rolling slab的例句大全

Small yard area and complex material flow problem of 1780 rolling slab yard have been solved.

解决了1780热轧板坯库面积小、物流复杂的问题.

On the basis of investigating influence of the technological parameter such as slab reheating process, furnace scale structure characteristics, scale removal times and rolling temperature variation on scale removal, the scale removal technical process rule was had developed and perfected.

通过研究热轧生产工艺过程的板坯加热、炉生氧化铁皮结构特点、除鳞道次、轧制温度变化等工艺参数对除鳞工艺的影响，制定、优化、完善了热轧板卷除鳞工艺制度。

Based upon the equations of tension in continuous rolling, a steady state mathematical model is established, and the variation of thickness and tension with variations of roll gap, roll speed, slab thickness and hardness calculated with an electronic computer.

本文以连轧张力公式为基础建立了稳态数学模型，在电子计算机上计算了分别改变辊缝、轧辊速度、坯料厚度和坯料硬度时，厚度和张力的变化值，即影响系数。

Under certain tension, the cold rolling efficiency of niobium was improved obviously. After three passes, the deformation rate of titanium slab reachs 62.5 percent and the shape of the strip is perfect.

经过反复的实验摸索，施加一定的张力，冷轧铌可以明显的提高轧制效率；钛板经过3个道次的轧制，变形率达到62.5%，而且板形良好，极大的提高了轧制效率。

The producing status of thin slab continuous casting and rolling in China

我国薄板坯连铸连轧工艺的生产现状

By the analysis of the deformation of metallic composite rolled products, a formula for calculating the thickness of covering slab for multilayer metallic composite rolling is derived.

通过对金属复合轧制的变形分析，导出了多层金属复合轧制的包覆板坯厚度计算公式。

Research and practice of Steel 20 produced by thin slab casting and rolling process

薄板坯连铸连轧流程生产20号钢的开发与实践

It is considered that medium thick slab or sheet billet should be adopted for various users' demands in continuous casting and continuous rolling of hot strip in VAI. It is introduced the characteristic of above technology and production line configuration in VAI.

VAI公司的热带钢连铸连轧基于不同考虑分别主张采用中厚板坯或者薄板坯，文中介绍了VAI的技术思想的特点和热带钢连铸连轧生产线配置方案。

Thin Slab Casting and Rolling Technology and Microstructure Property Controlling

薄板坯连铸连轧技术与钢的组织性能控制

Analysis on degree of continuation of thin slab Casting and rolling

薄板坯连铸连轧流程连续化程度的分析

Equipment optimization and investment of thin slab casting rolling in China

关于中国薄板坯连铸连轧的工艺装备优化和投资问题

Liquid core reduction technology for thin slab continuous casting and rolling

薄板坯连铸连轧的液芯压下技术

Development of Thin Slab Continuous Casting and Rolling Technology and Its Application at home

薄板坯连铸连轧技术的发展及其在我国的应用

A Study of the Cushioning Performance of CSP Technology for the Continuous Casting and Rolling of Thin Slab: Thermal Transfer Model of Straight Through Type Roller Hearth Furnace and Its Numerical Analysis

薄板坯连铸连轧CSP工艺缓冲性能的研究&直通式辊底炉传热模型及其数值分析

CSP technology is one of main production technologies for the continuous casting and rolling of thin slab, and the straight through type roller hearth furnace is used for heating and soaking slab and cushioning in the technology.

CSP工艺是薄板坯连铸连轧的主要生产工艺之一，直通式辊底炉在CSP工艺中起到加热、均热薄板坯和缓冲作用，是十分重要的热工设备。

Development of the Mass Flow Simulation System of Thin Slab Continuous Cas-ting and Rolling Process

薄板坯连铸连轧流程物流仿真系统的开发

For plate rolling mill, the influence of slab temperature, head end immersion at biting, use of AGC system, pressure sensor and broadening ratio on oversize in thickness of plate at head and tail ends is analyzed.

基于四辊中厚板轧机，分析了温度、头部沉入、AGC系统、压力传感器和展宽比对中厚板头尾厚度超差的影响。

The successful development of the high-velocity slit burner posts a technical guarantee for the applying of impact heating technology in continuous casting and direct rolling of steel in thin slab manufacturing process.

它的研制成功为冲击加热技术在薄板坯连铸连轧和直接轧制（HDR）中的应用提供了技术保证。薄板坯连铸连轧工艺的生产流程有别于传统工艺流程。

Allowable rolling pressure for small-flexibility slab edging

热轧立轧小柔度板坯允许轧制压力的研究和应用

Analysis and improve measure on surface crack of plate-milling in process of rolling CC slab

连铸板坯轧制的中厚板表面裂纹缺陷的分析及改善措施