rate the process的例句大全

The rate-limiting step of the method is an anaerobic treatment process. Recent studies showed that redox mediators could effectively accelerate the process.

此方法的限制步骤为厌氧处理阶段，而氧化还原介体可以有效加速此过程，从而提高处理效率。

A COD removal efficiency of 80% and a decoloration rate of 100% could be obtained. The results suggests that te irradiation technology shall be a promising process for treatment of textile dye waste effluents.

结果表明，辐射技术能有效降解活性艳蓝染料，脱色效果十分理想，COD去除率可达80%以上。

In this paper, genetic algorithms are employed to recognize the dynamic parameters of crystalline process in supersaturated solutions of Li 2O+ B 2O 3 H 2O system. The recognized parameters are crystalline reaction rate, thermodynamic equilibrium concentration and apparent reaction order.

文章中将遗传算法应用于过饱和溶液Li2O·3B2O3&H2O体系结晶过程动力学参数辨识，确定了结晶反应速率常数、热力学平衡浓度和表观反应级数。

The concept of relative water loss rate is advanced to judge the degree which actual water loss is higher than theoretical water loss in the process of vacuum cooling.

提出相对失水率的概念，作为比较真空冷却过程中实际失水高于理论失水程度的判断依据。

The calculation of theoretical recovery rate of gold in CIP process

炭浆法提金工艺理论回收率计算

Theoretical Studies on Rate Constant for the Unimolecular Isomerization Process of Acetone Molecule

丙酮单分子异构化过程的动力学速率常数的理论研究

Based on this conclusion and the result of multiscale factor analysis, the process control system is divided into three independent control loop: the hot-end temperature control loop, the calcination control loop and the feed-rate control loop.

综合多尺度因子分析和煅烧控制模型的结论，把回转窑过程控制系统划分为三个独立回路：窑头温度控制子系统、煅烧控制子系统和进料量控制子系统。

The Effect of Non-equilibrium Relaxation Process of High-speed Nucleus in High Temperature Thermal Equilibrium Plasma on Fusion Reaction Rate Parameter

高速核在高温热平衡等离子体中的非平衡弛豫过程对热核反应率参数的影响

In this paper, the factors influencing hydrogen peroxide unhairing of cattle hide and the mechanism of the process were studied. The effects of hydrogen peroxide offer, pH value, temperature, float and added rate of hydrogen peroxide on efficiency of unhairing were investigated.

本论文以牛皮为原料皮，研究了过氧化氢用量、脱毛液pH值、脱毛液温度、液比及过氧化氢加入速度等因素的变化对过氧化氢脱毛效果的影响规律。

Using finite element analysis software ANSYS to simulate different temperature rise rate in the hot pressing process, determined the best placement of the magnetic abrasive.

本文在考虑上述工艺参数的基础上，利用有限元分析软件ANSYS对热压烧结过程中不同升温度速率下的模具温度场进行模拟分析，确定了模具的最佳升温速率。

The effects of foaming temperature, saturation pressure and shear rate on the cell morphology of foamed PLA in microcellular foaming process of supercritical CO2/ PLA were investigated.

研究了超临界CO2/PLA微孔发泡过程中，发泡温度、饱和压力、剪切速率对聚合物PLA泡孔形态的影响。

At the first, this part distinguishes between the temporal method and the current rate method in accounting process. Subsequently this part evaluates two methods by the accounting theories and the economic theories.

首先对时态法与现行汇率法的会计处理进行辨析，继而从会计学理论和经济学理论两方面对时态法和现行汇率法进行评价。

The results show that the critical temperature of cultured olive flounder is-0.70, and the temperature, temporary culture time, oxygen supply and descend rate of temperature are the main influence factors upon the process.

结果表明：人工养殖牙鲆的临界温度为－0.7～0℃；温度、暂养时间、梯度降温速率、氧气的供应是影响牙鲆无水保活时间的主要因子；

In the etherification process of FCC gasoline, reaction temperature has considerable effect on the etherification conversion of tertiary carbon olefins, polymerization conversion of diene and sulfonic shedding rate.

在催化裂化轻汽油醚化过程中，反应温度对叔碳烯烃醚化转化率、二烯烃聚合转化率以及阳离子交换树脂催化剂的脱磺速率有较大的影响。

To achieve the optimal economic growth rate, financial function should gradually abandon policy function, actively perform its economic function, and in this process, financial institution should take corresponding adjustment too.

为了更好的促进经济增长，金融功能必须逐渐摒弃其政策功能，充分发挥其经济功能，同时随着金融功能要求的转变，相应的金融制度也必须做出适应性调整。

It is of important to provide a suitable environment for the growth of thermophilic microorganism, during the first period of the static composting process, add to the aeration rate and the turning frequency to increase active microorganism and improve the quality of composting product.

建议在静态一次堆肥发酵周期中，增加通气量和翻堆频率，有利于增强微生物菌群的活力和提高堆肥质量。

Based on the results, the process calculation of thin film evaporator was realized by synthetically considering the optimum feed rate derived from CFD simulation.

以此为基础，综合考虑CFD数值模拟得出的最佳进料量要求，实现薄膜蒸发器的工艺计算。

In this paper, the four-energy-level coupling transition is calculated by means of the matrix equation, the result is obtained that the probability of the absorbing process of the three-photon and the cube of the intensity are in the direct rate;

本文应用密度矩阵方程对四能级耦合跃迁进行了计算，得出了三光子吸收过程所占的几率与光强的三次方成正比的具体结果；

The effects of three process parameters, diameter of throat, pressure drop and aeration level, on the laying off rate of the distributor are discussed as well as the interaction relationship between the process parameters.

本文讨论了流化分配器的三个工艺参数（喉口直径、压力差及充气量）对其下料速度的影响，以及各工艺参数间的相互作用关系。

The miniature VPSA purge-to-product process was studied by experiments and the effects of operating parameters, such as purge-to-product, resistance of throttle, product flow rate on the product ( purity) were investigated.

对微型VPSA制氧反吹流程进行了实验研究，探讨了反吹气量、节流阻力、产品气量对产品气纯度的影响规律。