pulse laser system的例句大全

After simulation of MATLAB proof method is feasible, and carries on test to digitized pulse laser signal processing system, receives the good results.

经MATLAB仿真证明方法可行，并对数字化脉冲激光信号处理系统进行实验测试，收到良好效果。

Optimized design of a system of generating terawatt laser pulses by use of optical parametric chirped pulse amplification

用光学参量啁啾脉冲放大技术产生TW级激光脉冲系统的最优化设计

The configuration and principle of the system to measure the pulse width and the power time history of a multiplex beam laser are introduced, and the mathematic analyses of the probable nonlinear effect and pulse broadening are also given.

介绍了一种多路激光束的脉宽和功率变化测量系统的构成和工作原理，并给出了系统可能出现的非线性效应和脉冲展宽的数值分析。

Multi-pulses CARS needs to adjust the delay time of probe pulse to obtain time-resolved spectroscopy, and relatively long detection time. Thus, it is requirement on laser system and molecular long term stability.

多脉冲CARS需要调节探测光的时间延迟得到时间分辨光谱，探测时间相对较长，并且对激光系统和待测样品的稳定性要求较高。

The availability of multi-cycle driven pulse for producing single attosecond pulse significantly looses the requirement of laser system in experiment. A high-power mid-infrared laser source employing dual-chirped optical parametric amplification scheme based on Ti: sapphire laser system is proposed.

多光周期的驱动脉冲可用于产生单个阿秒脉冲将大大降低实验上对激光系统的苛刻要求。提出一种基于掺钛蓝宝石激光系统的双重啁啾光参量放大方案用于产生高功率中红外激光光源。

we develop the seed cw laser source by using the ring dye laser pumped by a diode semiconductor laser, the absolute laser frequency locking and automatic tracing system, three frequency laser generator, pulse dye amplifier, auto-aligning system.

发射机部分：采用半导体激光器泵浦环形染料激光器作为系统种子激光光源，研制了激光频率绝对锁定跟踪系统、三频激光产生器、脉冲染料放大激光器、自动准直系统等。

The cooperative object for laser system is a plane mirror placed at a remote position. The light pulse of light source transmitting and signal sampling are controlled by a microcomputer system.

激光系统的合作目标为远处一平面镜，光源发射光脉冲和信号采集由微机系统控制。

Comparison of the Two Optical Scanning Paths in a Laser Pulse Forming System by a Pair of Electro-optic Deflectors

利用电光偏转器进行激光脉冲整形的两种扫描光路的比较

The working principle and photoelectricity characteristics of the pulse laser range system are introduced.

简要介绍了脉冲激光测距的工作原理及其光电特性。

Research of the Distributed Digital Delay Pulse Generator in the Prototype of Laser System

激光打靶装置中的集散式数字同步系统的研究

The strong electromagnetic interference generated in high power TEA CO2 laser system mainly comes from the main discharge circuit, pulse spark switch and power supply.

大功率TEA CO2激光器系统产生的强电磁干扰主要来源于激光器主放电回路、脉冲火花开关和电源。

Power supply system provides flash energy to Xe lamp. Pumping of Nd: KGW laser rod is provided by Xe lamp. Pulse solid laser power directly affects the attribute of laser.

脉冲固体激光电源为氙灯提供能量，氙灯是激光的泵浦源，它燃烧发光激发工作物质Nd：KGW产生激光，因此激光电源的性能直接影响到激光光束的质量。

The broadening effect of ultrashort laser pulse due to optical components is theoretically calculated and a Z scan system with small internal dispersion based on Al coated mirrors is reported.

本文在理论上计算了超短激光脉冲经过光学部件的展宽效应并实际给出了一种基于镀铝反射镜的小色散Z-扫描测量系统，同时也对实验中的其他重要参数进行了讨论。

Femtosecond laser pulse control of multidimensional vibrational dynamics:(ⅰ) the three vibrational mode two electronic state system

飞秒激光控制的分子量子动力学研究：（Ⅰ）三维二能级系统

This paper presents a method of applying the simple chip microprocessor 8751, together with laser and pulse control techniques to form an automatic control system in the production process of the electric wire and other wires.

本文介绍的自控系统以8751单片机为核心，结合精密光学、脉冲控制等新技术，对电线及其它线材生产过程实现实时检测和自动控制，可使线材产品直径均匀，损耗降低，提高质量。

Then the factors of accuracy and the requirements of the emission module are analyzed. A specific laser diode with integrated MOSFET and capacitor and a dedicated driver chip are used in the system to output high-quality laser pulse as the ranging signal.

文章首先分析了激光脉冲发射系统对测距精度的影响因素和对发射模块的要求后，系统采用专用集成MOSFET和电容的激光二极管和专用的驱动芯片产生高质量的激光脉冲作为测距信号。

Through solving the rate equation of four level energy system, the result that the response time of Nd: YAG laser pumped by xenon lamp is proportional to the pump intensity of light sources is calculated by taking ideal rectangular pulse light source as pump light source.

通过求解四能级系统速率方程，计算出以理想的矩型脉冲光源做为泵浦光源，氙灯泵浦的Nd：YAG激光器响应时间与光源泵浦强度成正比。

This paper describes an intelligent background Light detecting system which is consisted of an optical detector and a micro-controller, we can measure the intensity of the background and separate it from Laser pulse by means of the intelligent technology.

本文论述了一个智能化的背景光的测试系统。它由一个光电探测器和一个微处理器组成，通过测试背景光的强度，利用智能化技术把它从激光脉冲中分离出来。

a new embedding control system of medical long pulse laser control was introduced in this thesis.

本文的研究内容是医用激光器的嵌入式控制设计。

a signal processing system for a pulse laser fuze based on cpld

基于CPLD的脉冲激光引信信号处理系统