reliability of design的例句大全

the method was utilized in lightweight design of a certain vehicle successfully. 4. a design model of thin-walled beam for lightweight optimization was established based on the reliability of design theory.

建立了基于可靠性设计理论的汽车薄壁纵梁轻量化优化设计模型。

A calculation method for reliability of design parameters of tank, such as load, dimension, material property, was proposed.

提出了储罐系统可靠性设计参数（载荷、结构尺寸、材料性能）的计算方法。

The reliability model of task based has a directive effect on both task division and topology selection in the phase of avionics system design.

基于任务的可靠性建模和计算方法在航电系统设计阶段对于任务划分和拓扑选择都将起到指导作用。

Reliability Design of Constant Speed Universal Joint Transmission Shafts

等速万向节传动轴的可靠性设计

In this paper, by using reliability design methods, the test pressure of ultrahigh cylinder is studied. It is analyzed what the fixed quantity relation of test pressure with influencing factor.

应用可靠性设计方法，对超高压圆筒耐压试验压力进行探讨，定量分析试验压力与影响因素之间的关系。

The results show that this system is effective for studying the reliability test of electromagnetic relay to provide test reference for reliability design of aerospace electromagnetic relay.

结果表明，该系统对研究电磁继电器可靠性测试的有效性，为航天电磁继电器的可靠性设计提供了试验依据。

Methods of reliability design for an ATS test software

一个ATS测试软件的可靠性设计

The reliability design is carried out for the telescopic boom system of a 25t wheel crane.

对25t轮胎起重机伸缩吊臂系统进行了可靠性设计。

The needs for space environment design reliability, space environment test and space environment indemnification of space vehicle must be emphasized.

为了减少空间环境对航天器的影响作用，必须重视航天器的空间环境可靠性设计、空间环境试验以及空间环境保障。

The third part is based on the second part of the questionnaire to test validity and reliability, and make sure the validity of study design. Meanwhile, test the hypotheses which is proposed in the second part.

第三部分主要是根据第二部分问卷搜集到的数据进行效度和信度检验，以确定研究设计的有效性，同时对第二部提出的研究假设进行验证。

The core of the control system is composed of FPGA and the design method of designing software with hardware. Because the testing control is completely fulfilled by the hardware, it can greatly improve the testing speed and the testing reliability.

系统的核心控制部分采用基于现场可编程门阵列（FPGA）的软硬件协同设计，测试控制完全由硬件实现，使测试可靠性和测试速度有大幅度的提高。

This article will introduce design theory, theoretical arithmetic of Characteristic Impedance and strict impedance controlling. These are used to ensure impedance matching and achieve PCB reliability to make the product be in a steady state.

本文从多层PCB板叠层的设计原理、特性阻抗的计算方法、严格的阻抗控制，来保证阻抗匹配，实现PCB的可靠性，使产品稳定的工作。

Secondly, the paper will establish the theoretical probability models of structural resistances and loads of highway bridges to analyze their dispersive laws and relevant statistical parameters, and gain the statistical information of structural resistances and loads that the structural reliability design and analysis of highway bridges need.

建立桥梁结构抗力和荷载作用（作用效应）理论概率模型，分析其分布规律和有关统计参数。解决桥梁结构可靠度设计和分析中所需要的作用（或荷载）效应的统计信息。

The results show that the reliability design theory of fatigue strength is a practical and effective method.

结果表明：可靠性强度设计理论是一种切实可行的方法。

Reliability design of telescopic boom system for a 25t wheel crane

25t轮胎起重机伸缩吊臂系统可靠性设计

Applying the reliability design theory the initial reliability for critical buckling strength of steel thin-wall cylinder was analyzed in case of maintaining outer pressure test; the scope of initial reliability was discussed under different operating conditions.

应用可靠性设计理论，分析了在保持外压差试验时钢制薄壁圆筒临界失稳强度的初始可靠度，讨论了不同工况下初始可靠度的范围。

The Design Of Distributed Intelligent Temperature Measurement System with High Reliability

高可靠分布式智能测温系统设计

The tendency and method to decrease the seismic response of the total structure on the basis of keeping the reliability of the original structure has been proved. Some experimental evidence for future design and optimizing control of the external frame storey increasing structure is provided.

验证了一种在保证原结构可靠性的基础上，降低整体结构地震响应的方向和方法，也为采用外套框架增层结构的未来设计和优化控制提供了一定的依据。

Research on Theories of Reliability Design of Straight Side Combined Frame's Tension Rod

闭式组合机身拉紧螺栓的可靠性设计理论研究

Reliability of a structure is expressed in term of probability value not exceeding a given bound value of ductility ratio and a design method based on the reliability of structure is proposed.

文中用结构的延伸率不大于某一极限值的概率表示结构抗震的可靠度，提出了一个根据对结构抗震可靠度的要求设计抗震结构的方法。