plastic process的例句大全

waste plastic was added into the iron scale column in hoganas process. heat emission qualification of agro-stalks during smoldering

将废塑料内配于Hoganas铁鳞还原的料柱内，高温下塑料裂解释放热量.秸秆阴燃过程热量释放定量分析

The Process of Using HSM in Plastic Bottle Manufacturing

塑料瓶吹塑模具的高速铣削加工工艺

Development of Packing Material for Infusion and Process Design of Plastic Bottle and Soft Bag Workshop

输液包材的发展及塑料瓶软袋车间的工艺设计

In the drawing process, the sheet has the plastic deformation, the material is shifted and distributed, because of the complexity of the inside stress and strain, it is difficult to control the condition preciously in the drawing process.

拉深过程中，板料产生塑性变形，材料被转移和重新分布，内部的应力和应变十分复杂，导致拉深过程中的状态难以精确控制。

Continuous forming and extruding process equipment for high intension plastic corrugation pipe

高强度塑料波纹管连续成型产出工艺及装备

In this paper, the three-dimensional heating-elastic-plastic finite element method is used to simulate the welding process of the low-side open wagon sidewall.

本文基于三维热弹塑性有限元法对侧墙进行了热弹塑性分析。

On the shearing wire process, the maximum stress point is not the joint between capillary and gold wire, and it is on the foreside of contact point which is the failure point of plastic distortion.

在劈刀剪切断丝过程中，金丝的最大受力点并不是劈刀与金线的接触点，而是位于接触点的前部，即塑性变形的失效点。

The preparation process, application and performance test of low-temperature cured quick dry melamine-based plastic paint are described.

介绍了低温快干氨基塑料漆的制备、施工和性能的测试。

Die design and process of extrusion blow molding for plastic fuel tank

塑料油箱挤出吹塑成型工艺与模具设计

The strength reduction FEM, taking the run-through of plastic zone as unstability criterion, can obtain actual stress distribution and simulate the process of slope failure.

以塑性区贯通为失稳判据的强度折减有限元法，可以很好的求解真实的应力分布和模拟软土边坡破坏过程，是一种值得提倡的方法。

Research of Foam Bulk Density in Freely Expanding Process of Extruding Plastic Foam

塑料自由膨胀挤出发泡过程泡体密度研究

3D elasto-plastic FEM simulation of precise extrusion process of the box-shaped work piece

方盒形件精密挤压成形三维弹塑性有限元模拟

Take the plastic mold design process as the example, plastic material performance database and structure feature data are integrated into the PDM system. Mold design technology such as the CBR, model parameter driven parts library, uniform assembly model, are controlled by the PDM environment.

以注塑模具设计为例，讨论了塑料材料性能数据库集成、塑件结构工艺性数据集成、基于CBR的模具设计推理方法集成、模型参数驱动的零部件设计集成以及基于统一装配模型的模架设计集成。

The rheological and extrusion contrast tests on PVC resins were made by using RM-200 intelligent torque rheometer and used plastic extruder used in small experiments, and the properties of processing products and processing process conditions were analyzed.

采用RM-200智能转矩流变仪和小型实验用塑料挤出机进行PVC树脂流变及挤出对比试验，并分析了制品的性能及加工工艺条件。

Axial pressing effect in the injecting preplasticizing process under vibrating condition is investigated. By using ( electromagnetic) dynamic plastic extruder, a blend of HDPE/ CaCO_3 is processed under steady and dynamic condition.

采用电磁动态注塑机在不同工况下将HDPE/CaCO3共混物分别进行稳态和动态加工实验，研究振动力场作用下注射预塑过程中轴向挤压的作用。

Clocking other women's shoes, height, cellulite, where their handbag is from and whether or not they have had plastic surgery is the usual thought process, the study found.

研究发现，暗暗记下别的女人穿的鞋、她们的身高胖瘦，她们包在哪买的以及她们是不是整过容，是女人们通常的思维过程。

The technological process of coating on plastic lens is explicated.

较详细地探讨了塑料镀膜的工艺过程；

Numerical simulation also confirm this analysis that the fluid elastic-plastic model can approximately describe the shock compression and release process of single crystal LiF in the teens GPa range, but for precise description, especially in the initial release stage, more detail constitutive model is needed.

数值计算表明：在十几个GPa的压力范围，单晶LiF的冲击加载-卸载过程近似满足弹塑性模型，但在精确描述仍需要更准确的本构方程和物理模型。

This topic through the analysis of the plastic arts fish grain origin and evolution process, explore fish grain of the plastic arts national connotation.

本课题通过分析鱼纹造型艺术的起源及演变过程，探索鱼纹造型艺术的民族内涵。

A valuable information that can be used to study mechanism of soil failure and improved further tractive performance of tracked vehicles is obtained from the process of plastic failure of the soil under the action of track link and the σ max~σ min figures.

计算得到的履带作用下的土体的塑性破坏过程和σ（max）～σ（min）图为研究土壤破坏机理和进一步改善履带车辆的牵引性能提供了参考资料。