program interrupt的例句大全

The software structure including main program interrupt subroutine flow chart was provided.

最后给出了控制系统软件结构框图，包括主程序和中断程序。

The application of multi-interrupt brings much convenience to design program and makes the processing time of program meet the requirement of the fast excitation control system of generator's responding to signal.

多个中断的嵌套调用，为程序的设计带来了极大方便，使各种服务程序的执行时间满足快速发电机励磁控制系统对信号响应时间的要求。

The main program and interrupt service routine ( ISR) are realized by using modularized software design method.

软件采用模块化软件设计的方法设计了控制系统主程序、中断服务程序及中断服务子程序。

And the SCM software system is composed of main program, serial interrupt service program, data transform subprogram, timer interrupt service program and pulse output subprogram.

下位机软件系统主要由主程序、串行中断服务程序、数据转换子程序、定时器中断服务程序和脉冲输出子程序构成。

MCU program structure divides into two parts as main program and timer interrupt service program, after many times' testing and running, the program runs steadily and reliably.

单片机程序结构分主程序和定时器中断服务程序两个部分，经过反复试验运行，程序运行稳定可靠。

It gives the flow charts of main program, the AD sampling, generate reference sine wave, the timer interrupt of the SPWM and does related experiments.

在软件方面，给出了主程序、AD采样、产生基准正弦波、定时器中断产生SPWM的软件流程图，并进行相关的实验。

In the aspect of software designing, the main program and timer interrupt subprogram as well as module subprograms are designed, the module algorithms are explained detailedly.

在软件设计方面，设计了主程序和定时器中断子程序及各模块子程序，并对各部分算法进行了详细说明。

The key modules are as follows: the main program, timer interrupt initialization subroutine, AD initialization subroutine, DMA interrupt subroutine and signal preprocessing subroutine.

给出了完整的软件设计，主要模块有：主程序设计、定时器中断子程序、A/D初始化子程序、DMA中断子程序和信号预处理子程序。

Software design, including SCI communication interrupt service subprogram, capture interrupt service subprogram, Timer interrupt subprogram, A/ D acquisition subprogram, consulting service program, and signal process subprogram.

系统软件设计，包括SCI通信中断子程序、捕捉中断子程序、定时器中断服务和A/D采样子程序、系统查询服务程序，以及采样数据最终的处理子程序等。

Among them, main program is in charge of initialization and key-display processing, timer interrupt service routine, is designed to implement vector control algorithm, three close-loop regulators and the generation of SVPWM signals as core program.

主程序负责初始化和键显处理，定时器中断服务程序作为核心程序实现矢量控制算法、三闭环调节器设计和SVPWM信号发生，AD转换中断服务程序为系统保护功能提供基础之一。

Control system software of upper PC was compiled with VB6.0, system program of the intelligent traffic signal machine was compiled with assemble language, timing interrupt service routine was partitioned into 100ms, 0.5s and 1s program segment.

上位机控制系统软件用VB6.0编程，信号机系统程序用汇编语言编写，其定时中断处理程序分为100ms，0.5s和1s程序段。

Being different from the existing measurement method for A/ V delay, the system does not produce random noise to interfere audio test, and does not need video test signal to interrupt live program.

与现有测定A/V延时的方法不同，它不存在干扰音频测试的随机噪声，也不需要中断实际节目的视频测试信号。

The hard real-time serial receiving program which dealt with totally four different data frames was designed with four techniques: data frame picking-up in interrupt serve program, finite state machine theory, buffer sharing and code optimizing.

运用中断服务程序就地帧识别、有限状态机、缓存共用和代码优化技术，设计了具有多通讯协议的强实时性串行通讯接收程序。

Analysis and design of the driving power of the main control program and the interrupt service routine.

分析并设计了驱动电源的主控制程序及中断服务程序。

The DSP control software is roughly divided into main program, timer interrupt service routine and AD conversion interrupt service routine.

DSP控制软件主要分主程序、定时器中断服务程序和AD转换中断服务程序。

According to structured programming, the software of the lower machine is composed by the main program, the subroutine and interrupt service routine.

按照结构化编程思想，将下位机软件划分为主程序、子程序和中断程序三部分分别进行设计。

The module software is a front and back office system. Namely the front system completes interrupt service routine while the background system completes the task-level program.

模块软件采用前后台系统，即前台完成中断服务程序，后台完成任务级程序。

Modular construction is adopted in the software system design. It is chiefly composed of main program, interrupt service routine, and several functioning modular subprogram.

软件系统的设计采用模块化结构，主要由主程序、中断服务程序和若干功能模块子程序组成。

Then there is a discussion of the architecture of the interrupt service routine designing for the real-time system. A basic scheme which can be followed for the program designing has been supplied.

然后对实时系统的中断服务程序设计的结构进行了探讨，为具体的程序设计提出了可遵循的基本框架。

According to the hardware scheme of control system, the software realization scheme is given, which includes: the design flow chart of harmonic separating algorithm, the main program and its interrupt service routine.

根据控制系统的硬件设计，确定了软件实现方案，给出了主程序及其中断服务程序、谐波分离算法程序的设计流程图。