scanning electron microscope的例句大全

Using ordinary pressure plasma, choose different processing power continuous dynamic treatment on aramid fiber surface, using scanning electron microscope and atomic force microscope to show its surface characterization, dynamic contact Angle apparatus can test its surface wettability.

采用常压等离子体，选择不同的处理功率对芳纶纤维表面进行连续动态处理，通过扫描电镜以及原子力显微镜对其表面进行表征，动态接触角仪对其进行表面润湿性能测试。

X-ray diffraction, scanning electron microscope, energy dispersive spectrum and laser Raman spectrum analysis were used to identify thaumasite in paste sample stored in 10% ( in mass) of MgSO_ ( 4) solution at different temperatures.

将浸泡于不同温度的质量分数为10%的MgSO4溶液中的含石灰石粉水泥石试样进行X射线衍射分析、扫描电子显微分析、能谱分析和激光Raman光谱分析。

The pattern of side bend of Mn Si multi layer weld is investigated with side bend test of weld joint, optical microscope and scanning electron microscope analysis. The relationship between weld thermal cycle, heat input and microstructure with pattern of side bend is also discussed.

本文通过焊接接头侧弯试验、光学显微镜和扫描电镜分析，对Mn－Si系多层焊焊缝侧弯形貌进行了研究，探讨了侧弯形貌与焊接热循环、焊接线能量及显微组织之间的关系。

Microcosmic shape of corrosion scales were analyzed by Scanning electron microscope, corrosion scale stratified clearly, which consisted of surface biofilms, stratum compactum and tectorium.

应用扫描电镜对生长环的微观形态进行测试，生长环分层清晰，分别为表面粘垢、易脱落的疏松层和致密层。

Scanning electron microscope showed that pathogens of Jujube rust included the stages of urediniospore and teliospore.

扫描电镜观察发现枣锈病病原菌包括夏孢子和冬孢子阶段。

A transparent γ-LiAlO_2 crystal has been grown by temperature gradient technique ( TGT). ( 001) plane γ-LiAlO_2 crystals annealed in different ambients were studied by scanning electron microscope ( SEM) and X-ray diffraction ( XRD).

利用温度梯度法生长出了透明的γLiAlO2单晶，通过扫描电镜和X射线薄膜衍射分析了不同退火气氛对所切得的（001）晶片表面结构的影响。

The 3-5 μ m non-porous composite microspheres of zirconia and urea-formaldehyde ( UF) resin were used as matrix of HPLAC stationary phase. The diameter and construction of the composite microspheres were judged by scanning electron microscope.

以3－5μm的非多孔二氧化锆与脲醛树脂（UTR）复合物微球用作高效液相亲和色谱固定相的基体，并用扫描电子显微镜检验该基体的结构和粒径。

By means of in-situ tensile test of the specimen of bi-morphic alloys of γ-TiAl, observation upon its corresponding fracture surface with scanning electron microscope, and finite element computation, the tensile fracture mechanism of these alloys is investigated.

通过对双态组织的扫描电镜原位拉伸实验、相应的断裂表面观察以及有限元计算，研究了TiAl基合金双态组织拉伸的断裂机理。

After welding, the optical microscope, the scanning electron microscope, the electron microprobe, the tensile testing machine and the microhardness tester are employed to analyse the microstructure and mechanical property of the joints.

焊后采用光学显微镜、扫描电子显微镜、电子探针、万能拉伸试验机以及显微硬度计等一系列设备对焊接接头的微观结构和力学性能进行了检测分析。

The morphological structure was observed by scanning electron microscope and video-zoom microscope, and the contact angle to water was determined by dynamic tension meter.

用扫描电子显微镜和视频变焦显微镜观察了改性烟用聚丙烯纤维的形态结构，用纤维表面动态张力仪测定了其对水的接触角。

The feature of the deformation and fracture of PET and PAN fibers being in tension in specimen chamber of a scanning electron microscope were observed and the micrographys revealing the process of crack initiation and development and failure of the fibers Were photographed.

在扫描电子显微镜样品室中拉伸PET和PAN纤维，动态观察了纤维的形变和断裂行为，用照片记录了裂缝发生、发展和纤维最终断裂的过程。

The microstructure and morphology of the composites have been characterized by powder X-ray diffraction ( XRD), N2 adsorption, thermogravimetic analysis, transmission electron microscope ( TEM) and scanning electron microscope ( SEM).

所得到的复合物经X-射线粉末衍射、N2等温吸附线、热重分析、透射电镜和扫描电镜等技术对纳米复合物的微观结构和形貌进行系统的表征。

The system of BMI/ BDAP/ PHBHQ is a uniform system analyzed by Dynamic Thermomechanical Analysis ( DMTA) and Scanning Electron Microscope ( SEM).

通过扫描电镜（SEM）和动态力学（DMFA）的分析表明，BMI/BDAP/PHBHQ体系为均相体系。

A special machine with scanning electron microscope ( SEM) used was designed for three point bending test.

设计了一种可用扫描电镜（SEM）动态观察、专门用于三点弯曲试验的特殊装置。

Analysis apparent and interior tissue of the test sample using the optical microscope and scanning electron microscope;

采用光学显微镜和扫描电镜等表征手段对不同干燥方法的试样表面及内部形貌进行了分析；

Different rayon based carbon fiber precursors are studied by means of scanning electron microscope ( SEM), Thermal Mechanical Tester and X-ray diffractometer.

用电镜、纤维热机械仪、X光仪对不同来源的粘胶基碳纤维原丝及其碳丝进行了观察和分析。

The kinds and morphologies of intermediate products obtained during this thermal decomposition process were investigated using integrated thermal analysis, X-ray diffraction, scanning electron microscope, energy dispersive X-ray spectrum and chemical analysis.

采用热重分析、X射线衍射、扫描电镜、能谱分析和化学分析等方法研究中间产物及其形貌。

The relationships between efficiencies and conditions of cell lysis were also studied. Through environmental scanning electron microscope ( SEM), the effects of ultrasound, acid, alkaline and thermal action on the microorganism shape in sludge were analysised.

通过环境扫描电镜（SEM）技术分析了超声波、酸、碱以及热作用对污泥中微生物的形态影响以及各种预处理方法对污泥溶胞效果的影响关系。

In the experiment, the mixture of N_2 and NH_3 is used as the reaction gas, then the sample by the methods of scanning electron microscope ( SEM), X-ray diffraction ( XRD) and Raman scanning is analyzed.

使用N2和NH3的混合气体进行反应，并对样品进行了电子显微镜扫描（SEM），X射线衍射（XRD）和Raman散射分析。

The results of scanning electron microscope ( SEM) showed that there was a clear reaction interface in the Pb-Sb complex sulfide ores particle.

扫描电子显微镜（SEM）结果显示，铅锑复杂硫化矿颗粒存在着一个明显的反应界面。