position length的例句大全

Observe the position and length of inferior gluteal nerve reaching out from pelvic cavity.

观测臀下神经的长度、穿出的位置以及臀下神经出盆处的支数、位置。

From then on, people were able to measure time and determine seasons based on the position and length of the gnomon's shadow.

短袜尺寸变化的测定从此，人们便通过观测圭表上日影的长短变化来计算时间、测定季节。

Position Error Analysis of Tripods' Moving Platform Resulted from Length Error of Sliding Leg

三足并联机器人杆长误差引起的动平台位置误差分析

Through time aligning to the quality datum of strip steel, established the tracking algorithm between the quality data of strip steel and the lengthways position. Finally, the paper discussed the measure for correcting the length error.

通过对带钢各质量数据的时间对准，建立了精轧出口后的质量数据沿带钢长度方向上的位置跟踪算法，探讨了带钢长度误差的修正措施。

Because of shooter's different methods, habits and strength of bullet installation, the position depth, length, width and inclination of the marks are different, sometimes there are few marks or even no marks.

由于射手向弹匣内压装枪弹的方式、习惯、用力大小等因素不同，形成痕迹的位置、深浅、长短、宽窄、倾斜角度等也就有所不同，有的甚至不留下痕迹或很少留下痕迹。

The task priorities are based on both the particle position and the task height, and the scheduling schemes are formed with the list scheduling techniques, while the schedule length is used as particle's fitness value.

算法将粒子位置和任务高度作为任务的优先级，通过表调度技术生成有效的调度方案，并将调度方案对应的调度长度作为粒子的适应值。

This paper solves the positive position solution, the inverse position solution and the passive joints solution of the fixed length 3-PRS parallel mechanism of the machine tool;

推导了该车铣复合加工中心的定杆长并联机构3-PRS的位置逆解、位置正解和被动关节求解算法；

A control strategy is advanced combined with tape cutting to solve the problem of the tape length random changing in the ATL processing, and the tape position is accurately fixed.

为解决预浸带位置随机变化的问题，提出一种与切带动作相结合的定位控制方案，实现了预浸带的准确定位。

ecu had constant anatomical position, sufficient length and strength. the direction of transferring ecu to epb tendon was consistent with that of abductor pollicis brevis, and the angle of thumb supination was enough to pronate.

结论（：1）尺侧腕伸肌长度、肌力足以重建拇对掌功能，拇短伸肌腱止点恒定，联合移位后其作用方向与拇短展肌方向一致，且旋前角度足够。

the change of ion current is analyzed from ion probe length, bias voltage, chemic ratio and probe position. an ion based pressure sensor with single-pole and short probe is designed.

试验分别从离子探针长度、偏置压力、化学恰当比和探针位置四个方面研究离子电流的变化情况，并在两种类型离子探针的基础上设计出一种单针短探针型离子电流传感器。

from the experimental results the effects of nozzle axial position and mixer tube length upon ejector characteristic are revealed.

对实验结果进行分析，指出喷嘴轴向位置，混合管长度对引射器特性的影响。

zooming optical system is a system in which the focal length can be changed continuously but the image surface position keeps stable.

变焦距光学系统是一种焦距可连续改变而像面位置保持稳定的光学系统。

in order to determine the position of the theodolite, a star-observing tv system with adjustable image position and fixed focal length was developed.

为了标定试验设备空间位置，研制了一种像面位置可调的定焦距标星电视系统。

The substring starts at a specified character position and has a specified length.

子字符串从指定的字符位置开始且具有指定的长度.

Determine the position of C-ring sp-ring according to the length of yke.

根据卡套密封 长度确定 卡簧沟位置,用专用滚沟机滚沟.

Objective To study the influence of the length of time and position of the thermometer on the older people's axillary's temperature measurement with the aim at improving clinic nursing work.

目的研究老年患者腋下体温测量不同时间与不同体位对所测体温值的影响，以指导临床护理工作。

The effects such as welding position, rewelding times, pre-heat and slowly cooling, arc stop/ strike and length, power selection, environment control, sequence, direction, and assembly were analyzed.

分析了焊接位置、补焊层数及两面补焊、预热和缓冷、补焊的收/起弧及长度、电源选择、环境控制、补焊顺序和方向，以及装配等因素的影响。

This article measures the improvements in the structure of stretching channel and its distribution by means of taking the channel in position, covering friction, controlling the length of the cable and bent of bar in post-tensioned concrete girder.

对后张法预应力钢筋混凝土梁张拉孔道的构造与布局、保证孔道准确的措施、孔道摩阻和钢丝束伸长量以及钢筋构造等，进行简要论述。

Because the workspace's boundary curve is the farthest point the nose of tool can reach, the boundary point can be obtained by computing mechanism's position inverse solution basing on the idea that one of the six legs reaches the largest length.

由于活动空间的边界曲线为刀具刀尖所能达到的最远点，所以根据从六条腿中一条腿达到最大长度时计算机构的位置反解，可求得其边界点。

The second is Column Averaged-Adjacent Position Relevancy Encoding ( CA-APRE), which reduces code length more than 15%& 30% to adequately utilize the transcendental structure information of row and column in a binary image, and keeps encoding and decoding computation the same as before.

另一种是列等分相邻位置关联编码（CA-APRE），CA-APRE充分利用了图像的行列先验结构信息，可减小复杂二值图像的码长15%&30%以上，且编解码运算量与原方法相同。