pressure element的例句大全

By means of finite element analysis and theoretical derivation, this paper presents a new impervious design method on the reinforced concrete lining of circular water pressure tunnel and proposed design recommendation according to the calculated results.

通过理论阐述和有限元计算分析，研究了有压圆形隧洞钢筋混凝土衬砌一种新的防渗漏设计方法，即预留人工缝的防渗漏设计法，并根据分析结果提出了设计建议。

The contact element method and original stress method were used to analyze the elastic plastic contact problem of wheel/ rail with measured surface micro roughness. The distribution of surface contact pressure on the rail was obtained.

采用接触单元方法，结合初应力法，采用测量获得的表面微观粗糙度，对轮轨弹塑性接触问题进行了研究，获得了轮轨的表面接触压力分布等结果。

Analysis of structural deviation of C-type piezoresistive pressure sensors using the finite element method

压阻式压力传感器C型结构偏差的有限元分析

IP PBX network element management system is implemented in such low-cost pressure circumstances.

IP PBX网元管理系统就是在这样的低成本压力下实现的。

Apply finite element simulation to the model by COMSOL, obtained the temperature distribution, the concentration distribution, pressure distribution in the porous medium, and then the model was validated by experiment.

利用COMSOL对该模型进行有限元计算，得出多孔介质内温度、浓度和压力分布，并通过实验对其进行验证。

A new type oil-filled high pressure transducer based on piezoresistive element

一种新型充油压阻高压传感器

Definite Element Study of Thermal Deformation and Stress of An Automotive Clutch Pressure Plate

汽车离合器压盘热变形和热应力的有限元分析

Three Dimensional Finite Element Analysis on Pressure of Femoral Head Affected by Hip External Fixator

髋关节外固定器对股骨头压力影响的三维有限元分析

Then on the basis of the cylindrical tank hydrodynamic pressure formula, the ESD hydrodynamic pressure formula which may be helpful for the designing is presented by analyzing on the numerical hydrodynamic pressure results from ESD finite element model.

结合圆柱形消化池动水压力公式，通过不同地震作用下动水压力数值计算结果，给出了针对卵形消化池动水压力的计算公式，为工程人员的设计工作提供参考依据。

Finite element calculation for seismic stress of vertical oil tank of normal pressure

常压立式储油罐地震应力的有限元计算

According to the interlayer contact model of the cylinder, a finite element contact analysis model of the end connecting zone of the spherical head and the cylinder of the integrated multilayer-wrapped high pressure vessel has been established.

在筒体层间间隙接触模型分析的基础上，建立了多层筒体与球形封头连接区有限元分析模型。

A Semi-analytical Finite Element Method in Calculating Penstock's Stability under External Pressure Considering the Effect of Initial Interstice

考虑初始缝隙因素作用钢管抗外压稳定计算的一种半解析有限元法

finite element analysis of a limit load on corroded pressure pipeline;

带体积型缺陷压力管道极限载荷的有限元分析；

finite element analysis of the tooth root bending stress. of an unsymmetric gear with double pressure angles

双压力角非对称齿廓齿轮齿根弯曲应力的有限元分析

finite element strength analysis of head chamber of high temperature and high pressure dyeing machine

高压高温染色机机头箱的有限元强度分析

Using the basic principles of interior ballistics, after analysis on the energy equation and equations of motion of fly plate, high pressure driving model of kill element rotating and flight in driver device is set up.

利用内弹道学基本原理，经过对飞盘能量方程和运动方程的分析，建立了高压驱动飞盘旋飞运动的工程计算模型，通过理论计算分析了飞盘旋飞运动规律。

the pressure detecting element and the temperature measuring element share the probe at the bottom part of the shell.

压力探测元件和温度测量元件共用壳体底部的探头。

analysis of behaviors of earth pressure behind counterfort retaining wall with finite element method

高大扶壁式挡土墙墙后土压力特性有限元分析

computation of pore - water pressure and liquefaction predicating for non- linear dynamic finite element analysis of soil

土层非线性动力有限元分析中孔压计算及液化判别

model of rankine soil pressure considering influence of displacement and the calculation by using finite element method

考虑位移影响的Rankine土压力模型及有限元计算分析