polymerization process的例句大全

if the amount of diluting agent reaches 5-15%, the process will be regarded as modified mass polymerization process.

如果稀释剂加入量达5%~15%，这种工艺将被看作是一个改性的本体聚合工艺。

if a large amount of diluting agent is used, the process will be a solution polymerization process.

如果使用大量稀释剂，这样的工艺则为溶剂聚合工艺。

The emulsion acrylic glueing agent SL 407 was prepared with polymerization process of pre-emulsifying and whole dropping.

采用预乳化全部滴加的聚合工艺,制备乳液型丙烯酸酯类水性台板胶.

The title acrylate-polyurethane ( PUA ) hybrid emulsion has been prepared by in-situ polymerization process.

采用原位乳液聚合法,合成聚氨酯-丙烯酸酯 ( PUA ) 复合乳液.

The TGA measurements showed that the content of the grafted polymer can be adjusted by the ratio of the monomer and the chain transfer agent, so the polymerization process is controlled.

TGA测试表明接枝聚合物量可以通过单体与链转移剂之间的投料比来调控，这说明反应是可控的。

Heat evolution of the system was measured to characterize the polymerization process of acrylamide monomer in ceramic slurry.

采用单体聚合反应的热效应来表征含有陶瓷粉体的单体聚合体系的聚合过程方法，首次采用该方法分析了含有陶瓷粉体聚合体系的聚合热效应与单体聚合转化率的关系。

Cypermethrin microcapsules with urea-formaldehyde resin wall were prepared by in-situ polymerization process in aqueous medium.

以水为介质,脲醛树脂为壁材,用原位聚合法制备了氯氰菊酯微胶囊水悬浮液.

The activity and stereospecificity of the catalyst were so high that the very small amount of catalyst residues and atactic polypropylene possibly formed during the polymerization process might be left in the product without any further treatment.

由于该催化剂具有高活性和高定向能力，催化剂的残渣和无规物的含最很低，因而可以不经处理而残留在产品中。

The curing agent has been prepared by one-step catalytic polymerization process with a specific chemical additive.

采用特定的化学助剂,通过催化聚合法一步合成快干型低游离TDI聚氨酯固化剂.

The self-crosslinking acrylate latex contained functional monomer DAAM 、 acrylamide and NMA through pre-emulsification polymerization process was prepared.

通过预乳化乳液聚合工艺，合成了含官能团单体双丙酮丙烯酰胺（DAAM）、丙烯酰胺、N-甲基丙烯酰胺（NMA）的自交联丙烯酸酯乳液。

In this thesis, both steady and dynamic models have been developed for an industrial slurry ethylene polymerization process.

本文以乙烯淤浆聚合工业装置为研究对象，对生产流程建立了稳态和动态模型。

Polymerization process is a kind of typical chemical process.

聚合过程是典型的化工过程.

The textile product in test showed excellent flexility and the whole polymerization process is feasible to industry manufacture. The anti-UV property of the final product accords with the technical standards described in AS/ NZS 4399: 1966.

测试表明，所研制的抗紫外聚酯具有良好的可纺性能，其织物的抗紫外性能符合AS/NZS4399：1996技术文件标准。

It is prepared with slurry polymerization process and supported CT catalyst.

采用淤浆聚合工艺,利用负载型CT催化剂制得超高相对分子质量聚乙烯.

The effects of polymerization process on the conversion rate were discussed.

研究了聚合配方和工艺条件对浆料转化率的影响.

hyperbranched polymers are one type of dendritic macromolecules which can be synthesized by one-step polymerization process.

超支化聚合物是一类可以通过一 步法 来合成的具有高度支化结构的体型大分子.

ZnO/ polymer composite particles prepared by special polymerization process can improve the dispersibility of ZnO particles.

通过特殊的聚合工艺制备氧化锌/聚合物复合微粒材料，可改善氧化锌微粒的分散性，并且复合材料可综合无机和有机材料的优良特性。

Study on the oxidation thermal polymerization process of coal-tar pitches

煤沥青氧化热聚合工艺的研究

A model for styrene thermal polymerization process in tubular reactor has been developed starting from basic transport equation without adjustable parameters.

建立了管式层流反应器中苯乙烯本体热聚合过程的模型。

By means of the evaluation on the pitch production process with binder such as vacuum flashing process and thermal polymerization process, the property of coal pitch used as binder and its influence on carbon products quality are discussed, the conception of this pitch production process are given.

通过对真空闪蒸法和常压热聚合法等粘结剂沥青生产工艺的评价，讨论了作粘结剂用的煤沥青性能及其对碳素制品质量的影响，提出了生产优质粘结剂沥青工艺的设想。