤塑与注塑模具等.

The influences of different tension and compression modulus ratios, Poisson's ratios and dilation angles on the expansion pressure and radius of plastic zones are discussed.

探讨了不同拉压模量之比、拉压泊松比和剪胀角对球形孔扩张的扩张压力及塑性区半径的影响。

Elasto-Plastic Buckling Analysis tor Thin-Wall Stiffened Semirigid Shell Structures under Axial Compression

薄壁杆件的动力稳定性导弹薄壁加筋半硬壳结构弹塑性屈曲分析