pressure spring的例句大全

A tapered tube variable area ring orifice device for wet gas measure is developed. It combines a tapered tube, an inner circle-shaped movable baffle, a precision spring and a displacement sensor. Flow equation is given, with distance displacement for pressure difference.

本文提出了一种锥形管变面积环孔装置，用于湿气计量，采用锥形管、内圆形可移动阻流件、精密弹簧和位移传感器组合的结构设计，给出了用位移代替差压的气体流量方程。

each air cylinder all has the admission valve piece and the discharge valve piece which shuts by the spring pressure.

每个气缸都有由弹簧压闭的进气阀片和排气阀片。

control supply line water pressure . install a soft seated , spring loaded, check valve upstream of the assembly.

控制供应管道的水压。在总成的上游安装一个软阀座，弹簧负载止回阀。

to avoid this discharge, install a spring- loaded check valve ahead of the backflow assembly to "lock-in" the downstream pressure.

为了避免这种排放，应该在防回流阀总成前面安装一个弹簧负载止回阀来“锁定”下游压力。

high pressure adjusting spring bearing plate

高压调整弹簧压板

a pilot-operated vent valve for pressure relief uses tank pressure, not weights or a spring, to keep the vent valve seat closed.

先导式通气阀泄压时利用储罐压力，而不是重力或弹簧外力，来保持通气阀阀座关闭。

spring loaded pressure relief valve

弹簧加载的压力泄放阀

the resulting differential pressure is applied to the ends of the spool valve, raising it from its spring-centered null position.

结果导致滑阀端部产生差压并将其自弹簧中心电气零位提升。？

spring for pressure limiting valve

限压阀弹簧

marc. the influence of several parameters such as inner pressure, angle of fiber, fiber layer number and fiber layer thickness on the vertical stiffness characteristic of the air spring is simulated and analyzed.

Marc对空气弹簧的非线性垂向刚度特性进行了数值模拟，分析了胶囊内压、帘线角、铺层厚度、帘布线层数对空气弹簧垂向刚度特性的影响。

closed spring loaded low lift type high pressure safety valve

弹簧微启封闭式高压安全阀

industry: pressure processing; stamping die; spring film; torsion spring; contact pad; contact;

所属行业：压力加工；冲压模；片弹簧；扭转弹簧；触片；触点；；

low pressure safety valve spring

低压安全阀弹簧

As the driver lets loose the clutch pedal, spring pressure increase on the clutch parts.

由于司机松开离合器踏板让, 弹簧离合器零件的压力增加.

The retracting spring pulls the pressure plate away from clutch plate thus disengaging clutch.

回动弹簧将压力板拉远离合器板,因此可以分离离合器.

The retracting spring pulls the pressure plate away from the clutch plate thus disengaging the clutch.

在回缩弹簧拉压盘离合器片远离从而脱离了离合器.

Some dummies have spring loaded arms, so that the arms give realistically to pressure.

有一些人偶具有弹性装置的手臂, 这样它们手臂在打压过程中就更能增加真实感.

The check valve shall utilize single torsion spring design to minimize pressure drop through the assembly.

止回阀应该采用单个扭力弹簧结构以减少通过总成的压降.

Due to the release of pressure when removing cover, the relief valve spring may eject quickly.

因为在拆卸阀盖时松开压力, 安全阀弹簧可能会快速弹出来.

SY 1 series downhole pressure gauge is made of spring tube.

SY1型系列井下压力计,是一种弹簧管式井下压力计.