product particle的例句大全

The effect of the reaction conditions on reaction rate and final product particle size was also studied.

同时考察了反应条件对反应速度、最终产品粒度的影响。

The Effect of Technological Parameters of Rolling Press on Product Particle Size

辊压机的工艺参数对产品粒度的影响

The crushing product particle size could be lower than 4mm when Auto Inner Cycling Fine Crusher ( ACFC) was used in fine crushing.

自循环超细粉碎机可以将破碎产品粒度降至4mm。

The analysis and particle size of EMD semi product after neutralization(ⅱ)

EMD半成品中和后的粒径及分析（Ⅱ）

We also gave an insight into the effects of pyrolytic temperature, time and temperature rise rate on the particle size and appearance of final magnesia product.

对热解温度、热解时间和热解升温方式对产品的粒径和形貌的影响也进行了探讨。

According to the practical production experiences, the optimization of TiO_2 preparation process are expounded from grinding, centrifugalization, deposition to filtration. The agglomeration particle content in the product is obviously decreased, the lifetime of the TiO_2 filter is obviously prolonged.

阐述了研磨、离心、静置、过滤等TiO2调制过程优化后，产品中凝聚粒子含量明显下降，二氧化钛过滤器使用周期明显延长。

In this thesis, we described a method used hydrothermal treatment to prepare pure nanocrystalline CdS, and also studied the effect of pre reaction material to the particle size and shape of the product.

本文给出了用水热技术制备CdS纳米粉的方法，并研究了采用不同的反应前驱物对产物粒度、形状的影响。

Having been trial-produced several times, this new product will be put into mass production. Experiment on the Production Technology of Cotton Stalk& Wood Composite Particle Board

这种新产品经过几次试制，将投入成批生产。棉杆/木材复合碎料板生产工艺试验

Particle classification is usually used to obtain qualified powder product after mill process. Modern industry demand more and more for fine particle size and narrow size distribution.

在微细粒级粉体加工技术中，颗粒分级是得到合格粒度产品的关键步骤，现代工业对细粒度、窄级别提出了越来越高的要求。

The crystal phase, particle morphology, surface area and content of sodium oxide in the nano ATH product were characterized by XRD, TEM, BET and elemental analysis using a sequential plasma emission spectrometer.

采用TEM、XRD、BET和连续等离子光谱分析仪（SPS）对产品的形貌、粒度、晶型、比表面积、钠离子含量进行了分析表征。

Exhaust of antifoaming performance of modified products is related with particle size of modified product become bigger during the course of test, also related with the change of surface tension of foaming medium before and after the breaking foam performance test.

改性产物的性能衰减与其在消泡过程中粒径变大和分散状态以及起泡介质表面张力升高等因素有关。

With high alumina cement and floating particle as main starting material, a new unfired floating particle insulating refractory product has been developed.

以高铝水泥和漂珠为主要原料.研制出一种新型不烧漂珠隔热耐火制品。

The spherical powder product is obtained with particle size about 0.05 μ m and well-distributed, excellent flowability and suitable for preparation of ITO target material with high density.

产品平均粒径0.05μm左右，颗粒为球形，分布较均匀，流动性好，适于制备高密度的ITO靶材。

the product prepared by lithium acetate has smaller particle size and lower crystallinity. in contrast, the cathode material prepared by lithium hydroxide possesses higher crystallinity and better electrochemical performance.

乙酸锂制备的材料粒径较小，结晶度较差；氢氧化锂制备的正极材料具有较高的结晶度，进而表现出更优的电化学性能。

The particle size of the product presents perfect normal distribution.

连续种分产品的粒度呈较完整的正态分布。

As a preliminary work, fast pyrolysis and steam gasification of biomass were studied in a free fall reactor. Effects of reactor temperature, particle size, fuel type and S/ B ratio ( steam to biomass mass ratio) on product distribution were investigated.

本论文用落下床反应器研究生物质快速热解和水蒸汽气化特性，考察了原料、粒度、温度、S／B比（水蒸汽与生物质进料质量比）等对产品分布的影响。

The conclusions are: Standing petroleum coke grinding mill needs no any maintenance, but has long service life, lower noise-making, simple technical process, less energy consumption, stable distribution of fine particle of finished product and high productivity.

结论是，立式研磨机研磨元件不需要任何维护，使用寿命长，噪音较低，工艺流程简单，能耗较低，成品细度分布比较稳定，生产效率高。

well, in physics, momentum is a vector, and it is a product between the mass of a particle and its velocity.

物理中，动量是矢量，它产生于，由粒子的质量与速度。

angular momentum: the vector product of the position vector (from a reference point) and the linear momentum of a particle.

角动量：（有参照点）的矢量和粒子线性动量的向量积。

well, in physics, momentum is a vector, and it is a product between the mass of a particle and its velocity.

物理中，动量是矢量，它产生于，由粒子的质量与速度。