processing cost的例句大全

The experiment results indicate that the thermal cutting method with the new-style equipment is effective and valid and the processing cost could be greatly reduced and has significant meaning for the extensive applications of the engineering ceramics materials.

该试验说明了应用该小功率水介质等离子弧辅助加热切削氮化硅陶瓷材料的方法可行而有效，能够大大降低加工成本，对促进工程陶瓷材料的更广泛应用具有重要意义。

in this article, the influences of bleaching solution formula and technology on bleaching effect and processing cost were analysed.

本文通过三个单板漂白实例分析，论述了漂白配方、漂白工艺对单板的漂白效果及漂白加工成本的影响。

Therefore, The applications of this low-alloy bainite cast steel to ore crusher and ore mill can remarkably increase the operational efficiency of these equipments and decrease the processing cost of ore powder.

因此，这种低合金铸钢应用于矿山行业，可明显提高破磨设备运转率，降低矿粉加工成本。

all components are injection moulded for high efficiency and low processing cost.

该泵零部件均为注塑成型,生产效率高,加工成本低.

The aim of processing costing method ( ABC costing) is to attribute the indirect cost of manufacturing based on cost motivation, and through analysis to eliminate and cut down unnecessary processing so as to reduce products' cost.

作业成本法（ABC成本法）的重点是对生产成本中的间接费用依据成本动因进行分配，并可以通过对作业价值链的分析消除和压缩不必要的非增值作业，最终降低产品成本。

The reliability optimum design for technological plan on considering processing cost

工艺方案的可靠性优化设计

at the same time, the processing cost was so high that minor enterprises could not stand the racket.

在同一时间，处理的成本是如此之高，中小企业无法忍受的处境。

Compared with prepreg tape winding, wet winding can effectively reduce the processing cost of composites.

相对于乾法缠绕成型而言, 湿法缠绕成型可有效降低复合村料的制造成本.

responsible for customer complaint processing cost measuring, reporting.

负责对客户投诉,加工成本测试及汇报工作.

Assessed by production application experiment, the wear of PCD thread mill cutter is analyzed. Based on wear mechanism, the wear root cause of PCD thread mill cutter is found. Single piece processing cost is determined.

通过生产应用试验，分析了PCD螺纹铣刀的磨损情况，根据磨损机理分析出PCD螺纹铣刀磨损原因，并确定PCD螺纹铣刀的单件加工成本。

it has important value in reducing the drawing number and the processing cost, achieving better economic results and improving technical standard of drawing die of the thin stainless steel at home.

对减少拉深次数，降低加工成本，取得良好的经济效益，以及提高国产薄壁不锈钢拉深模具技术水平有重要的价值。

However, the costs of processing demand deposit transaction are increasing, and the effective overall cost of demand deposits is closing to the cost of passbook saving.

然而，处理活期存款的交易成本在不断上升，因此活期存款实际总成本已接近存折储蓄的成本。

Through reasonable size mixing processing and sizing processing, sizing hairiness are reduced, starch marks& defective goods are reduced, loom efficiency are enhanced and sizing cost are reduced too.

通过合理设定调浆工艺及上浆工艺，减少了浆纱毛羽的再生，降低了浆斑疵布，提高了织机效率，降低了用浆成本。

The Development of Low Cost Gasoline Engine Oils with Base Oils Produced under New Connected Processing

利用组合工艺基础油开发低成本汽油机油产品

The activity based costing method is improved in three aspects to meet the special requirements of shipbuilding cost feedback, including unifying the processing mode of the direct and indirect cost, put together and assigning costs in the generalized work center, and combining the cost motive.

为适应船舶制造成本反馈的特殊需求，对作业成本法进行了三点改进：统一了直接成本和间接成本处理方式、以广义工作中心进行成本归集和分配、合并了成本动因。

The processing precision and surface quality of diehead spiral gear are improved, resulting in an improvement in the quality of aluminum electrolysis carbon anode, by which higher efficiency and lower cost are reached.

该工艺铣削出的模头螺旋齿的尺寸精度和表面质量有了大幅度提高，进而提高了铝电解碳阳极的质量，提高了工效，降低了生产成本。

Simple data link ( SDL) is a new data link protocol with simple processing and low overhead cost.

简单数据链路协议（SDL）是一种新的且具有实现简单和低开销特点的数据链路协议，其同步方式采用了帧头循环冗余码（CRC）校验实现。

The paper put foward the basic principle, technological process and conditions that product the tetrabromoethane, light magnesium oxide and ammonium chloride taking the waste residue from processing the maltol& the basic magnesium bromide as raw material. The production cost was estimated.

提出了以麦芽酚生产中的废渣&碱式溴化镁为主要原料，生产四溴乙烷，轻质氧化镁和氯化铵的基本原理、工艺过程和主要工艺条件，并估算了成本。

china economic growth pattern is based on low cost expansion based on rapid growth of fdi and processing trade.

依赖FDI和加工贸易的迅速增长，我国形成了低成本扩张的外向型经济增长模式。

But with the development of processing trade, the cost of labor escalated, trade barriers became daily frequency, international competition got to much more impetuously.

但是随着加工贸易的发展，由此带来的劳动力成本逐步提高、贸易壁垒日渐频繁、国际竞争更加激烈等问题越来越多。