pressure surface的例句大全

the connecting part of the guide head and the guide rod forms a pressure surface used to bear pressing from the press piece;

导向头与导杆的连接部形成一承压面用于承接来自按压件的施压；

The results show that the non-uniform flow wake induced by secondary motion and vortex always appear in the corner region of casing wall and pressure surface;

研究结果表明：二次流和涡运动导致叶道出口流动尾迹发生于外端壁/压力面角域；

The optimal fence is located in the foreside of the passage, about 30% pitch far away from the pressure surface, with the height of 1/ 3 incoming boundary layer thickness and the length of 3/ 4 axial chord.

加装在距叶片压力面30%节距处且高度为1/3来流附面层厚度、占据前3/4流道的翼刀布置方式为本文所给出的最佳翼刀位置。

Research on the effect of jet flow from pressure surface to suction surface on performance of blade

叶片压力面到吸力面射流对其气动特性的影响

Application of Surface Control and Monitor System in Injection/ Down Pressure Testing of Coal Bed Gas

地面控制监测系统在煤层气井注入/压降测试中的应用

Research of Key Technology for Surface Modification of Textile Material by Atmospheric Pressure Glow Discharge Liquid Deposition

纺织材料表面改性大气压辉光放电液相沉积关键技术的研究

The Experiment of the Pressure Distribution on The Coal Log Surface in Constant Flow in Pipe

定常管流中煤锭表面压力分布实验研究

This article mainly analyses the factors that affect the precise indexer life, touching surface pressure, basic motion load and temperature factor for example.

着重分析影响精密分度装置寿命的接触表面压力，基本动载荷，温度系数等因素。

Through finite element numerical calculation and experiment test on pressure vessel containing inner portrait surface crack, the results show that;

通过对一台含内壁纵向表面裂纹的实物压力容器的有限元数值计算和实验测试，结果显示：初始椭圆形表面裂纹在疲劳扩展过程中形状逐渐趋圆并保持圆形继续扩展。

The test conditions and main results of wind tunnel test for Terminal 3 at Beijing Capital Airport are introduced. The block shape coefficients for the most unfavorable conditions are given, which clearly show the characteristics of the wind pressure distributions on this long-span roof surface.

介绍了超大跨度屋盖结构&北京首都机场3号航站楼的模型风洞试验概况和主要结果，给出了屋面在最不利工况下的分块体型系数，清楚地显示了屋面的风压分布特征。

Differential Pressure Casting and Its Liquid Surface Forcing Control System

差压铸造及其液面加压控制系统

Calculation of Divergent Velocity Pressure of Wing Surface by Using NASTRAN Software

用NASTRAN程序计算翼面的发散速压

A statistical thermodynamic model of surface tension for pure fluids at high pressure

加压下纯流体表面张力的统计热力学模型

Oxygen plasma to modify the fine-PET. The law of effects of plasma treatment time, gas pressure, discharge power on wettability, crystallinity, surface thermodynamic potential and dye up-take was discussed.

探讨氧等离子体放电时间、放电气压和放电功率对细旦涤纶润湿性、结晶度、表面热力学电位（Ψ电位）以及上染率的影响规律。

The experimental results show that both plasma radiation intensity and lines signal-to-background ratio increases distinctively along with rising the pressure for sample preparation; the more symmetrical and exquisite of sample surface, the more obvious of enhancement effect on the plasma radiation.

结果表明，随着制备样品所施加压强的提高，等离子体辐射强度和光谱信背比都有不同程度的提高；样品表面粒度越均匀越细腻，等离子体辐射增强效果越明显。

ON THE ELIMINATION MEASURES OF PRESSURE PEAK DRIVEN BY ACOUSTICALLY UNSTABLE COMBUSTION IN VENTED GAS EXPLOSIONS Study on the strip surface wrinkles and the elimination measures in cold temper rolling

可燃气体爆炸泄压过程中声动不稳定燃烧压力峰减弱方法的研究

Taken bovine muscle for example, the influence of operation conditions, such as surface temperature of the material being dried, chamber pressure and thickness of slab, was analyzed based on the drying dynamic model and the exergy loss model.

结合升华干燥动力学模型和损失分析模型，以牛肉为冷冻干燥过程的模型物料，计算了物料表面加热温度、干燥室压力和物料厚度等操作条件的变化对升华干燥过程损失的影响。

In this paper, two types of isoparametric finite element are used to predict surface pressure distribution on the three dimensional wing which are placed in the subcritical steady flow by the variational FEM.

本文使用了两种类型等参元，通过变分法，计算了三维机翼亚临界定常位势流中的压力分布，计算结果与试验结果符合较好。

A time-domain pressure wave method for solving forces and moments acting on a three-dimensional body with arbitrary motions near free surface is presented.

本文提出了求解近水面三维物体作任意运动时受到的水动力和产生的波浪的压力波方法。

Then, using propeller lifting line theory to calculate the geometric theory parameters and the hydrodynamic parameters, calculated pressure distribution, thrust coefficient and torque system number with the lifting surface theory, using the panel method to calculate propeller thrust coefficient and torque coefficient.

然后，用升力线理论计算了螺旋桨的几何参数和水动力参数，并用用升力面理论计算了压力分布、推力系数和扭矩系数，用面元法计算了螺旋桨的推力系数和扭矩系数。