resin的例句大全

China should make the best of resource advantage and solve the problems of technical development, scale production, widening application fields so as to develop petroleum resin and modified petroleum resin industry.

我国应充分利用资源优势，解决技术开发、规模化生产、拓展应用领域的问题，以发展石油树脂及改性石油树脂行业。

resin bonded waterproof abrasive paper, electric coated

树脂型碳化硅水砂纸

Now the main method is to optimize the process conditions preferably by the specific experiments to examine the resin purification of each step of the active ingredient. The experiments aim at the specific separation objects, and did through regarded the measured target composition as an indicator.

并且研究思路基本集中在针对具体的分离对象，以测得的目标成分得率或含量为指标，设计具体实验考察树脂纯化各步骤对有效成分的影响，从而优选出最佳的工艺条件。

Based on the requirements of processability and mechanical properties for cable application, the target properties of the resin, technical route and reaction conditions were determined.

根据电线电缆应用对树脂加工和机械性能的要求，确定了产品指标和生产技术路线及反应条件。

Technical Trial of the Cold Hardening Resin Sand in the Casting of Magnesium Alloy

用冷硬树脂砂试制镁合金铸型的工艺尝试

Discussion on synthetic technicology of propanetriol epoxy resin

丙三醇环氧树脂合成工艺探讨

Study on polyacrylate rubber modified ethoxyline resin heat-resisted adhesive

聚丙烯酸酯橡胶改性环氧树脂耐热胶粘剂研究

Toughening the ethoxyline resin with polyurethane elastomer is an important method to compensate for the defects of ethoxyline resin, such as fragile texture and weak toughness after the thermofixation.

利用聚氨酯弹性体对环氧树脂进行增韧处理是弥补环氧树脂固化后质脆，韧性较差等缺陷的重要方法之一。

Studies on Purification Technique of Tea Saponin by Macroporous Resin

采用大孔树脂法纯化油茶皂苷的工艺条件

The tear strength and abrasion resistance of NR/ SBR vulcanizates were improved by joining the reinforcing resin AD-1600, reinforcing resin OD-60 and 10 phr TPI.

通过加入补强树脂AD-1600、补强树脂OD-60和10份TPI均可提高NR/SBR硫化胶的撕裂强度、耐磨耗性。

The film made of metallocene polyethylene resin possessed good transparence and exhibited superior dart impact strength and tear strength.

用所得茂金属聚乙烯树脂加工成的薄膜具有较好的透明性，并表现出了优异的落镖冲击强度和撕裂强度。

Ultrastructural study on development of needle resin ducts in Pinus elliottii engel.

湿地松针叶树脂道发育的超微结构研究。

Influence of Different Heat Treatment Modes and Technical Operation on Candida Albicans Adherence to the Surface of Heat-curing Resin Base

不同热处理方式及技工操作对树脂基托表面白色念珠菌黏附的影响

To improve Technical Process of PTFE Resin Fined Powder

聚四氟乙烯树脂细粒模压粉生产工艺改进

Thin section preparation for loose rock and soil materials using epoxy resin

利用环氧树脂制备松散岩石及土壤薄片的方法

The scale up test for the synthesis of melamine melocol resin was accomplished on the basis of the technological conditions adopted in the former pilot test.

以密胺-脲甲醛树脂合成的小试工艺条件为依据，完成了放大试验过程的工艺研究。

Under different test temperature, modification effect of Epoxy resin and its content was judged upon viscous-elastic characters of asphalt mixtures.

在不同的试验温度下，考察了环氧树脂及其用量对沥青混合料粘弹特性的影响效果。

Improvement on testing method for liquid phenolic resin viscosity

改进酚醛树脂液的粘度测量

Flame retardant vinyl ester resin using tetrabromo bisphenol A, epichlorohydrin, acrylic acid as raw materials was also synthesized, Its flame retardant property was excellent.

用四溴双酚A、环氧氯丙烷和丙烯酸为原料合成了阻燃型乙烯基酯树脂，其阻燃性能良好。

At the presence or catalyst, the synthesis process of epoxy ester from tetrabromobisphenol a epoxy resin and oleic acid has been reported.

介绍了在催化剂存在下从四溴双酚A环氧树脂和油酸合成环氧酯的过程。