pressure atomization的例句大全

nozzle core is the key part of the pressure atomization nozzle.

喷嘴芯是压力型雾化喷嘴的关键部件。

the hydraulic pressure atomization is the main means of application of pesticide product at present. spray nozzle is the key part of the crop protection mechanism in the process of atomization, whose performance decides the pesticide product efficiency.

大部分农药的施用，以药液雾化喷洒方式为主，喷头是植保机械中实现液体雾化的关键部件，喷头性能的优劣，直接关系着农药有效利用率的高低。

High pressure water mist sprayer in order to realize the good atomization, the spray pressure must be to 7 MPa or above. After the pressure increase to 10 MPa, the fire fighting efficiency will get more improved.

高压细水雾喷头要实现良好雾化，喷雾压力必须在7MPa以上；但压力提高到10MPa后，细水雾的灭火效率才得到更大的提高。

Of process parameters on the bonding strength of coating from the primary to the meeting were: spray distance, atomization air pressure, spray voltage, spray current.

工艺参数对涂层结合强度的影响由主到次依次为：喷涂距离、雾化空气压力、喷涂电压、喷涂电流。

The technological parameters of pressure and flow of the solution spout, the atomization spout and the oxy-acetylene spout were determined by complete combustion calculation, atomization experiments of initial liquid and combustion experiments.

通过完全燃烧计算、雾化试验和燃烧试验，确定了溶液喷口、雾化剂（O2）喷口和氧&乙炔喷口的压力和流量的工艺参数。

The measuring installation and test stand was designed. The experiment to research the effect of cross flow velocity, spray jet angle and atomizer working pressure on atomization was prepared.

根据研究需要制定横向流雾化实验方案，设计测量装置和相关实验台，为将来实验研究横向流速度、喷嘴喷射方向和工作压力对横向流雾化的影响做准备。

How to ignition to SMW in CFB, author has developed the oil atomization nozzle at low pressure with micro-expanded tangent channels ( Chinese Patent, No. ZL. 022422765) for the first time.

针对医疗垃圾点火启动比较困难的问题，首次提出并开发了有渐扩切向槽的低压燃油喷嘴（获中国专利，No.ZL.022422765）。

The atomizing nitrogen pressure is the key factor of influencing the super-tiny spherical aluminum powder rate in aluminum powder atomization process.

铝粉雾化生产过程中，雾化氮气压力是保障雾化铝粉的成型率和细粉率的关键参数。

high pressure water mist; sprinkler; numerical simulation; spray characteristic; atomization process; droplet size distribution;

高压细水雾；闭式喷头；数值仿真；喷雾特性；雾化过程；雾滴尺寸分布；

Effect gas inlet pressure, geometrical de-sign and relative position of metal delivery tube, atomization gas, etc.

本文研究了雾化压力 、 导液管的几何形状和相对位置以及雾化介质等因素对雾化过程导液管末端气体射流与金属液流作用区压力特征的影响规律.

The pressure drop was the driving force of atomization by nozzle.

压降是喷嘴雾化的原动力.

This article introduces the atomization mechanism of atomization nozzle in the circulatory system, makes a deep analysis in the structure characteristics of low pressure swirl atomizing nozzle and the influence of structure parameters on atomization performance.

介绍了循环系统中雾化喷嘴的雾化机理，深入分析了低压旋流式雾化喷嘴的结构特点和结构参数对雾化性能的影响。

The relationship model of static head in tundish, atomization pressure on the tip of nozzle and the mass median droplet diameter was established.

本文建立了静压头、雾化压力与雾化熔滴尺寸的模型关系。

The atomization mechanism of hypergolic rocket propellant and decomposition combustion at high pressure and turbulence burning of premixed reactant flow field are considered.

数值仿真模型中考虑了自燃推进剂雾化机理、高压分解燃烧和预混反应流湍流燃烧等。

The result shows that atomization quality becomes bad when the spray pressure reduces, but the size distribution becomes more well-proportioned.

说明随着喷射压力的降低，雾化质量变差，但尺寸分布更加均匀。