plate current的例句大全

Third, the small plate current is too-around small, does not favor the great fund the turnover.

三是中小板流通盘太小, 不利于大资金的进出.

Financial plate current or 2.1 percent, down from the intraday high.

金融板块当前涨幅为2.1%, 已从盘中高点回落.

this occurs because the plate current in a class ab amplifier is not continuous for the entire ac cycle.

这是因为该板块目前在AB类放大器是不连续的整个交流周期。

plate current only flows when a signal is present, and only flows for exactly half, or 180 degrees, of the input cycle.

板目前流动时，只存在一个信号，只有流动的一半，或180度，输入周期。

This paper studies the electromagnetic field and temperature field around a crack tip in a infinite conductive thin plate at the time of setting up electric current.

研究了在向含裂纹的无限大导电薄板中通入电流的瞬时，裂纹尖端附近的电磁场和温度场。

By means of resistance and capacitance coupled negative feedback method to control the plasma discharge development process and prevent the transition from glow discharge to spark discharge in a pin-to-plate static air plasma generator, a stable alternative current atmospheric glow discharge is produced successfully.

在静态大气压空气针-板等离子体发生器中，采用阻容耦合负反馈方法控制等离子体放电发展过程，成功地抑制了辉光放电向火花放电的过渡，产生了稳定的交流辉光放电。

Combining Integral Equation and Analytical Method to Determine Eddy Current Losses of a Thin Steel Plate

积分方程与解析法组合计算薄钢板的涡流损耗

The concept of thermal stress intensity factors in a current-carrying plate with two same penetrated collinear cracks was built in this article.

文中建立带有两个等长度共线穿透裂纹载流薄板的热应力强度因子的概念。

On the basis of the international benchmark problem 21 on simulating 3D stray loss, the model on 3D eddy current loss is further presented and set in order to simulate core tie-plate made of non-magnetic steel in large transformers.

在模拟三维杂散损耗的第21国际基准问题的基础上，提出并建立了以模拟大型变压器铁心低磁钢拉板为背景的三维涡流损耗模型。

The experiments have studied the factors affecting electro-coagulation reactor system on the effectiveness, including retention time ( reaction time), electric current, polar plate spacing, concentration of Cl-and organic substance content in the influent etc.

实验对电凝聚反应器的各种影响因素进行了研究，包括停留时间（反应时间）、电流密度、极板间距、进水中Cl-浓度以及进水有机物浓度等。

Based on the two type of the initial round of the spiral plate in the spiral plate heat exchangers, two methods for spiral calculation were presented in this article. Compared with the current popular methods, the new methods is more systematic and precise.

本文根据螺旋板换热器螺旋板初始圈的两种形状，提出了两类螺旋计算方法，与目前流行的方法比较，新方法更具系统性和准确性。

Applications of Wavelet Analysis in Plate Surface Crack Detection with Eddy Current Testing Technology

小波分析在钢板裂纹电涡流检测中的应用

The authors will discuss the melting and casting technology to produce Cu Cr alloy casting, employing usual melting equipment and molding materials. The electric contact plate withstanding high voltage and current will serve as an example.

以采用常规的熔炼设备和造型材料熔铸出Cu－Cr合金铸件&高压大电流电极触头板为例讨论这一熔铸的工艺方法。

Current situation and variety requirement of wide plate rolling mill in China

我国宽厚板轧机现状及品种需求

Thermal Characteristic of Hot Plate in Alternating Current Electric Heater The Heat Storage Technique of Electric Heater

交流电电热器加热板温度的变化规律电热器蓄热技术

Thermal Characteristic of Hot Plate in Alternating Current Electric Heater

角膜热成形术交流电电热器加热板温度的变化规律

This paper explains the method that installing the special inspection jig in current instruments inspects deflection serrated form by using sciagraphy, then systematically introduces some problems such as the jig structure, the standard shaping plate of serrated form and the inspection method.

论述了在通用仪器上安装专用检验夹具用影像法检验变位齿轮齿形的方法，并系统地介绍了夹具结构、标准齿形样板、检验方法等。

The electromagnetic stress on the crack tip in metal plate with strong current

导电薄板内裂纹尖端区域的电磁应力

expressions of current density and joule heat source near the crack tip in an infinite plate under constant current were derived, as well as the temperature field and the stress field near the crack tip.

探讨了稳恒电流作用下无限大薄板裂纹尖端电流密度及焦耳热源功率的计算表达式，并进一步推导了裂纹尖端区域温度场及热应力场的分布形式。

the expression of current condensed and power of joule heat source near the crack tip in an infinite thin conducting plate under pulse current is derived, and the expression of temperature around the crack tip is obtained as well.

给出了脉冲电流作用下，无限大薄板中裂纹尖端附近电流密度及焦耳热源功率的表达式，并在此基础上，推得了尖端区域处温度的具体表达式。