rigid model的例句大全

Rigid model for transient flow in pressurized pipe system containing trapped air mass

水流冲击管道内滞留气团的刚性数学模型

Study on the Rigid Model& Visualization of Virtual Conical Thread Gauge

虚拟圆锥螺纹量规刚性模型及其可视化的研究

compared the results of calculation with the test and the pile-soil-pier foundation model with the rigid model; it shows that the results are consistent with the test results, and the maximum difference is less than 12.28%.

并把计算结果与试验结果以及桩-土-槽墩模型结果与刚性地基模型结果进行比较，表明计算结果与试验结果基本吻合，两者相差最大为12.28%。

the dynamic characters ( natural frequencies and critical damping ratio) are also given by experimental research. it is shown that the analytical results are reliable and the rigid model is a feasible method for the pulsed reactor core structure-like.

动态特性实验研究表明，分析结果是可靠的，采用刚体模型处理脉冲堆堆芯结构这种类型的结构是一种行之有效的方法。

The principle of motor must be lucubrated. Therefore this thesis makes researches on the stator and rotor coupling rigid model when the generator starts up in frequency conversion. The results can provide theoretical reference to the design of generator.

本文针对变频启动时，电机在电磁激发的定转子耦合刚体模型的振动进行了理论的研究，为电机的可靠性设计提供了理论的参考。

Chapter 2: Set up a set of models about small transient condition including rigid model including stability and regulation quality and stretch model including pane figure of regulation quality applying to the system of hydropower station with surge tank of many units sharing in one tailrace tunnel.

第2章，建立有调压室的多机一洞水电站小波动的计算模型，包括刚性水击稳定域和调节品质模型及弹性水击调节品质模型方框图。

Rigid model of transient analysis for multiple-characteristic long pipelines with trapped air mass

变特性长管道内水流冲击气团的刚性数学模型

for general multi-rigid model system, only the locomotion parameter of the components with large rigidness and regular shape could be represented.

一般的多刚体系统模型，比较适合于反映构件刚度较大的机构的运动与动力参数。

Research methods: This paper analyzes the skew frame with 2D rigid frame and 3D space model of thick plate element with MIDAS Civil structure design system, and their results have been contrasted with comparison method.

研究方法：运用MIDAS有限元分析软件，分别建立厚板单元的三维空间模型和平面刚架的二维平面模型对某斜交框架桥进行分析，并采用对比法对2种模型结果进行对比。

A three-dimensional rigid body model is used to study the landing of a helicopter in autorotation.

首先，建立了一个描述直升机自转着陆飞行动力学特性的三维刚性体模型。

In the upsetting technology theory, a tension stress theory of a rigid-plastic mechanical model and a shearing stress theory of a hydraulic stress mechanical model are proposed for upsetting a cylinder between flat platens, and a new type technology for upsetting between cone-platens is advanced.

在镦粗工艺理论方面，提出了圆柱体镦粗的刚塑性力学模型的拉应力理论和静水应力力学模型的切应力理论，设计了锥形板镦粗的新工艺。

Discussion on the structural vibration model and rigid matrix of elastic-plastic time history analysis

弹塑性时程分析中结构的振动模型及刚度矩阵

Wind tunnel test of a rigid flat-roof model is carried out, in which the time-varying generalized force is obtained in terms of simultaneously measured fluctuating wind pressures and structural modes to consider the correlation of random wind loading.

对一平顶屋盖刚体模型进行了风洞试验，考虑到随机风荷载的空间相关性，试验中利用同步测量的脉动风压和结构模态获得随时间变化的广义力。

The deformable and rupturable block model is given for 3D distinct element method based on the rigid block model ( plane to plane contact types).

在三维离散元面-面接触刚性块体单元模型基础上，提出块体单元允许变形、断裂的一种计算模型。

Research on tension stress theory of a rigid plastic mechanical model by optical plastics

用光塑法研究刚塑性力学模型拉应力理论

A issues about the orbital modeling of three bodies which are based on ideal rigid body. And therefore give rise to a integrate numerical method of three body problem. The gravity convergence of rigid body is studied based on rigid body model too.

本文讨论了基于理想模型三体轨道运动规律问题，并给出了一个完整的三体问题的数值解决方案；另外还研究了与引力有关的基于刚体模型的天体表面引力收敛问题。

Along with the development of CAE, many multi-rigid body dynamics software get extensive application. A virtual automobile model in side wind is build to offer swift and convenient method for studying the movement of automobile in side wind disturbance using ADAMS.

随着CAE的发展，多刚体动力学软件得到广泛的应用，本文用ADAMS建立了侧风作用下整车的虚拟样机，为研究侧风作用下汽车的运动提供了快捷和方便的方法。

The new theories include a tension stress theory of the rigid-plastic mechanical model when H/ D> 1 and a shearing stress theory of the hydrostatic stress mechanical model when H/ D < 1.

H/D

Motion simulation and study of road traffic accident based on multi-rigid-body pedestrian model system Simulation of the frontal car crash with dummy inside

基于多刚体假人模型的道路交通事故仿真研究含人体模型的轿车正面碰撞计算机仿真分析

Presents a space motion model ( SMM) of multiple rigid bodies with varying mass for the description of the intercept problem of homing missiles with roll stabilization.

已经发表的自寻的非滚转导弹拦截问题的数学模型往往是平面模型或空间质点模型。