processing temperature的例句大全

the influences of preparation conditions on the electrical properties of polymer composites have been studied. it is found that processing temperature and processing method are the determining factors of the electrical conductivity of sn-pb alloy loaded polymer composites.

第二章重点研究了Sn-Pb合金聚合物基复合材料的电学性能，具体为制备工艺对导电性能的影响、导电性能的温度依赖性和环境（主要为溶剂中）依赖性。

This paper reports the hot laminating property of Maleic Anhydride grafted polyethylene ( MAH-g-PE) with aluminium ( Al) foil. Experiments shoal. that the peel strength of the resulting laminated film depends largely on processing temperature and grafting degree of MAH.

本文报道了马来酸酐接枝聚乙烯（MAH－g－PE）与铝箔的热粘接性能，并实验确定了热复合所需的温度、压力、时间条件以及接枝率的影响。

The research work above provides theory basic for exactly modeling and quality controlling of laser processing temperature field having the character of scanning and superposing process.

上述研究工作为具有扫描叠加过程特点的激光加工温度场精确建模和质量控制提供了理论基础。

the resin prepared by the method has a wider processing temperature window, simple reaction process and easy operation;

本发明制备得到的树脂有较宽的加工温度窗，反应过程简单，容易操作；

Next, the flowering season and sees the cotton wool time cotton and kapok corolla level air temperature to be high, the flowering season the time interval planting density high processing temperature was also noon high, otherwise early, late.

其次，花期和吐絮期棉花冠层空气温度较高，花期中午时段种植密度高的处理温度也高，早、晚则反之。

the effect of element c on heat-treatment processing temperature window of 600 ℃ high temperature titanium alloy

C元素对600℃高温钛合金热处理温度窗口的影响

The results showed that the normal growth of refined grain at the pertinent thermal processing temperature range and holding time has no deteriorative effect on the refinement, i.e., the refined grain was still much finer than unmodified grain.

结果表明，热加工温度下材料内部正常晶粒长大不会使其丧失变质细化效果，晶粒仍比无变质细化的铸棒细得多。

The experiment shows that the tensile strength and elongation of monofilament depend largely on the processing temperature, morphology and fusion level.

实验还表明，单丝的拉伸强度和相对伸长率与它的加工温度、形态和熔化程度有密切的关系。

To its 240 ℃ under tau~ gamma flow curve, 240 ℃ under melt the body surface view viscosity with to compose and the shear rate relations and the melt body surface view viscosity and the processing temperature relations have made the outline.

对其240℃下τ~γ流变曲线、240℃下熔体表观黏度与组成和剪切速率的关系及熔体表观黏度与加工温度的关系作了概述。

The relative conductivity of the plants increases under the condition of late spring coldness, and trend gradually increased with the processing temperature and processing time increasing.

倒春寒使植株电导率值增大，并有随着处理温度的降低和处理时间的增加而逐渐增大的趋势。

the processing temperature all along is below 90 ℃, which is compatible with the fabrication of flexible electronics.

整体工艺温度低于90℃，与柔性电子学相兼容。

These are the basis of studyi ng critical processing temperature for propellants.

这些可以作为研究火药工艺温度的基础.

adjust processing temperature according as the extruder screw.

根据挤出机大小及其螺杆塑化能力适当调整加工温度.

the decomposing temperature of complex of copper nitrate with 15-c-5 is over the processing temperature of uhmwpe, so it is used filling in uhmwpe.

15-冠-5与硝酸铜配合物的分解温度超过了UHMWPE的加工温度，决定用它对UHMWPE进行填充改性。

The valuable conclusions are followed here based on the experimental study and comprehensive analysis.1.In the full array test, taking the coating thickness as indicator, we analyze the steel, processing temperature and processing time on coating thickness.

通过以上分析研究，得到以下结论：1.在全排列试验中，主要以覆层厚度为考察指标，分析钢种、处理温度与处理时间对覆层厚度的影响。

Due to the special properties of semi solid metal, lower processing temperature compared to that of liquid metal and lower yield strength compared to that of solid metal, it provide a possibility for the thermal precise forming of metal with high efficiency and low consumption.

由于半固态金属具有特殊属性，即加工温度低（与液态加工比）、变形抗力小（与固态加工比），为高效、低耗实现金属热精密成形提供了一种现实可能。

The spinning solution would better with concentration of 14-16%, inherent viscosity of polymer of 1.5-1.8 and processing temperature of 50-70 ℃.

较适宜的纺丝原液的浓度在14-16%，聚合物的比浓对数粘度为1.5-1.8，加工温度为50-70℃。

This chapter described how the system works and the echo signal processing principles, and preceded hardware simulation test of the entire measurement system, got ideal temperature and pressure measurement curve.

对系统的工作原理及回波信号的处理原理进行了介绍，并给出了整个测量系统的硬件仿真测试，获得了理想的温度压力测量曲线。

Design of Signal Processing for a Field Bus Based Temperature Measurement Control Instrument

一种现场总线温度测控仪信号处理方案

Additionally, the influences of some operational and controlling factors such as temperature, ligand and buffer concentration, as well as data processing method, are also extensively discussed in this article.

另外，对数据处理方法以及测定结合常数的影响因素如温度、配体及缓冲溶液的浓度等也进行了详细评述。