sealing area的例句大全

If too much solder is used, it may flow past tube stop and clog sealing area.

如果使用的焊料太多, 那么有些焊料可能会流过管道阻挡部位,并堵塞密封区域.

The valve outlet sealing area is also flat. The nut fits on the nipple so the shoulder of the nipple rests on the pushing surface of the nut.

阀门排气口密封区域也是平的。螺母配合在管接口上，因而管接口靠在螺母的螺纹正面。

to make ( a boat) watertight by packing seams with a waterproof material, such as oakum or pitch. a new technology on filling in and sealing against leak with expandable materials is introduced in this paper, which is applied in drilling in limestone area.

堵缝使用防水材料，如麻絮或沥青堵漏缝以使（船）不漏水本文介绍了石灰岩地区钻探施工中，利用液体高膨胀材料充填、堵漏新工艺。

Both effect mentioned above make the near shaft region the weakest area of the whole sealing gap section.

这两个效应使靠近导磁轴一侧的区域成为密封截面上最薄弱环节，是造成较大密封间隙的磁流体密封性能下降的主要原因。

As an improved feature, V cup packings of rubber with fabric and back-up rings of polytetrafluoroethylene are adopted, The total contact area between the sealing lips and the bushing is only 25 to 33 percent of the original packing-bushing contact area.

改进后的密封结构，采用V形橡胶夹布盘根和聚四氟乙烯扶正板，盘根唇部与衬套的接触面积仅为原来的25～33%，减少了发热量。扶正板能自润滑。

Clean the contact area of the agitator shaft and sealing shaft.

清扫鼓吹者轴和密封轴的联系区域.

When serving as the lubricant, MF would maintain at the friction area because of the magnetic force. The lubrication effect is so excellent that MF has been widely used in mechanical sealing and lubrication.

磁性液体作为润滑剂时，能够在磁力作用下保持在摩擦区域中，润滑效果良好，因此被成功的应用于轴承机械的密封和润滑中。

The breech lock closure type heat exchanger is characterized by reliable sealing performance, easy dismantling and assembling, high utilization ratio of heat exchange area and small grounding.

螺纹锁紧环换热器具有密封性能可靠，拆装方便，换热面积的利用率高，结构紧凑，占地面积小等特点。

The sealing surface of the upper& lower valves of the coal lock hopper, required to deposit horniness alloy metal, the depositing area larger, the depositing metal high hardness, and the most strict requirements in quality.

气化炉的煤锁上、下阀门密封面要求堆焊硬质合金，堆焊面积大，硬度高，质量要求极其严格。

At present, the important parameters for evaluating the sealing ability of covering bed involve displacement pressure, porosity, permeability, density, mid-value semidiameter of pore, specific surface area and so on.

目前，评价盖层封闭能力的主要参数有岩石的排替压力、孔隙率、渗透率、密度、孔隙中值半径、比表面等。

The analysis of sealing condition of structural trap in Tianchang area in Anhui Province

安徽天长地区构造圈闭封堵特性的分析