radius tool的例句大全

It was found that metallic wall and fold-in appear only when thick sheet is processed with small radius tool. And after their appearance, their intensity increases as the wall angle, step size and yield stress increases.

结果发现挤出飞边和向内褶皱在使用小工具头加工厚板的时候容易出现，其程度随成形角、加工步长和屈服应力的增长而增大。

Program examination: The system examines the NC program taking the continual character excepting space as the unit, and process the cutting tool radius compensation if necessary.

程序识别：将指令分为基本指令和扩展指令，以两个相邻空格间的连续字符串为单位检测数控加工原程序，识别数控指令，实现刀具半径补偿算法的模块化，可移植性好。

A 3D mechanical cutting force model is proposed based on the shear and slip-line field method, in which the tool edge radius and elastic restitution in the ploughing field are taken into consideration.

本文基于剪切-滑移线场理论建立了二维振动辅助微铣削的三维切削力模型，模型中考虑了切削刃钝圆半径及耕犁和弹性恢复对微细切削力的影响。

Analysis the Radius Compensation in Round Turning Tool

圆头车刀的半径补偿分析

The slotting tool with isometric profile cylinder hole is designed. The average radius, the rake angle, the relief angle and the space curve of the edge are analyzed and researched.

对插削等距型面孔的插刀进行了设计，对其平均半径、前角、后角、刀刃的空间曲线作了分析和研究。

The code of tool radius compensation in the NC Program

数控编程时巧用刀具半径补偿指令

Ingenious Application of Tool Radius Compensation in FANUC System

巧用FANUC系统的刀具半径补偿功能

Application of Tool Corner Radius Compensation in NC Turning

刀尖圆弧半径补偿在数控车削中的应用

Offect of Corner Radius of Lathe Tool in NC Turning Chinese Corner

数控车削中的刀尖半径补偿

The results indicate that the cutting corner radius is lesser, the tool is sharper, but it wears out quickly and makes the cutting force increases.

结果表明，刀刃钝圆半径越小，刀尖越锋利，但是磨损较快，切削力很快增加。

When manufacturing the part surfaces of cone or arc by CNC lathe, it causes more or less cutting because of the existence of the corner radius of lathe tool.

在数控车削加工含有圆锥或圆弧面的零件时，刀尖圆弧会造成零件过切或少切现象。

In this paper, the geometric model which was used to consider corner radius, feed per tooth, cutting speed, number of teeth and difference of height of tool nose was, developed.

从几何上考虑了刀尖圆弧半径、每齿进给量、切削速度、铣刀刀齿数、刀片刀尖高度差等因素对表面形成的影响，并建立了其几何模型的数学公式。

Select eraser tool and using a feathered big radius brush settings, click at the center of the eye lid.

使用橡皮擦工具并选择大半径羽化刷子。在眼球的中心点击一下。

The algorithm of tool radius compensation in simulation software should be identical with that in the real NC system.

要保证数控加工模拟与数控系统的结果一致，就要求模拟系统的刀具半径补偿算法与实际数控系统中的算法一致。

The TPMM ( Tool Presetting and Measuring Machine) is used to preset tools by measuring the cutting point coordinates, angles, radius parameters of tools.

刀具预调测量仪（对刀仪）是通过测量刀具的切削点位置、角度和圆弧半径等参数，对刀具进行预调整的测量仪器。

Case Analysis of Tool Radius Compensation in Compound Fixed Cycle of FANUC Lathe

FANUC车床复合固定循环中刀具半径补偿作用的实例分析

Error Analysis Caused of CNC Lathe Tool Nose Radius

数控车刀刀尖圆弧半径引起的误差分析

Implementation Tool Radius Compensation includes three steps: the establishment of Tool Radius Compensation, the carry out of Tool Radius Compensation, the cancellation of Tool Radius Compensation.

实现刀具半径补偿功能包括三个步骤：刀补的建立、刀补的进行、刀补的取消；

The effect of relevant process parameters, namely tool radius, sheet thickness, step size, wall angle, yield stress and hardening exponent, upon their intensity was statistically analyzed.

对工具头半径、板厚、加工步长、成形角、屈服应力和加工硬化指数等参数对成形缺陷的影响程度做了计算。

In order to avoid such a failure, an empirical model in terms of four process parameters, namely sheet thickness, step size, wall angle and yield stress, was developed to compute the minimum safe limit of tool radius.

为了避免这种失效，本论文中提出了一个以板厚、加工步长、成形角和屈服应力为变量的经验公式，以计算工具头半径的最小值。