refining slag的例句大全

And some decompound production of foaming agent can reinforce the foaming ability of refining slag.

发泡剂分解后部分产物作为高熔点粒子存在于熔渣中，提高了精炼渣的泡沫化性能。

Compared in the trial production, both the foaming performance and desulphurizing ability of optimizing LF refining slag were superior to the slag current using.

通过生产试验对比表明，经优化的LF炉精炼渣，其发泡埋弧效果、脱硫能力都优于现用渣系。

Refining slag is the key in the production of LF CaO-SiO_2-Al_2O_3-MgO-CaF_2 and CaO-Al_2O_3 are the usual refining.

常用的精炼渣系有CaO-SiO2-Al2O3-MgO-CaF2五元渣系和CaO-Al2O3渣系等。

Progress in studies on refining slag resistance of mgo-Cao materials

镁钙材料抗精炼渣性能研究进展

resistance of mgo-cao unburned brick to refining slag

不烧镁钙砖的抗精炼炉渣侵蚀性能

In the production process of tire cord steel, total oxygen and inclusion composition is controlled by using Si-Mn alloy and changing refining slag. The inclusion morphology is improved greatly.

在帘线钢的生产中，通过采用Si-Mn合金终脱氧以及改变精炼渣系，达到控制钢中酸溶铝含量，进而控制钢中夹杂物组成的目的，改善了夹杂物形态；

Semicommercial Experiment of Foaming Behavior of LF Refining Slag

LF精炼渣泡沫化半工业性试验

Effect of CaO-CaF_2 on fusibility of LATS refining slag

CaO-CaF2对LATS精炼渣熔化性能的影响

Effect of Modifying Agent on Melting Point and Desulphurizing Capacity of LATS Refining Slag

调质剂对LATS精炼渣熔点与脱硫能力的影响

Study on arc submerging refining slag for ladle furnace

LF埋弧精炼渣的研究

According to different ratio of raw materials for the refining of molten slag and steel temperature measurement balance test, analyzed and discussed refining slag basicity and components of the refining slag and steel melting temperature of inclusions morphology in the same Si 、 Mn deoxidization conditions.

按不同的原料配比进行了精炼渣的熔化温度测定和钢渣平衡试验，在相同的Si、Mn脱氧条件下，分析讨论了精炼渣碱度和组分对精炼渣熔化温度和钢中夹杂物形态的影响。

As desulphurization speed was quick by using S1 slag therefore the refining time decreased.

S1渣的脱硫速度快，从而缩短了精炼时间。

The results showed that the tested top slag+ wire feeding slag had high sulphur capacity ( logC S being-1.6~ 0.5) which were available for desulphurization of ultra-low sulphur steel during refining;

结果表明，该顶渣+喂线渣具有高的硫容量（logCS为-1.6～0.5），适用于超低硫钢的精炼脱硫；

A Study on Vacuum Refining Ultra-Low S and Low P Medium-Carbon Steel with CaO-Based Premelting Slag

石灰基预熔渣真空精炼超低硫低磷中碳钢的试验研究

the influences of using synthetic slag during tapping on converters on ladle furnace refining are described.

详细论述了转炉出钢过程采用合成渣洗工艺对炉外精炼工艺的影响.

Top-slag refining process in CAS-OB unit under inert gas protection is introduced.

介绍了利用CAS-OB装置在惰性气体保护下进行顶渣精炼工艺过程。

Application of Top-Slag Refining in Inert Gas Protecting

惰性气体保护下顶渣精炼的应用

Effect of Additives on Viscosity of LATS Refining Ladle Slag

改质剂对LATS精炼钢包渣粘度的影响

To avoid slag sticking onto the ladle immersion cover during LATS refining process, B_2O_3-CaO and CaF_2-CaO were employed as modifiers which was added to the ladle slags respectively.

为减少LATS合金化精炼浸渍罩粘渣，分别采用B2O3-CaO和CaF2-CaO作调质剂对钢包渣进行调质处理实验。

Research on the slag-metal sulfur partition and the kinetics equation of desulfurization in LF refining process

LF精炼过程中硫分配比和脱硫动力学方程研究