rolling temperature的例句大全

The results show that trace Cr can enhance Cu Zn alloy hardness and recrystallized temperature in the way of precipitation hardening. Rapid heat rolling and quenching can hold the effects of working hardening, and thermomechanical treatment can develop structure hardening as well.

结果表明：微量Cr能提高Cu Zn合金硬度和再结晶温度，Cr对合金性能的影响是通过沉淀强化来实现的，快速热轧淬火具有保留加工强化的效果，形变热处理还产生了组织强化。

Rolling resistance is generated from hysteretic loss and friction loss when the tire rolling on the road, at the same time, the tire temperature is increased. This directly affects the life of tire and the energy consumption of vehicle.

轮胎滚动时的滞后损失及其与路面摩擦产生的损耗构成了轮胎的滚动阻力，同时损耗的能量以热的形式释放，使其工作温度上升，这直接影响轮胎的使用寿命和汽车能耗。

Finally, the steady tire temperature field and rolling resistance under different working conditions are calculated based on the direct solving strategy.

基于直接策略，分析计算了不同工况下的轮胎稳态温度场和滚动阻力。

This article derived the relations of tire deformation stress and strain through the analysis of the force when the tire rolling, establishing a mathematical model of the tire temperature rise mechanism on this basis.

本文通过分析轮胎滚动时的受力情况，对轮胎变形的应力与应变关系进行推导，在此基础上建立轮胎温升机理的数学模型。

Analysis on Temperature Field and Thermal Deformation of Rolling Bearings

滚动轴承的温度场和热变形分析

The results show that finishing temperature and cooling speed of hot rolling can influence the grade of network carbides. With several courses of cold rolling and spheroidizing annealing, finished steel strips get good properties.

结果表明，热轧的终轧温度及冷却速度能影响网状碳化物的级别，采用多道次冷轧和球化退火，可使成品钢带获得良好的性能。

Elimination of Scabs on Oil Pipe Surface by Controlled Temperature Rolling Process

采用控温轧制根除油管表面结疤的研究

Heat generated in the rolling deformation zone is calculated accurately, on the basis of which new calculating model of work roll temperature is established through thermal equilibrium of strip mill and rolling stock.

准确地计算轧制变形区的发热量，通过联立工作辊与轧件的热平衡方程，获得工作辊温度计算新模型；

The comparisons also indicate different dynamic modulus models have a significant influence on the tire rolling resistance, while different thermal boundary conditions have a significant influence on the tire temperature field.

还表明损耗模型对轮胎滚动阻力有显著影响，而热边界条件则对轮胎温度场有显著影响。

The plasticity of rolling sheet was increased obviously with increase of temperature;

温度的升高可明显改善轧制板的塑性；

Analysis of Operation Performance of Air Distribution Valves at Low Temperature on Rolling Stock

铁道车辆空气分配阀的低温作用性能分析

Error of temperature measurement from thermocouple with air pump in the rolling reheat furnace

轧钢加热炉抽气热电偶温度测试误差

Hardening, embrittling and cracking at low temperature of bitumen can be reduced due to improved flexing so as to extend the service life of road and rolling material.

改善沥青的低温屈挠性可减轻沥青低温下的发硬、发脆、龟裂，提高公路、卷材的使用寿命。改善沥青的高温抗流动性能可减轻沥青在高温下的软化流淌。

FEM simulation of temperature field in roughing trains of hot strip rolling

热带钢粗轧机组温度场有限元模拟

The impact test to angle iron at different temperatures showed that the impact energy reduced with the temperature decreased and the rolling process affected the low-temperature toughness greatly in addition to the composition of alloying elements.

在不同温度下的角钢冲击实验结果表明，随着温度的降低，冲击功逐渐降低。除了合金元素的成分对低温韧性的影响外，轧制工艺对低温韧性的影响也很大。

Study on Temperature Field and Thermal Profile of Work Roll in Sheet and Strip Rolling

板带轧制过程工作辊温度场与热辊型研究

Finite element analysis of temperature fields of work roll in hot rolling mill based on ANSYS

基于ANSYS的热轧工作辊温度场的有限元分析

Effect of Homogenization Temperature and Hot Rolling Pass on Morphology of Compound in 3104 Sheet

均匀化温度、热轧道次对3104制罐板化合物形貌的影响

The result shows that the alloy has good cold processing performance, employs reduction 50% and annealing temperature 800 ℃× 1 h for the cold rolling pass, and all quality and characteristic indications of the cold rolled products meet the requirement of technical standard.

研究结果显示，该合金冷加工性能优良，冷轧道次采用50%的变形量和800℃，1h的退火制度，轧制产品的质量和各项性能指标均满足技术标准要求。

The results show that the fine cracks are evolved from surface gas holes of steel billet in the process of high temperature heating and rolling.

结果表明，发纹缺陷是由方坯表面气孔经高温加热→轧制演变成的。