pressure element的例句大全

By discussing the detailed structure of increasing pressure element, heat transfer elements, throttle and the working process, the structure design of the refrigerating system is introduced based on low pressure air as power and working medium.

通过详细论述增加单元，换热单元和节流制冷单元的结构和工作过程，介绍了一种以低压空气作为动力和工作介质的制冷系统结构设计。

Said arrester for retaining the elastic pressure element in the setting position can be fixed to the body by means of a detachable or permanent connection.

用于把弹性施压零件保持在设定位置的限动件可通过可拆的或永久性的连接固定于本体。

The elastic pressure element is fixed to the body by means of a detachable or permanent connection.

弹性施压零件是通过可拆的或永久性的连接固定于本体。

It discusses new methods including in out boundary element method and forecast of temporary supporting pressure during the initial stage of excavation.

内外边界元方法和开巷初期临时支护压力预测等新方法。

The Elasto-Plastic Finite Element Analysis of Thick-Walled Cylinder Under Internal Pressure and Its Application to the Final Sizing Technology of Welded Pipe End

受内压厚壁圆筒的弹塑性有限元分析及其在焊管管端定径工艺中的应用

In this paper, two types of isoparametric finite element are used to predict surface pressure distribution on the three dimensional wing which are placed in the subcritical steady flow by the variational FEM.

本文使用了两种类型等参元，通过变分法，计算了三维机翼亚临界定常位势流中的压力分布，计算结果与试验结果符合较好。

Boundary element method for pressure calculation of arbitrary shape and mixed boundary reservoir

用边界元法计算任意形状混合边界的油藏压力

the chemical factors include chemical precipitation, pressure solution and element migration, and their actions are as follows: ① chemical precipitation develops in unsealing fault;

化学因素包括化学沉淀作用、压溶作用和元素迁移，其影响规律为：1化学沉淀作用在开启性断裂中发育；

Optimization Design of Large High Pressure Vessel Based on Finite Element Analysis

基于有限元分析的大型高压釜优化设计

The solubility of Ca in liquid manganese and the interaction effect of third element were determined in a sealed Mo reaction chamber by vapor pressure method.

用密封容器气液平衡法，测定了Ca在Mn液中的饱和溶解量及第3组元C、Si、Ni、Al、Cr和As对其的影响。

The utility model relates to the field of nuclear fuel components, in particular to an upper tube seat of a pressure water reactor fuel element.

本实用新型涉及核燃料元件领域，具体涉及一种压水堆燃料组件上管座。

Meanwhile, the four corners are respectively and symmetrically provided with positioning pin holes, so that the assembly of the pressure water reactor fuel element can be more flexible and convenient.

同时，在四角位置分别对称布置定位销孔，从而使压水堆燃料组件的安装更加灵活方便。

Based on the model experiment and finite element analysis, structural static performance of a pressure spherical model with a big viewport is discussed in this paper.

结合模型试验和数值计算对大潜深、带大开口的球形耐压结构静态力学性能进行了研究。

Based on the model experiment and finite element analysis software ANSYS, this paper focuses on the deep submersible spherical endure pressure shell with an observation window of big bore, mechanics property of which is studied.

结合有限元分析软件ANSYS对大潜深、大开口观察窗壳体结构模型的静态力学性能进行了数值分析及试验研究。

The effect of distribution status of film pressure of journal bearing on shaft stress is studied by finite element method on condition that the boundary condition of load is made by lubrication analysis of journal bearing.

根据轴承润滑分析结果，确定载荷边界条件，应用有限元方法研究了轴承油膜压力分布形态对轴应力的影响。

Normal pressure, temperature of tool surface and relative sliding velocity between tool and workpiece are obtained through the above finite element analysis.

利用二维热力耦合有限元模型对不锈钢时的切削过程和热传递过程进行了仿真分析，得到了刀具表面的应力、温度以及刀具与工件之间的相对滑移速度。

In light of the three-dimensional effect of split Hopkinson pressure bar ( SHPB) device for large diameter rock specimen, solid simulation is conducted with three-dimensional nonlinear dynamic finite element code;

针对大直径岩样专用SHPB试验装置存在的三维效应问题，从三维实体研究入手，利用非线性动力分析有限元程序对不同形状系列冲头进行了实体模拟；

the chemical factors include chemical precipitation, pressure solution and element migration, and their actions are as follows: ① chemical precipitation develops in unsealing fault;

化学因素包括化学沉淀作用、压溶作用和元素迁移，其影响规律为：1化学沉淀作用在开启性断裂中发育；

Finite Element Analytical Design of End Socket Chute on High Pressure Welding Tester

高压焊接试验舱封头斜管有限元分析设计

Stress Analysis for Tangential Bonded Structure of Pressure Vessel and Pipe Based on Finite Element Method

压力容器与切向接管结构应力三维有限元分析及强度评定