polymer flooding的例句大全

The test showed that central area in the polymer flooding of the main zone of transitional belt could increase by over 8% OOIP;

结果表明：过渡带主力油层聚合物驱油中心井区比水驱提高采收率8%以上；

Results show that straight lines do appear in polymer flooding steady period in graph of cumulative oil production, cumulative water production, graph of cumulative oil production and cumulative liquid production.

结果表明，在聚驱阶段稳定后，累积产油量与累积产水量的关系和累积产油量与累积产液量的关系在直角坐标系中呈线性关系；

Polymer flooding has been widely adopted in Daqing Oilfield to enhanced oil recovery. In 2001, 8 million metric ton crude oil was produced by polymer flooding.

聚合物驱油技术已在大庆油田得到了大规模应用，2001年大庆油田聚合物驱的产油量达到800万吨。

The laboratory experiment on cross-linked polymer for in-depth profile control after polymer flooding

聚合物驱后交联聚合物深部调剖技术室内试验研究

The pilot test indicates that the technique of combining infill wells with polymer flooding is economically feasible.

结果表明，井网加密和聚合物驱技术结合经济可行。

Sensitivity of Testing Parameters of a Two Phase Well with Polymer Flooding

聚合物驱两相流试井参数敏感性

New and reasonable tubing centralizer arrangement method of polymer flooding artificial lifting well

聚驱抽油机井杆柱扶正器合理布置新方法

vertical residual oil distribution rules are presented by the contrastive data analysis from two obturated coring wells in duanxi, which are for water flooding and polymer flooding respectively, and the explanation is combined with sedimentary micro-faces.

对比分析了断西水驱和聚驱后密闭取芯井的资料，结合沉积微相，确定出聚驱后剩余油在垂向上的分布规律。

A Numerical Simulation of Normal Force from Production Liquid in Polymer Flooding Wells

聚驱井采出液法向力的数值模拟研究

modeling and predicting of water cut dynamics of polymer flooding

聚合物驱油含水率动态规律建模与预测

Tread on a worm and it will turn. Reverse microemulsion polymerization synthesis of temperature and salt resistance of polymer flooding in oil

蚯蚓被踩也会动（指：被逼过甚，最温顺者也会反抗）。反相微乳液法合成耐温抗盐聚合物驱油剂

Research on reasonable submergence depth of pumper during polymer flooding

聚合物驱抽油井合理沉没度的研究

The result shows that, compared with polymer flooding, polymer cross link micro gel has more remaining amount in multi porous, poor mobility and high injection pressure, so it has a nice profile controlling displacement effect.

实验结果表明，与聚合物驱相比，由于聚合物交联微凝胶在多孔介质内滞留量大，流动能力差，注入压力高，因而调驱效果好。

An application of Type C water-drive curve to evaluation of early polymer flooding effects in offshore fields

丙型水驱曲线在海上油田早期注聚效果评价中的应用

At the same time, considering the reserve ratio of single sand layers with net thickness over one meter, the paper has also established a polymer flooding EOR value evaluation model.

同时考虑油层中有效厚度大于1m单砂层储量的比例，建立了聚合物驱采收率提高值评估模型。

In particular, the development of polymer flooding technology make the composition of produced water is more complicated and more difficult to deal with.

特别是聚合物驱油技术的发展，让采油污水的组成更复杂，处理起来也更困难。

At present, most of the reservoir has entered high water-cut stage, through water flooding and polymer flooding in subsequent water flooding.

目前，大多数油藏已进入高含水后期，经历了水驱和聚合物驱阶段，处于后续水驱阶段。

impeding premature polymer production from polymer flooding reservoirs by way of in-situ polymerization and gel formation

单体地下聚合并交联形成凝胶——防止聚合物窜流的一种新方法

spontaneous emulsification flooding efficiency is better than those of surfactant flooding and polymer flooding.

自发乳化驱油效果好于表面活性剂驱及聚合物驱。

numerical simulation study for improvement of polymer flooding by viscoelastic effect

黏弹效应改善聚驱效果的数值模拟研究